We serviced a
GE REFRIGERATOR
Model PVD28BYNBFS
Near Frisco, TX 75034
Chad A.
Job Details:
12/07/2023
Customer stated unit not making ice. On arrival unable to cycle ice maker at all. Replaced ice maker and cycled for operation. Water fill checked ok and temperatures good. Ready to make ice.
We serviced a
LG WASHER-TOPLOAD
Model WT1101CW
Near Tacoma, WA 98404
Cameron M.
Job Details:
12/07/2023
"Customer concern is that washer leaks large volumes of water during operation. Preformed visual inspection of unit. Found large hole in tub to pump drain hose, causing large leak when water is induced. Also found cracked and leaking dispenser hoses at inlet asm. Needs new bleach dispenser, fabric softener hose,tub to pump drain hose and hose clamps. Customer declined repair at this time. Collected 129+tax via card payment."
We serviced a
FRIGIDAIRE DISHWASHER
Model FGID2466QF7A
Near Garland, TX 75040
Lane
Job Details:
12/07/2023
Replaced controls and performed multiple function tests. All functions checked good at time of service.
We serviced a
KITCHENAID WALL OVEN
Model KEBK101BSS00
Near Richardson, TX 75082
Lane
Job Details:
12/07/2023
Installed thermal fuse and performed multiple function tests. All functions checked good at time of service.
We serviced a
GE DISHWASHER
Model CDT805M5N3S5
Near Lakewood, WA 98499
Cameron M.
Job Details:
12/06/2023
"Customer concern is that washer produces poor wash result, intermittent dispenser not opening. Cycle tested unit,found oversuds conditions present flushed unit 15x. Found no mechanical defects at time of service. Advised customer on regular cleaning intervals. Advised customer on using high quality detergent. Advised customer to monitor and call if issues persist ."
We serviced a
GE DRYER-ELECTRIC
Model GTD65EBSJ4WS
Near Puyallup, WA 98372
Cejay
Job Details:
12/06/2023
"Installed previously ordered main control board, set unit personality to 3, cycle tested dryer all checks good."
We serviced a
LG WASHER-FRONTLOAD
Model WM3170CW/01
Near Rockwall, TX 75032
Patrick
Job Details:
12/06/2023
"Customer concern, unit not draining. Confirmed. Found detached impeller on drain pump. Replaced from truck stock. Tested unit. All checks good. ; used 1 4681EA2001T (Drain pump) from stock"
We serviced a
KENMORE RANGE
Model 79046781906
Near Gig Harbor, WA 98335
Cameron M.
Job Details:
12/06/2023
"Installed previously ordered element and preformed harness repair, cycle tested unit. All checks good. Collected remainder balance via card payment"
We serviced a
GE DISHWASHER
Model GDF510PSD4SS
Near Wylie, TX 75098
Lane
Job Details:
12/06/2023
Customer stated dishwasher doesn't heat. Performed diagnostics found faulty lood switch assembly. Replaced flood sensor and performed multiple function tests. All functions checked good at time of service. ; used 1 WD21X10519 (Floor switch) from stock
We serviced a
SPEED QUEEN WASHER-TOPLOAD
Model AWN39RSN116TW01
Near Dallas, TX 75220
Lane
Job Details:
12/06/2023
Customer stated washer lid lock broke. Performed diagnostics confirmed lock is broken. Replaced lock and performed multiple function tests. All functions checked good at time of.
We serviced a
GE DISHWASHER
Model PDP715SYV0FS
Near Irving, TX 75063
Lane
Job Details:
12/06/2023
I stalled new wafer valve with connector kit. Performed multiple function and leak tests after repair. All functions checked good at time of service.
