We serviced a
KITCHENAID DISHWASHER
Model KDPE234GPS0
Near Prosper, TX 75078
Chad A.
Job Details: 09/14/2023
Replaced heater and sensor. Cycled to test heater and working good.
We serviced a
LG WASHER-FRONTLOAD
Model WM8000HVA
Near Bonney Lake, WA 98391
Branden W.
Job Details: 09/14/2023
Customer concern is that washer leaks. Found hot water inlet valve solenoid leaking. Installed new inlet valve. Vacuumed water from tray under washer. Cycle tested. All checks good. Left failed part as it caused a leak. ; used 1 5220FR2006H (INLET VALVE (HOT)) from stock
We serviced a
GE DISHWASHER
Model GDF520PGD6WW
Near Bonney Lake, WA 98391
Branden W.
Job Details: 09/14/2023
Customer concern is that dishwasher does not wash. Found unit washes but detergent is not dispensing. Also found heater not running due to failed thermistor. Needs new dispenser and float switch assembly. ; ordrng 1 WD12X32798 (DETERGENT MODULE) and 1 WD21X10519 (switch flood) and 1 WD21X22598 (sensor)
We serviced a
KENMORE WASHER-FRONTLOAD
Model 79631552610
Near Garland, TX 75040
Patrick
Job Details: 09/14/2023
Replaced console assy. Tested unit. All checks good.
We serviced a
KENMORE WASHER-TOPLOAD
Model 11022242510
Near Dallas, TX 75228
John
Job Details: 09/14/2023
"Performed MPA check. Unit fills, agitates, spins, and drains as designed. All checks good."
We serviced a
GE DISHWASHER
Model PDW7800J01BB
Near Garland, TX 75041
Lane
Job Details: 09/14/2023
Customer stated dishwasher is unresponsive. Performed diagnostics found faulty neutral circuit.. advised interlock assembly be replace. All other functions checked good at time of service.
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SR/AA 51
Near Wylie, TX 75098
Lane
Job Details: 09/14/2023
Installed new auger assembly and performed multiple function tests. All functions checked good at time of service.
We serviced a
FRIGIDAIRE DISHWASHER
Model FGID2474QF4B
Near Dallas, TX 75228
John
Job Details: 09/14/2023
"Customer concern is DW LED lights not working. Conformed half of consol LED's and display not illuminating but buttons responding. Ran quick cycle, unit functioning properly aside from consol. Needs new consol and UI board.; ordrng 1 117512430 (Control panel) and 1 807022404 (UI board)"
We serviced a
KITCHENAID RANGE
Model KSDB900ESS3
Near Gig Harbor, WA 98335
Cameron M.
Job Details: 09/14/2023
Installed previously ordered fan assembly. Cycle tested unit. All checks good. Collected remainder balance via card payment. Customer retained old part.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV40J3000EW/A2 02
Near Buckley, WA 98321
Branden W.
Job Details: 09/14/2023
Customer concern is that dryer makes screeching noise. Found nickel lodged in drum track. Removed coin. Cleaned lint trap. Cycle tested. All checks good.
We serviced a
WHIRLPOOL RANGE
Model 79094229400
Near Eatonville, WA 98328
Branden W.
Job Details: 09/14/2023
"Customer concern is that handle and front glass keeps coming off. Left burners don't work sometimes. Found door handle stripping out causing it to come loose. Found front left burner and receptacle burned. Found no issues with other burners. Needs new handle, trim, burner, and receptacle. Ordering parts. ; ordrng 1 316442301 (element,lg) and 1 5303935058 (terminal block kit) and 1 5304475890 (handle) and 1 316575501 (cap)"
We serviced a
FRIGIDAIRE DISHWASHER
Model FDBB240FS2
Near Tacoma, WA 98418
Cameron M.
Job Details: 09/14/2023
"Customer concern is that dishwasher does not advance from was to rinse cycle unit will run continuously without advance. Cycle tested unit. Found worn contacts in timer, causing unit to not advance. Needs new timer. Advised customer parts show NLA. AHS TO SUPPLY REQUIRES AUTH ; ordrng 1 154495901 (TIMER), states that autho needed"
We serviced a
GE DRYER-ELECTRIC
Model GTDP220EF5WW
Near South Hill, WA 98374
Cameron M.
