Installed previously ordered spray arms. Cycle tested unit. All checks good. Customer declined to retain old part.

"Installed previously ordered hidden bake element on lower oven, cycle tested unit to verify repair, all checks good. Advised customer of unsecured ground wire, advised electrician is needed for ground. Collected payment via check."

"Customer concern is that dryer is making a squealing noise during operation. Found failed idler causing noise durring operation. Needs new idler and belt. Installed new idler bracket and belt, cleaned and lubricated rollers, vacuumed lint from dryer cabinet, preformed airflow test pass. All checks good. ; used 1 W10837240 (BRACKET), and 1 661570V (BELT) from stock"

"Customer concern is that dryer will not start cycle and is not displaying time on display. Found failed safety relay on control board causing dryer not to operate, installed SQT provided main board, cycle tested dryer and preformed airflow test failed (red) advised customer dryer vent needs service before resuming operation of dryer. Customer signed airflow acknowledgement. Returning two SQT provided parts."

"Customer concern is that dryer is not drying clothes all the way on sensor dry. Pulled error codes, F4E4,F2E1,F4E4. Preformed airflow test pass. Preformed temperature checks good internal temperatures max at 178.3?F. On timed cycle, 169.3 ?F on normal cycle, cleaned and calibrated moisture sensors, adjusted customer prefered dryness level by one."