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW4816FW2
Near Garland, TX 75043
Patrick
Job Details:
12/06/2023
"Replaced inlet valve, tested unit. All checks good. Awq"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDB01
Near Heath, TX 75126
Patrick
Job Details:
12/06/2023
"Customer concern, lower door will not close. Found lower hinge plate loose. Tightened plate. Tested unit. All checks good."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT720PADM2
Near Irving, TX 75063
John
Job Details:
12/05/2023
Installed new console. All checks good.
We serviced a
MAYTAG DISHWASHER
Model MDB9959SKZ0
Near McKinney, TX 75072
Chad A.
Job Details:
12/05/2023
Replaced user interface and all working properly. No other failures found.
We serviced a
GE REFRIGERATOR
Model PVD28BYNCFS
Near Rockwall, TX 75087
Patrick
Job Details:
12/05/2023
Replaced im. Cleared codes. Tested unit. All checks good.
We serviced a
LG DISHWASHER
Model LDF7774ST
Near Garland, TX 75043
Patrick
Job Details:
12/05/2023
"Customer concern, unit leaking from air gap. Confirmed. Found clogged drain. Cleared. Tested unit. All checks good."
We serviced a
WHIRLPOOL WASHER-FRONTLOAD
Model WFW5620HW0
Near Buckley, WA 98321
Cejay
Job Details:
12/05/2023
"Customer concern is that washer is showing SD. SD error is SUD or oversuds error in owners manual. Pulled error codes. F0E2, found unit struggles to drain, found clog in drain filter causing SD or F0E2 error. Removed clog, preformed diagnostics cycle, cycle tested unit all checks good."
We serviced a
KENMORE LAUNDRY CENTER
Model 11088752796
Near Dallas, TX 75243
Lane
Job Details:
12/05/2023
Installed lispd switch and performed multiple function tests. All functions checked good at time of service.
We serviced a
KENMORE DRYER-ELECTRIC
Model 79680311900
Near Garland, TX 75042
Patrick
Job Details:
12/05/2023
"Customer concern, no heat. Confirmed. Found clogged discharge vent in wall. Found open hi limit, open control thermostat. Replaced from truck stock. Tested unit. Good heat. Customer must have vent professionally cleaned to prevent future failures. ; used 1 6931EL3001F (Hi limit), and 1 6931EL3003D (Tco) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW5310VQ0
Near Dallas, TX 75219
Lane
Job Details:
12/05/2023
Customer stated washer doesn't wash well. Performed diagnostics found waher functions normally. Due to dryer not venting correctly large amount of lent is being left on clothes. All functions checked good at time of service.
We serviced a
MAYTAG DISHWASHER
Model MDB7749AWM2
Near Lake Tapps, WA 98391
Cejay
Job Details:
12/05/2023
"Installed previously ordered control panel and thermal fuse, cycle tested unit to verify repair, all checks good."
We serviced a
LG WASHER-FRONTLOAD
Model WM8000HVA
Near South Hill, WA 98374
Cameron M.
Job Details:
12/05/2023
"Customer concern is that washer produces le error and not spinning. Verified customer concern of unit not spinning via service mode and rinse and spin. Preformed continuity test of motor harness, good continuity. Preformed ohms check of rps sensor, failed. Found failed rps sensor causing unit to not spin. Needs new rps sensor. Installed new rps sensor. Cycle tested unit. All checks good. Advised customer on regular cleaning intervals. Advised customer on using high quality detergent. Customer retained old part collected payment via ezez; used 1 6501KW2002A (RPS SENSOR) from stock"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA01
Near Mesquite, TX 75150
Patrick
Job Details:
12/05/2023
Replaced motion assy and dispenser. Tested unit. Ran rinse cycle. Good complete. All checks good.
We serviced a
GE WALL OVEN
Model PTD7000SN4SS
Near McKinney, TX 75072
Chad A.
Job Details:
12/05/2023
Customer stated lower oven light will not go off. Stem for switch broken off latch assembly. Replaced latch assembly and all functioning properly. No other failures found at time of service.