Job Details: 09/14/2023
"Customer concern is that dryer produces noise during operation found drum wearing through front panel and case assembly. Also found failed front bearing, causing noise during operation. Found failed rear bearing, causing drum to ride forward and contact case and front panel asm. Needs new front bearing kit drum asm and rear bearing and case asm; ordrng 1 WE14X25080 (trap duct asm) and 1 WE49X20697 (DRYER BEARING REPAIR KIT) and 1 WE1M300 (Rear BEARING RETAINER) and 1 WE1M462 (DRUM SLEEVE) and 1 WE00X181L (BEARING) and 1 WE1M461 (O RING)"
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA50R5200AW/US 51
Near Dallas, TX 75211
John
Job Details: 09/14/2023
Installed new suspension rods and drain pump. All checks good.
We serviced a
FRIGIDAIRE DISHWASHER
Model FFID2426TS4A
Near Dallas, TX 75243
Patrick
Job Details: 09/14/2023
"Replaced latch, no joy. Replaced control, no joy. Must replace ui. Removed latch and control. ; ordrng 1 5304518467 (Touchpad)"
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA54R7600AC/US 01
Near Dallas, TX 75252
John
Job Details: 09/14/2023
Customer concernis washer is leaking. Tested unit and found water seeping from inside wall and traveling underneath unit. Advised Customer that a plumber will be needed to resolve issue.
We serviced a
KENMORE REFRIGERATOR
Model 79573153610
Near Richardson, TX 75081
Lane
Job Details: 09/14/2023
Installed new fan cover assembly and performed full function test. No codes were present after repair.
We serviced a
GE WASHER-TOPLOAD
Model GTW490ACJ4WS
Near Dallas, TX 75287
John
Job Details: 09/13/2023
"Installed new belt. During testing unit making loud scraping noise while spinning. Found mode shifter and spring worn and allowing clutch to slip. Must replace mode shifter, clutch, spring, and cam.; ordrng 1 WH03X30517 (Mode shifter) and 1 WH05X24185 (Clutch) and 1 WH01X24434 (spring clutch) and 1 WH03X32097 (Pulley and nut), states that autho needed"
We serviced a
GE RANGE
Model JTS3000SN1SS
Near Forney, TX 75126
Patrick
Job Details: 09/13/2023
Replaced glass pack. Tested unit. All checks good.
We serviced a
MAYTAG RANGE
Model MGR8700DS3
Near Mesquite, TX 75149
Patrick
Job Details: 09/13/2023
"Replaced handle, trim, screws, and manifold. Tested unit. All checks good"
We serviced a
KENMORE COOKTOP
Model ="79043499402"
Near Dallas, TX 75243
John
Job Details: 09/13/2023
Customer concern is LR element not working. Found element fails continuity check. Must replace LR element.; ordrng 1 316442303 (LR burner)
We serviced a
LG WASHER-TOPLOAD
Model WT5001CW
Near Dallas, TX 75243
John
Job Details: 09/13/2023
"Customer cocnern is washer leaking. Found evidence of severe rodent infestation underneath unit. Found tub to drain hose and external, drain hose have multiple holes chewed in them. Advise customer that the warranty company does not cover rodent damage."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WA56H9000AP/A2
Near Mesquite, TX 75149
Patrick
Job Details: 09/13/2023
"Customer concern, unit making loud noise during spin. Confirmed. Found clutch drive collar cracked. Must replace.; ordrng 1 DC97-15494F (Clutch)"
We serviced a
GE WASHER-TOPLOAD
Model GTW465ASN3WW
Near Mesquite, TX 75181
Patrick
Job Details: 09/13/2023
Replaced transmission and agitator. Tested unit all checks good.
We serviced a
GE WASHER-TOPLOAD
Model GTWN4250D1WS
Near Dallas, TX 75243
John
Job Details: 09/13/2023
"Customer concern is washer will not spin or drain. Unit full of water upon arrival along 2 sheets. Drained unit using drain and spin cycle, good drain. Ran diagnostic cycle, all checks good. Rearanged sheets to even out load, unit spins and drains as designed. Advised Customer that some bulky loads may need to be rearanged in order for unit to spin properly. All checks good."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF45R6100AC/US 03
Near Garland, TX 75040
John
Job Details: 09/13/2023
"Customer concern is washer will not spin, just makes noise. Ran diagnostics and found drain pump chatering back and forth but not spinning. No debris found in catch. Needs new drain pump.; ordrng 1 DC97-20621A (Drain pump)"
We serviced a
GE WASHER-TOPLOAD
Model GTWN4250D1WS
Near Dallas, TX 75243
John
Job Details: 09/13/2023
"Customer concern is washer will not spin or drain. Unit full of water upon arrival along 2 sheets. Drained unit using drain and spin cycle, good drain. Ran diagnostic cycle, all checks good. Rearanged sheets to even out load, unit spins and drains as designed. Advised Customer that some bulky loads may need to be rearanged in order for unit to spin properly. All checks good."
