"Customer concern is that range display is not working. Confirmed 120v to main control, found failed control board causing oven not to operate. Needs new control board. Advised control board is back ordered and will take time to recive. Custome4 declined repair at time of service. Collected diagnostic fee via card."

"Customer concern is that dryer produces steam or smoke during operation overheating. Preformed airflow test, failed (yellow). Preformed temperature checks vent on high. Preformed temperature checks vent off, in range. Unable to duplicate customer concern of unit shutdown and steam. Shortened vent hose. Cycle tested unit all checks good . Advised customer dryer vent needs to be cleaned. Advised customer on proper loading practices. Advised customer to monitor and record video if issues persist. Collected 95+tax via"

Customer concern is that dishwasher is not draining all the way. Found clog in airgap. Preformed service cycle to confirm operation of drain motor. Cycle tested dishwasher all checks good.

"Customer concern is that the washer is not draining. Pulled error codes. Dc,Ub,dc,ub,Ac7,dc,ub. Manual mode verified good operations of drain pump. Spin test good, found signs of oversuds. Cycle tested washer with a load, washer wil pause at 7 minutes and will not spin. Found failed main PCB,inverter and hall sensor. Needs new main PCB, inverter and hall sensor. Advised customer PCB is discontinued and may take time to recive. AHS to supply. Requires auth.; ordrng 1 DC92-01989D (Main PCB) and 1 DC92-01531C (ASSY PCB KIT) and 1 DC31-00098A (MOTOR BLDC)"

"Installed previously ordered wash pump, cycle tested unit. All checks good"