We serviced a
OTHER DISHWASHER
Model DDT595SSJ2SS
Near Irving, TX 75062
Lane
Job Details:
12/04/2023
Customer stated dishwasher doesn't dry. Performed diagnostics found thermal limiter.tripped. Reset limiter and performed function test. All functions checked good at time of service.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC465HW3
Near Tacoma, WA 98445
Cejay
Job Details:
12/04/2023
"Customer concern is that washer is not making starting a cycle and is making a noise. Upon arrival unit was unplugged. Upon plugging in unit drain motor is running continuously. Unable to enter service mode. Removed drain motor and shifter harness from main control, entered service mode, no stored errors. Found unit stuck in cycle, reset washer, preformed calibration cycle, all checks good."
We serviced a
GE REFRIGERATOR
Model DTS18ICRBRWW
Near Irving, TX 75062
Lane
Job Details:
12/04/2023
Customer stated refrigerator stopped cooling. Performed diagnostics found faulty defrost thermostat. Replaced thermostat and.performed function test. All functions checked good at time of service.
We serviced a
FRIGIDAIRE FREEZER
Model FFFU16F2VV
Near Grand Prairie, TX 75052
Lane
Job Details:
12/04/2023
Customer stated freezer stopped cooling. Performed diagnostics found compressor extremely hot and not pumping freon. Sealed system is defective.
We serviced a
KITCHENAID DISHWASHER
Model KUDS03FTSS3
Near Dallas, TX 75205
Lane
Job Details:
12/04/2023
Installed new sump assembly and performed multiple function and leak tests. All functions checked good at time of service.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28T5001SR/AA
Near Rockwall, TX 75087
Lane
Job Details:
12/04/2023
Customer stated refrigerator makes abnormal noise. Performed diagnostics found ice build-up inside freezer. Advised customer on freezer door weight limits causing door closure issues. No fault codes stored at tme of service. All functions checked good at time of service.
We serviced a
MAYTAG DRYER-ELECTRIC
Model MED6230HW0
Near Mesquite, TX 75149
Patrick
Job Details:
12/01/2023
"Replaced ui, tested. Replaced main control, tested. All checks good"
We serviced a
KITCHENAID DISHWASHER
Model KUDS30IXBL1
Near Irving, TX 75062
John
Job Details:
12/01/2023
Installed new control board and repaired wire harness. Ran service cycle. All checks good.
We serviced a
GE DISHWASHER
Model ZDT925SPN7SS
Near Dallas, TX 75209
John
Job Details:
12/01/2023
Installed new control board. All checks good.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE45R6100C/A3
Near Spanaway, WA 98387
Cejay
Job Details:
12/01/2023
"Customer concern is that dryer is not heating. Found opene element causing dryer not to heat.needs new element assembly. Installed new element, cycle tested unit all checks good. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
We serviced a
GE DISHWASHER
Model GDT530PSP5SS
Near Spanaway, WA 98387
Cejay
Job Details:
12/01/2023
"Customer concern is that dishwasher is showing H20 on display. Pulled error codes, F86 no Fill failure, F56 drain failure. Verified unit fills with water via newfi, found seized wash motor. No motor movement is causing H20 error. Needs new washmotor and pressure sensor. Customer declined repair at time of service."
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW5105HW1
Near Spanaway, WA 98387
Cejay
Job Details:
12/01/2023
"Customer concern is that washer is making a squealing noise during operation. No stored errors. Found signs of maching bottoming out due to heavy loads, damage and wear to shield and cam. Installed new belt and cam, preformed DLMS calibration cycle, found coins under agitator, removed coins, cycle tested unit all checks good.; used 1 W10721967 (CAM), and 1 W11239857 (BELT) from stock"
We serviced a
LG WASHER-FRONTLOAD
Model WM3370HWA/ 01
Near Graham, WA 98338
Cejay
Job Details:
12/01/2023
"Customer concern is that washer is not drain. Found stripped drain motor causing unit not to drain. Needs new drain pump motor. Installed new drain motor, preformed service cycle for leaks and to verify repair. All checks good. ; used 1 4681EA2001T (DRAIN PUMP) from stock"
We serviced a
ELECTROLUX REFRIGERATOR
Model EI26SS30JS3
Near Frisco, TX 75033
Patrick
Job Details:
12/01/2023
Replaced dispenser module. Tested unit. All checks good.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC300VW0
Near Dallas, TX 75227
John
Job Details:
12/01/2023
Installed new inlet hose. All checks good.