We serviced a
WHIRLPOOL DISHWASHER
Model DU850DWGQ1
Near Mesquite, TX 75150
Patrick
Job Details: 09/13/2023
"Customer concern, unit not filling. Good fill. Large leak from rear of unit. Hole in tub. Unit being condemned. Auth # 86moui"
We serviced a
GE REFRIGERATOR
Model UNC15NPRBII
Near Plano, TX 75093
Lane
Job Details: 09/13/2023
"Customer stated a abnormal noise was herd then unit just filled up with water. Performed diagnostics found aftermarket condensation pu,mp failed casing issue. Pump is separate from machine and not coverd by GE factory warranty. Pump needs to be replaced with a ice machine specific design. Plumbing drain hose also needs to be redone with correct style of hose.; ordrng 1 1901a (Icemaker water pump), states that autho needed"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HFEDBSR/AA
Near Prosper, TX 75078
Chad A.
Job Details: 09/13/2023
Replaced ice maker and valve assembly. Cycled ice maker and water fill checked good.
We serviced a
LG RANGE
Model LREL6325D/00
Near Spanaway, WA 98387
Cejay
Job Details: 09/13/2023
"Customer concern is that range display is not working properly. Found display missing led. Needs new display. Installed new display, verified buttons are operational. All checks good."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ
Near McKinney, TX 75071
Chad A.
Job Details: 09/13/2023
On arrival customer stated unit had been serviced by a different company on Monday.
We serviced a
KENMORE DISHWASHER
Model 66513893K801
Near Dallas, TX 75204
John
Job Details: 09/13/2023
Installed new control board and console. All checks good.
We serviced a
KENMORE WASHER-FRONTLOAD
Model ="79641262610"
Near Plano, TX 75023
Lane
Job Details: 09/13/2023
Customer stated washer produces bad smell. Performed diagnostics found washer needs tub clean cycle ran with cleaning product designed for clothes washers. All other functions checked good at time of service
We serviced a
GE DISHWASHER
Model GSD3300K55WW
Near Spanaway, WA 98387
Cameron M.
Job Details: 09/13/2023
"Customer concern is that dishwasher does not drain fully. Cycle tested unit 10x ,found no mechanical defects at time of arrival. Advised customer to monitor and call if issues persist Advised customer on regular cleaning intervals advised customer on using high quality detergent."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ02
Near McKinney, TX 75072
Chad A.
Job Details: 09/13/2023
Customer stated upper ice maker not functioning. On arrival found ice maker jammed due to overfill condition. Water leaking into ice container. Need ice maker and water valve to repair. ; ordrng 1 W11495416 (Valve) and 1 W11658802 (Icemaker)
We serviced a
KENMORE WASHER-TOPLOAD
Model ="11026712690"
Near Tacoma, WA 98444
Cameron M.
Job Details: 09/13/2023
"Customer concern is that washer does not drain and spin. Cycle tested unit. Verified customer concern. Found broken lid switch, causing unit to not drain and spin. Needs new lid switch. Installed new switch cycle tested unit. All checks good. Advised customer on regular cleaning intervals. Advised customer on using high quality detergent ; used 1 WP3949238 (SWITCH-LID) from stock"
We serviced a
WHIRLPOOL WASHER-FRONTLOAD
Model WFW9151YW00
Near Lakewood, WA 98499
Cameron M.
Job Details: 09/13/2023
"Customer concern is that washer does not complete cycle. Preformed visual inspection of unit, failed control lock broken and pressed inside of console, causing unit to intermittently lock and unlock controls. Cycle tested unit empty, found minor oversuds conditions present. Cycle tested unit with customer provided load of mixed laundry, unit produces f3e2 error. Test ohmes reading of temp sensor, good 9.9. Tested continuity of harness, failed no continuity of harness between sensor and main board. Needs new main control and harness ui and console advised customer parts show NLA, AHS TO SUPPLY. REQUIRES AUTH ; ordrng 1 W10370314 (CONSOLE) and 1 WPW10323099 (HARNS-WIRE) and 1 WPW10491312 (CNTRL-ELEC), states that autho needed"
We serviced a
SPEED QUEEN WASHER-TOPLOAD
Model AWN632SP116TW01
Near Gig Harbor, WA 98332
Cameron M.
Job Details: 09/13/2023
"Customer concern is that washer leaks unknown volume of water from rear of unit. Found minor collection of water at rear of unit on floor. Found water pooling in utilities cavity. Pulled unit forward, inspected drain hose and stand pipe. Found minor evidence of overflow in past no current or active leaks at utilities. Inspected inside unit for evidence of leak from inlets and wash components,none. Cycle tested unit 10x on various wash settings to include deep fill. No defect found. Advised customer to monitor and record if issues persist. Also Advised customer not to modify current habits for best chances of detecting leak if returns. Collected 129+tax"
We serviced a
LG WASHER-FRONTLOAD
Model WM3670HWA
Near Denton, TX 76208
Chad A.
Job Details: 09/13/2023
Customer stated washer will not complete cycle. During testing found washer not cycling due to cold water supply. Checked good water pressure from wall to valve but not functioning. Replaced water valve and tested good. No other failures detected. ; used 1 5220FR2075L (INLET VALVE-COLD) from stock
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA51A5505AV/US
Near Puyallup, WA 98375
Cameron M.
Job Details: 09/13/2023
"Customer concern is that washer does not spin out clothes fully. Retrieved errors via service mode found PCx2 (clutch position) ubx3 (unbalanced load) cycle tested unit 12x unit triggers pc error during beginning stages of spin cycle. Inspected drive system components per manufacturer bulletin, found no foreign debris causing shift malfunction. Found failing shifter, causing unit to not spin out clothes. Needs new shifter. Advised customer parts show out of stock may take time to receive parts ; ordrng 1 DC31-00203A (MOTOR DC-CLUTCH)"
We serviced a
LG WASHER-TOPLOAD
Model WT7300CV
Near Enumclaw, WA 98022
Cejay
Job Details: 09/13/2023
"Customer concern is that the washer is going out of balance with small loads and keeps repeating cycle but works fine with regular loads and display had shown inlet error. Found water supply lines reversed and drain line inserted too far into stand pipe,corrected supply lines and drain hose, Cycle tested washer with a load twice, once hot fill and one cold with deep fill to verify water fill and level operation, no issues. Advised customer small loads such as single rugs will cause out of balance symptoms. Also Advised drain line inserted too far into wall can cause a siphon drain causing water level error, not mechanical or component failures at time of service."
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW5000DW3
Near Buckley, WA 98321
Cejay
Job Details: 09/13/2023
"Installed previously ordered washplate and hub, preformed calibration cycle, cycle tested washer with a load. All checks good."
We serviced a
LG DRYER-ELECTRIC
Model DLEX7800WE
Near Bonney Lake, WA 98391
Cejay
Job Details: 09/13/2023
"Customer concern is that dryer is leaving clothes damp on sensor cycles and cycle times are getting shorter and is taking multiple cycles to dry. Preformed airflow test failed (yellow). Preformed temperature checks found dryer unable to maintain temperatures, temperatures slowly decrease after several cycles of the element from 170?F to 130?F. Needs new thermostat and thermistor. Installed new thermostat and thermistor, preformed 2nd temperature checks are now between 200? F and 160?F. Cleaned and calibrated moisture sensors. All checks good. ; used 1 6931EL3002M (THERMOSTAT), and 1 AGM30045804 (THERMISTOR) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW8500DC5
Near Bonney Lake, WA 98391
Cejay
Job Details: 09/13/2023
"Installed previously ordered washplate, cycle tested washer to verify repair, all checks good."
We serviced a
KENMORE REFRIGERATOR
Model ="25360721008"
Near Dallas, TX 75234
Lane
Job Details: 09/13/2023
Wrong appliance listed on service ticket.
We serviced a
MAYTAG WASHER-FRONTLOAD
Model MHW5630HW3
Near Dallas, TX 75220
Lane
Job Details: 09/13/2023
Removed dryer and serviced washer drain pump. Found foreign objects in catch. Advised customer items found are small enough to slip between spin basket and wash tub. Customer stated delicate bag has been used. Performed function test after repair. All functions checked good at time of service.