We serviced a
KENMORE DRYER-ELECTRIC
Model 11066732500
Near The Colony, TX 75056
John
Job Details:
12/01/2023
Installed new motor and blower wheel. All checks good.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB835DW3
Near Tacoma, WA 98446
Cejay
Job Details:
12/01/2023
Customer concern is that washer is producing a smell. Custome notes no other concern with washer. Advised customer on using high quality detergent and qualities and leaving lid open when not in use for proper ventilation. No mechanical or component failures at time of service.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVW7232HC0
Near Murphy, TX 75094
Chad A.
Job Details:
11/30/2023
Replaced min control and door lock. Cycled to test. Water fill good and door lock operating properly. No other failures found at time of service.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE50R5400V/A3
Near Carrollton, TX 75006
Chad A.
Job Details:
11/30/2023
Customer stated unit vibrating and noisy. Removed blower housing and cleared debris from blower wheel that was causing out of balance vibration. Cycled to test and found no other failures.
We serviced a
MAYTAG WASHER-FRONTLOAD
Model MFW9700SQ1
Near Dallas, TX 75225
John
Job Details:
11/30/2023
Customer concern is washer sometimes goes off balance with smaller loads and then leaves clothes wet. Entered service mode and found off balance error. Ran service diagnostic cycle. All checks good. Found build up of small garmets trapped inside door boot causing issue. Advised Customer about checking that area after each load. All checks good.
We serviced a
KENMORE WASHER-TOPLOAD
Model 11023932200
Near Carrollton, TX 75007
John
Job Details:
11/30/2023
"Installed new gearcase, hose and clamp. All checks good."
We serviced a
KENMORE REFRIGERATOR
Model 10658163703
Near Dallas, TX 75206
Lane
Job Details:
11/30/2023
Installed new ice maker module. Confirmed line voltage is good. Optical sensors are responding correctly during testing. Ice maker will need to get down to freezing temperature for system to fill with water. All functions checked good at time of service.
We serviced a
MAYTAG DRYER-ELECTRIC
Model MEDX655DW1
Near Dallas, TX 75206
Lane
Job Details:
11/30/2023
Installed timer and confirmed unit does cycle off automatically. All functions checked good at time of service.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT705PAKZ0
Near Forney, TX 75126
Patrick
Job Details:
11/30/2023
Replaced sump. Tested unit. All checks good.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED5300VW0
Near Forney, TX 75126
Patrick
Job Details:
11/30/2023
"Customer concern, unit will not start. Found broke door sw. Replaced from truck stock. All checks good. Unit failed vent test. Passed when disconnected. Customer must have vent cleaned to prevent future failures.; used 1 WP3406107 (Door sw) from stock"
We serviced a
GE DRYER-ELECTRIC
Model GFD55GSSN1WW
Near Rowlett, TX 75088
Patrick
Job Details:
11/30/2023
"Customer concern, unit takes multiple cycles to dry. Unit failed air test. When disconcerted air test passed. Cleared lint from discharge through wall. Tested unit. All checks good."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Garland, TX 75044
Patrick
Job Details:
11/30/2023
Replaced ice maker. Ran manual test. All checks good
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB765FW3
Near Orting, WA 98360
Branden W.