We serviced a
WHIRLPOOL WASHER-FRONTLOAD
Model WFW85HEFW1
Near Plano, TX 75025
John
Job Details: 09/13/2023
Customer concern is washer sometimes stops mid cycle and all light turn off untill power is cycled at breaker. Ran full diagnostic cycle. Found fault code for UI/Control drop out. Recommend replacing UI console and control board.; ordrng 1 W10903218 (Control panel) and 1 W11201290 (Appliance control board)
We serviced a
SAMSUNG REFRIGERATOR
Model RF261BEAESR/AA. 06
Near Carrollton, TX 75010
Lane
Job Details: 09/13/2023
Customer stated freezer ice maker is not working properly. Performed diagnostics found thermistor hanging off ice maker. Ice being produced is to large showing signs of failure to release causing overfill condition. Ice maker and fill valve need replacing. All other functions checked good at time of service. ; ordrng 1 DA97-07603B (Ice maker) and 1 Needsresearch (Fill valve ice maker)
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED7300DW1
Near Garland, TX 75040
Patrick
Job Details: 09/13/2023
"Customer concern, unit will not stay. Confirmed found blown thermal fuse. Customer to replace."
We serviced a
OTHER COOKTOP
Model NOTAVAILABLE
Near Garland, TX 75043
Patrick
Job Details: 09/13/2023
"Customer concern, rear burners do not light, unit is smoking the pots. Found rear burner orifaces clogged. Cleared. Unit in good operating condition. ; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)"
We serviced a
MAYTAG WASHER-FRONTLOAD
Model MHW5630HC2
Near Tacoma, WA 98404
Branden W.
Job Details: 09/13/2023
Customer concern is that washer does not spin. Clothes come out wet. Customer was inadvertently choosing no spin option causing washer to skip spin cycle. Advised customer on cycle option selections.
We serviced a
SAMSUNG RANGE
Model NE63A6511SS/AA
Near Puyallup, WA 98374
Branden W.
Job Details: 09/13/2023
Customer concern is that both front surface burners are always high heat. Needs new infinite switches for front burners. Next appointment 9/20 1-5; ordrng 1 DG44-01006C (REGULATOR ENERGY F/R) and 1 DG44-01006D (REGULATOR ENERGY F/l)
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8070SR/AA. 04
Near Carrollton, TX 75010
Lane
Job Details: 09/12/2023
Installed ice maker function function checked good at time of service. service repair kit and performed function test. Advised customer to allow 24hr for ice production to return to normal operation. All functions checked good at time of service.
We serviced a
GE DISHWASHER
Model PDT715SYN8FS
Near Plano, TX 75075
John
Job Details: 09/12/2023
Installed new control board and drain pump sent by GE. All checks good.
We serviced a
JENN-AIR WALL OVEN
Model JJW8630DDS
Near Rockwall, TX 75087
Patrick
Job Details: 09/12/2023
"Customer concern, unit doa. Confirmed. Unable to gain access to unit due to cabinetry. Access must be provided before work can begin."
We serviced a
GE REFRIGERATOR
Model PVD28BYNCFS
Near Rockwall, TX 75087
Patrick
Job Details: 09/12/2023
Replaced ice maker. No stored codes. All checks good.
We serviced a
KITCHENAID COOKTOP
Model KGCK366VSS01
Near DuPont, WA 98327
Cameron M.
Job Details: 09/12/2023
"Customer concern is that rear right burner does not ignite. Found failed switch harness, causing burner to not get sprk from Ignitor. Also found burner head screws seized require to be drilled out .Needs new switch harness, burner bodies, orifice holders and screws . REQUIRES AUTH ; ordrng 1 WP4456901 (HARNS-WIRE) and 1 WPW10128445 (HOLDER-ORF LF) and 2 WPW10128448 (HOLDER-ORF RF, LR)s and 1 WPW10128450 (HOLDER-ORF CENTER) and 1 WPW10128451 (HOLDER-ORF RR) and 1 WPW10406243 (burnr-head RF LR) and 1 WPW10406797 (burnr-head RR) and 1 WPW10406878 (burnr-head LF) and 1 WPW10406283 (BURNR-HEAD CENTER) and 10 WP3368921 (SCREW-TORX)s"
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WV60M9900AV/A5 02
Near Spanaway, WA 98387
Cejay
Job Details: 09/12/2023
"Customer concern is that washer is not drain water all they way and clothes are still wet keeps repeating rinse cycle. Pulled error codes, LC1,5C,LC1,5C,DC,LC1,DC. Checked drain for clog, found stripped drain pump causing lower washer not to drain. Needs new drain pump. Follow up scheduled for 09/19 1-5pm; schdld next appmnt for 9/19 TUE 1-5"
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWC360AW0
Near DuPont, WA 98327
Cameron M.
Job Details: 09/12/2023
"Customer concern is that washer will run one cycle then loose power and intermittently loose power mid cycle attempted to service mode unit, unit unresponsive. Verified voltage from receptacle, good 120v supply and polarity. Verified voltage supply to main control, good 120v. Found shifter fault, causing unit to not power. Also found break in harness from shifter to main control. Causing intermittent function loss. During visual inspection of drive components. Found failed tub seal, causing leak down center shaft and pulling oil from gearcase resulting in heavy oily residue to leak from gearcase and sling from belt an pully during high speed spin. Needs new gearcase ,belt,pully,harness,shifter, hub and washplate. Advised customer parts of NLA. AHS TO SUPPLY REQUIRES AUTH ; ordrng 1 W10721967 (CAM) and 1 WPW10006355 (ACTUATOR) and 1 WPW10006384 (BELT) and 1 W11454372 (GEARCASE) and 1 W10456648 (HARNESS) and 1 W10528947 (HUB) and 1 WPW10553968 (WASHPLATE)"
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB765FW3
Near Fairview, TX 75069
Chad A.
Job Details: 09/12/2023
"Replaced gearcase,motor rotor,and listed parts. Cycled to test and all functioned properly."
We serviced a
OTHER DRYER-ELECTRIC
Model DE18S6DKA
Near Dallas, TX 75223
John
Job Details: 09/12/2023
Came to install new motor in dryer. Found that motor sent by AHS is not compatible with unit and no parts breakdown is available. Contacted AHS to have unit put into replacement status due to unit being not repairable.Auth# 129JRAI
We serviced a
KENMORE WASHER-TOPLOAD
Model ="11022352510"
Near Cedar Hill, TX 75104
John
Job Details: 09/12/2023
"Installed new inlet valve, shifter, and cam. All checks good."
We serviced a
GE WASHER-TOPLOAD
Model PTW900BPT0RS
Near McKinney, TX 75072
Chad A.
Job Details: 09/12/2023
Customer concern unit will not turn on. Performed diagnostics and found multiple inverter code failures due to improper voltage from control. Motor test passed and cycled properly. Need main control; ordrng 1 WH22X34397 (MAIN CONTROL BOARD W/INSTRUCTIONS)
We serviced a
KITCHENAID DISHWASHER
Model KUDS40CVWH4
Near Dallas, TX 75230
Lane
Job Details: 09/12/2023
Installed new pcb and performed full function test through onboard diagnostics. Dispenser function tested good at time of service.; saved tckt
We serviced a
GE COOKTOP
Model PP9036SJ2SS
Near Lakewood, WA 98499
Cameron M.
Job Details: 09/12/2023
"Installed previously ordered parts, cycle tested unit. All checks good"
We serviced a
WHIRLPOOL LAUNDRY CENTER
Model LTE6234DQ2
Near Tacoma, WA 98444
Cejay
Job Details: 09/12/2023
"Customer concern is dryer has a burning smell and would like verification dryer is safe to operate. Visually inspected element, cycle tested dryer with customer to verify no debris on element. No afterglow when element is shutoff, heater box temperature with thermal device shows temperatures under 200?F. All checks good."
We serviced a
GE DISHWASHER
Model GDT550PYR3F3
Near Edgewood, WA 98372
Cejay
Job Details: 09/12/2023
"Customer concern is that washer is showing no H2O on display. Cycle tested unit multiple times, unit dose fill,small leak from fill funnel, found clogged spray arm. Un able to replicate no H20 error, possible intermittent inlet valve sticking. Needs new inlet valve for No H20 error. Also needs new fill funnel, o-ring and middle spray arm. Follow up scheduled for 09/20 1-5pm; ordrng 1 WD12X28478 (FILL FUNEL) and 1 WD08X23817 (O-RING) and 1 WD15X27703 (WATER VALVE ASM) and 1 WD22X27740 (MID SPRAY ARM ASSEMBLY)"
We serviced a
GE COOKTOP
Model PP9036SJ2SS
Near Lakewood, WA 98499
Cejay
Job Details: 09/12/2023
Tech was assigned as a helper;
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW4800XQ4
Near Garland, TX 75043
Patrick
Job Details: 09/12/2023
"Customer concern, unit making loud noise during spin. F7e7, f2e1. Unit running on arrival with towels. No apparent problem. Found heavily worn dampers. Must replace. Customer ok'd $329.39 estimate.; ordrng 1 W10780048 (Damper set)"
We serviced a
FRIGIDAIRE WALL OVEN
Model FGEW3045KFB
Near Garland, TX 75043
Patrick
Job Details: 09/12/2023
Replaced sensor and eoc. Tested unit. All checks good.