Job Details:
11/29/2023
Customer concern is that washer makes a ticking noise. Errors stored F0E4 (temperature too high) F3E2 (inlet temperature thermistor) replaced inlet valve. Found ticking noise coming from rear suspension rods. Cleaned all suspension rod cups and saddles. All checks good. ; used 1 W11165546 (VALVE) from stock
We serviced a
GE WASHER-FRONTLOAD
Model GFW550SSN5WW
Near University Place, WA 98466
Cejay
Job Details:
11/29/2023
"Customer concern is that washer is wobbly and shakes along. Verified washer is level and shipping bolts are removed. Mechanical checks on basket spring and dampers good. Pulled error codes, F38,F89,F92. Preformed damper diagnostic test, confirmed operation of damper. Preformed spin diagnostic test pass, errors did not return. Cycle tested washer with a load, unit is on pedestal, movement is normal for pedestal applications. No mechanical or component failures at time of service. Advised customer 12v found at dryer vent hose. Advised electrician is recommended."
We serviced a
MIDEA DRYER-ELECTRIC
Model MLE45N3BMG
Near University Place, WA 98467
Cejay
Job Details:
11/29/2023
"Customer concern is that dryer will not start, attempts to start but dose not spin. Found debris in blower causing motor to stall, removed debris, reassembled dryer, preformed airflow test failed (yellow) Preformed temperature checks good. Advised customer dryer vents need service. All checks good."
We serviced a
KITCHENAID RANGE
Model KGRS807SSS00
Near DuPont, WA 98327
Cejay
Job Details:
11/29/2023
"Installed previously ordered cooling fan, cycle tested unit to verify repair, all checks good. Left unit Uninstalled at customer request for cleaning."
We serviced a
LG WASHER-FRONTLOAD
Model WM3170CW
Near Enumclaw, WA 98022
Cejay
Job Details:
11/29/2023
"Customer concern is that washer is leaking, Customer has replaced door seal. Visually inspected door seal, fill hoses, inlet valves, inspected underneath unit no signs of water. Found signs of heavy oversuds from rear vent. Preformed service diagnostic cycle, could not replicate leak. Advised customer on using high quality detergent with proper quantities and running regular cleaning cycles."
We serviced a
GE DISHWASHER
Model GDT655SMJ5ES
Near Spanaway, WA 98387
Cejay
Job Details:
11/29/2023
"Customer concern is that dishwasher is not draining, standing water in tub upon arrival, pulled water through drain hose, cycle tested, unit failed to drain, confirmed 120v to drain motor, checked drain pump for clog, checked for blockage at check valve, cycle tested unit, dishwasher now drains, stress tested drain motor, all checks good."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF510PAYS6
Near Coppell, TX 75019
Chad A.
Job Details:
11/29/2023
Replaced drain hoses and cycled to test. No leaks and draining good. No other failures detected.
We serviced a
LG DISHWASHER
Model LDF8764ST
Near Irving, TX 75063
Lane
Job Details:
11/29/2023
"Customer stated dishwasher would not respond while running a cycle. No code displayed for custo,er. Unit has been powerd down for several days. No codes stored. Performed function test with no failures. Dishwasher was serviced within two months by a different service company. Advised customer to take picture of console if dishwasher fails again."
We serviced a
GE DISHWASHER
Model GLD4408R00BB
Near Dallas, TX 75287
Lane
Job Details:
11/29/2023
Customer stated dishwasher had soapy suds water in front of unit after use. Performed diagnostics ran function test with no water leaking from dishwasher. Found significant leak under sink coming from plumbing. Drain hose runs through air gap preventing any flow back. Unable to recreate any leaks coming from dishwasher.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC565FW0
Near Dallas, TX 75219
Lane
Job Details:
11/29/2023
Customer stated washer would not advance through cycle. Performed diagnostics found one code stored for target speed. Spin basket was stuck. Freed up basket and performed function test after repair. All functions checked good at time of service.
We serviced a
WHIRLPOOL RANGE
Model WFC150MLAW0
Near Irving, TX 75062
Lane
Job Details:
11/29/2023
Installed new main control with oven probe sensor. Performed full function test after. All functions checked good at time of service.
We serviced a
LG WASHER-FRONTLOAD
Model WM5000HVA
Near Garland, TX 75044
Patrick
Job Details:
11/29/2023
"Customer concern, while away on vacation, unit filled itself up and flooded the house. Operating normally on arrival. Recommend replace inlet valves. Tested unit. All checks good. ; used 1 5220FR2006H (Inlet valve), and 1 5220FR2075L (Inlet valve triple) from stock"
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF45R6100AC/US03
Near Dallas, TX 75217
Patrick
Job Details:
11/29/2023
"Customer concern, unit display sud or 5c error code. Drain codes. Cleared debris from impeller. Tested unit. All checks good."
We serviced a
SAMSUNG REFRIGERATOR
Model RF2775501SR/AA51
Near Heath, TX 75032
Patrick
Job Details:
11/28/2023
Replaced ice maker and auger. Cleared ice from compartment. All checks good.
We serviced a
GE COOKTOP
Model JP3030SJ4SS
Near Rockwall, TX 75087
Patrick
Job Details:
11/28/2023
Replaced infinite sw. Tested unit. All checks good.
We serviced a
GE WASHER-TOPLOAD
Model PTW600BSR1WS
Near Carrollton, TX 75006
Lane
Job Details:
11/28/2023
Customer stated washer gets out of balance and will not complete cycle. Performed diagnostics found no stored fault codes. Ran function tests through onboard diagnostics. Instructed customer on load size and sorting with proper cycle selection.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED8500DC4
Near Rockwall, TX 75087
Patrick
Job Details:
11/28/2023
"Replaced element, tested unit on no heat, confirmed no heat. Tested on high heat, confirmed high heat. All checks good."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WA45H7000AW/A2
Near Carrollton, TX 75006
John
Job Details:
11/28/2023
Installed new suspension rods and inlet valve assy. All checks good.
We serviced a
GE WASHER-TOPLOAD
Model GTW335ASN1WW
Near Sumner, WA 98390
Branden W.
Job Details:
11/28/2023
Installed new suspension rods and drain hose. Leveled washer. Cycle tested through rinse and spin. All checks good.
We serviced a
GE DISHWASHER
Model GHDA674N00BG
Near Tacoma, WA 98467
Branden W.
Job Details:
11/28/2023
"Customer concern is that dishwasher does not drain. Unit taken apart prior to service. Reassembled unit. Cycle tested x30. No drain issues at time of service. Found spray arm clogged causing poor rotation. Drain pump is most likely if issue returns. Customer will replace spray arm. No repairs at this time.spray arm needed is WD22X10046Collect pay,enter via check."
We serviced a
FISHER PAYKEL DISHWASHER
Model DD24D19N
Near Gig Harbor, WA 98332
Branden W.
Job Details:
11/28/2023
Customer concern is that both drawers were making noise and running with no water. Upper and lower drawer error A1 (not filling) error stored. No other errors stored. Unit not running as described at time of service. Cycle tested both drawers several times. No issues found. Possible over suds issue. Advised to monitor and call if issue returns.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV45H7000EW/A2 02
Near Spanaway, WA 98387
Cejay
Job Details:
11/28/2023
"Customer concern is dryer is not heating. Preformed airflow test pass. Confirmed 240v at terminal. Found open element causing dryer not to heat, needs new element. Installed new element, cycle tested dryer to verify repair, confirmed rise and fall of temperatures, all checks good. ; used 1 DC47-00019A (HEATER-DRYER) from stock"
We serviced a
JENN-AIR RANGE
Model JGS9900CDS02
Near Spanaway, WA 98387
Cejay
Job Details:
11/28/2023
"Tenet concern is oven is not heating. 0 amps at ignitor, no continuity at ignitor, confirmed 120v to ignitor, found failed ignitor causing oven not to heat, needs new ignitor. Installed new bake ignitor, cycle tested unit to verify repair, all checks good. Sent payment link via text. Customer unavailable for signature.; used 1 WB13K21 (OVEN IGNITER-12' LEAD W/NUTS) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW5057LW0
Near Frisco, TX 75034
Chad A.