We serviced a
OTHER DRYER-ELECTRIC
Model DE18S6DKA
Near Dallas, TX 75223
John
Job Details: 09/12/2023
Came to install new motor in dryer. Found that motor sent by AHS is not compatible with unit and no parts breakdown is available. Contacted AHS to have unit put into replacement status due to unit being not repairable.Auth# 129JRAI
We serviced a
GE WASHER-TOPLOAD
Model GTW465ASN3WW
Near Mesquite, TX 75150
Patrick
Job Details: 09/12/2023
"Customer concern, unit makes noise during use. Unit disconnected in garage on arrival. Multiple off balance error codes. Ran spin test empty with nufi. All checks good. Unit must be connected to water source to further test. ; saved tckt"
We serviced a
WHIRLPOOL RANGE
Model WFE770H0FZ1
Near Mesquite, TX 75150
Patrick
Job Details: 09/12/2023
Wrong part ordered. Please amend order. ; ordrng 1 W10779716 (Bake element)
We serviced a
GE RANGE
Model JB655YK6FS
Near Garland, TX 75040
Patrick
Job Details: 09/12/2023
Replaced element and sw. Tested unit. All checks good.
We serviced a
KENMORE REFRIGERATOR
Model ="10654586400"
Near Dallas, TX 75205
Lane
Job Details: 09/12/2023
Customer stated freezer and refrigerator are not cooling properly. Performed diagnostics found only lower section of evaporater forming frost. All other functions checked good at time of service. Sealed system deficiency causing issue.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED5300VW0
Near Irving, TX 75063
Lane
Job Details: 09/12/2023
Customer stated dryer won't stop running when door is opened. Performed diagnostics found faulty door switch. Replaced switch and performed multiple function tests. All functions checked good at time of service. ; used 1 WP3406107 (Door switch) from stock
We serviced a
KITCHENAID DISHWASHER
Model KDTE334GPS0
Near Sunnyvale, TX 75182
John
Job Details: 09/12/2023
Installed new dispenser. All checks good.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB765FC3
Near Rockwall, TX 75087
Patrick
Job Details: 09/12/2023
"Cuisine concern, unit will not start cycle. F5e1 lid sw fault. Found cracked door hinge. Must replace lid and lid lock. ; ordrng 1 W10861642 (Lid lock) and 1 W11256781 (Lid assy)"
We serviced a
BOSCH DISHWASHER
Model SHE65P02UC/63
Near Irving, TX 75063
Lane
Job Details: 09/12/2023
"Customer stated hard water deposits are building up inside dishwasher. Performed diagnostics found unit needs to be cleaned with citric acid based cleaning product, .Dishwasher has one code stored for turbidity sensor fault. This code is more than likely caused by buildup . Filter is stuck and possibly will need to be replaced if not freed up by cleaning product."
We serviced a
KENMORE REFRIGERATOR
Model ="79574023412"
Near Irving, TX 75063
Lane
Job Details: 09/12/2023
Customer stated unit doesn't cool properly. Performed diagnostics found sealed system deficiency. Compressor is running but not pumping refrigerant. System may have a freon leak.
We serviced a
GE OTHER
Model JVX5360SJ2SS
Near Rockwall, TX 75087
Patrick
Job Details: 09/12/2023
"Customer concern, rh light bulb burned out. Confirmed. Lh good, good power to rh. Must replace bulb. Need suction cup removal tool also.; ordrng 1 WB25X24863 (Light bulb) and 1 ? (Suction cup bulb removal tool)"
We serviced a
GE WASHER-TOPLOAD
Model WDRR2500K3WW
Near Balch Springs, TX 75180
John
Job Details: 09/12/2023
Customer concern is washer fills when not in use. Confirmed cold water solenoid not fully seating closed. Needs new inlet valve assy.; ordrng 1 WH13X10026 (Triple valve)
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW4816FW2
Near Bonney Lake, WA 98391
Cejay
Job Details: 09/12/2023
"Cus5omer concern is that washer will intermittently have lid lock issues with lock light flashing. Pulled error codes. F1E2, manual activation of lock no issues, motor ohms in range. Possible actuator issues. Installed new actuator and belt, preformed calibration cycle. Advised customer to monitor washer, if issues persists to call and schedule another appointment. ; used 1 W10913953 (ACTUATOR), and 1 WPW10006384 (BELT) from stock"
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED85HEFC1
Near Lakewood, WA 98498
Cameron M.