Job Details:
11/28/2023
Customer stated washer noisy In spin. During testing found unit squealing in high speed spin. Tub secure and running in balance. Replaced drive belt and cycled to test. Noise gone and unit running quiet. ; used 1 W11239857 (BELT) from stock
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC200XW2
Near Tacoma, WA 98443
Branden W.
Job Details:
11/28/2023
Installed new suspension rods and tub ring. Cycle tested. All checks good. Secured drain hose.
We serviced a
FRIGIDAIRE DISHWASHER
Model FDB2310LCC2
Near Irving, TX 75062
Lane
Job Details:
11/28/2023
Customer stated dishwasher is unresponsive. Performed diagnostics found control panel locked. Ran dishwasher to confirm operation. All functions checked good at time of service.
We serviced a
HOTPOINT WASHER-TOPLOAD
Model HTW240ASK6WS
Near Dallas, TX 75211
Lane
Job Details:
11/28/2023
Customer stated washer womt complete cycle. Performed diagnostics found multiple codes for out of balance condition. Inspected drive train and found belt stretched out. Replaced belt and performed multiple function tests. All functions checked good at time of service.; used 1 WH01X27538 (Belt) from stock
We serviced a
HOTPOINT DRYER-ELECTRIC
Model HTDX100ED4WW
Near Garland, TX 75040
Lane
Job Details:
11/28/2023
Installed timer with knob. Performed multiple function tests after repair. All functions checked good at time of service.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT920SADM2
Near Richardson, TX 75082
Lane
Job Details:
11/28/2023
Installed new pump and motor. Performed multiple function and leak tests after repair. All functions checked good at time of service.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV40J3000EW/A2 02
Near Eatonville, WA 98328
Cejay
Job Details:
11/28/2023
"Customer concern is that dryer is not heating. Preformed airflow test pass. Confirmed 240v at terminal, found open element causing dryer not to heat, needs new element. Installed new element, cycle tested dryer, all checks good. Applied military discount to labor. Collected payment via card. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Puyallup, WA 98374
Cejay
Job Details:
11/28/2023
"Customer concern is that dishwasher is flashing clean light, making a beeping noise and not starting a cycle. Pulled error codes. 8-4,10-2,8-4. Leak tray full of dirty water, cleaned tray and sensor, preformed service diagnostic cycle. Found unit had lost left side mounting screw and unit not level causing leak out of left side overfill hose, leveled unit, cycle tested unit, all checks good, advised customer on running regular cleaning cycles."
We serviced a
GE WASHER-TOPLOAD
Model GTW335ASN2WW
Near Lewisville, TX 75067
Lane
Job Details:
11/28/2023
Customer statedwasher will not lock lid and sometimes won't spin. Performed diagnostics found faulty lid lock. Advised customer on load size and sorting. All functions checked good at time of service. ; used 1 WH08X32697 (Lid lock) from stock
We serviced a
GE DRYER-ELECTRIC
Model GTD33EASK0WW
Near Sumner, WA 98391
Cameron M.
Job Details:
11/27/2023
"Customer concern is that dryer timer does not rotate. Found broken knob ,causing inability selecting cycle. Also found seized timer, causing inability selecting cycle. Needs new knob and timer. Installed new knob and timer. Cycle test unit all checks good."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model NOTAVAILABLE
Near Dallas, TX 75227
Patrick
Job Details:
11/27/2023
"Unit powered on normally, ran test cycle. Good tumble, good heat. No fault detected at this time."
We serviced a
GE WASHER-FRONTLOAD
Model GFW850SPN4RS
Near Carrollton, TX 75010
Lane
Job Details:
11/27/2023
Customer stated washer intermittently leaks. Performed diagnostics found excessive suds causing the issue. Advised customer on detergent amount and performing self clean cycle with appropriate products. All functions checked good at time of service.
We serviced a
GE DISHWASHER
Model GSD6660G02SS
Near Dallas, TX 75219
Lane
Job Details:
11/27/2023
Installed ordered spray arms and performed function test. All functions checked good at time of service.
We serviced a
KENMORE DRYER-ELECTRIC
Model 11085872401
Near Plano, TX 75074
John
Job Details:
11/27/2023
Came to install new heater. Found new heater broken out of box and unable to be used. Replaced heater from truck stock parts. All checks good.; used 1 WP3387747 (ELEMENT) from stock
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE54R7600C/A3
Near Dallas, TX 75237
Patrick
Job Details:
11/27/2023
Replaced air seal. All checks good.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED5620HW2
Near Buckley, WA 98321
Cameron M.
Job Details:
11/27/2023
Installed previously ordered parts. Cleaned and calibrated moisture sensor. Cleaned and vacuumed inside of unit. Cycle tested unit. All checks good
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC465HW3
Near Dallas, TX 75211
Patrick
Job Details:
11/27/2023
"Replaced capacitor and harness, tested unit. All checks good."
We serviced a
GE DRYER-ELECTRIC
Model PTD90GBPT1RS
Near Rockwall, TX 75087
John
Job Details:
11/27/2023
"Customer concern is dryer making noise and then recently stopped. Ran diagnostics, no abnormal noise found. Removed top, no debris found between drum and bearing. All checks good."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAKZ0
Near Buckley, WA 98321
Cameron M.
Job Details:
11/27/2023
"Installed previously ordered console and ui , cycle tested unit. All checks good"
We serviced a
SAMSUNG RANGE
Model NX60A6311SS/AA
Near Garland, TX 75041
Patrick
Job Details:
11/27/2023
Replaced control and ui. Tested unit. All checks good.
We serviced a
MAYTAG DRYER-ELECTRIC
Model MEDX655DW1
Near Eatonville, WA 98328
Cameron M.
Job Details:
11/27/2023
"Customer concern is that dryer produces noise during operation and multiple cycles to dry clothes. Found seized idler pully, causing squealing noise during operation. Also found seized rollers, cycle squealing noise during operation and rubber transfer to drum needs new rollers and idler pully. Installed new rollers and idler pully. Cleaned and vacuumed inside of unit. Cleaned and calibrated moisture sensor. Cycle tested unit. All checks good. Customer retained old parts Collected payment via ; used 1 WP691366 (PULLEY-IDR), and 2 WPW10314173 (DRUM ROLLER) from stock"
We serviced a
GE OTHER
Model PEB7227DL4BB
Near Dallas, TX 75230
Lane
Job Details:
11/27/2023
Customer stated microwave is not functioning properly. Performed diagnostics found customer witnessed steam escaping from unit. Performed multiple function tests. All functions checked good at time of service.
We serviced a
GE WASHER-FRONTLOAD
Model GFW850SPN1RS
Near Coppell, TX 75019
John
Job Details:
11/27/2023
Installed new drain pump assy. All checks good.
We serviced a
KITCHENAID COOKTOP
Model KECD807XBL00
Near Irving, TX 75063
Chad A.
Job Details:
11/22/2023
Replaced cooktop and fan switch. All operating properly and no other failures detected n
We serviced a
MAYTAG WASHER-FRONTLOAD
Model MHW5630HW0
Near Coppell, TX 75019
Chad A.
Job Details:
11/22/2023
Customer concern of odor and how to clean. During inspection found door boot to be clean and unit draining properly. Explained to customer on what products to use for cleaning and removing odor. No failures detected at time of service.