Job Details: 09/12/2023
Installed previously ordered rollers and door seal. Cycle tested unit. All checks good
We serviced a
GE DISHWASHER
Model GDF650SMJ2ES
Near Tacoma, WA 98466
Cameron M.
Job Details: 09/12/2023
"Installed previously ordered parts, cycle tested unit. All checks good"
We serviced a
LG RANGE
Model LREL6323S/00
Near Puyallup, WA 98375
Cejay
Job Details: 09/12/2023
"Installed previously ordered plate assembly, cycled all burners to verify repair all checks good."
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8070SR/AA
Near Allen, TX 75002
Lane
Job Details: 09/12/2023
"Customer stated auto pitcher stopped filling. Performed diagnostics found water got into sensor causing issue, removed water and told customer sensor will take several hours to dry. I'f system doesn't begin working by end of day door insert will haft to be replaced. All other functions checked good at time of service. ; ordrng 1 DA97-17399B (Inner case assy)"
We serviced a
GE WASHER-TOPLOAD
Model PTW600BSR1WS
Near McKinney, TX 75072
Chad A.
Job Details: 09/12/2023
Replaced water valve and tested good. No other failures detected.
We serviced a
FRIGIDAIRE WASHER-FRONTLOAD
Model FAFS4272LA0
Near Garland, TX 75040
John
Job Details: 09/12/2023
"Customer concern is washer leaking. Ran full diagnostics, no leak from machine. Found stand pipe clogged and overflowing from wall. Advised Customer that a plumber will be necessary to repair leak. Unit functioning as designed."
We serviced a
LG REFRIGERATOR
Model LSC27925ST
Near McKinney, TX 75070
Lane
Job Details: 09/11/2023
Customer stated refrigerator door won't close. Performed diagnostics found door hitting object causing problem. No parts needed.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28N9780SR/AA. 02
Near Wylie, TX 75098
Lane
Job Details: 09/11/2023
Customer stated ice maker continues to freeze over. Performed diagnostics found known ice maker issue. Service update needs to be applied. All other functions checked good at time of service. ; ordrng 1 DA82-02656A (Assy-ice) and 1 DA81-05595A (Sealant)
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2413US2A
Near Tacoma, WA 98404
Cameron M.
Job Details: 09/11/2023
"Customer concern is that dishwasher does not drain. Cycle tested unit. Found unit draining no problem. Found seized wash motor, causing unit to not wash. Verified voltage supply to wash motor, good 120v supply. Needs new wash pump. Customer declined repair at this time. Collected 129 +tax via card payment"
We serviced a
JENN-AIR RANGE
Model JGS8850ADS
Near Tacoma, WA 98402
Cameron M.
Job Details: 09/11/2023
"Customer concern is that oven produces error and shows call technician roughly 20 minutesintocook cycle. Checked unit for stored error codes, none present. Performed visual inspection of unit, found drip mat covering bottom floor of oven cavity. Advised customer mat is ill Advised, per manufacturer mat can produce inadequate temperature and cause unit to produce heat errors due to restriction of air and heat flow. Preformed Cycle test of unit on bake @425, found no mechanical defect during initial function test. Preformed temperature checks without drip mat and allowing unit to run to point experiencing problems, unit triggers f1-1 error. Found main control failure due to sticking oven relay, causing oven to not heat to set temperature. Needs new main control and temp sensor. Advised customer parts show NLA. AHS TO SUPPLY REQUIRES AUTH ; ordrng 1 12001655 (SENSOR) and 1 74007217 (CLOCK, W/HARNESS)"
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA400PJHDWR/AA-01
Near Tacoma, WA 98418
Cameron M.
Job Details: 09/11/2023
"Customer concern is that washer does not balance during spin cycle. Found unit unlevel causing out of balance condition. Also Found failed suspension rods,causing unit to not balance. Also found excess basket play due to loose hub nut. Found center shaft of gearcase bent causing unit to not balance. Needs new suspension rods and gearcase REQUIRES AUTH ; ordrng 4 DC97-16350C (ASSY DAMPER)s and 1 DC97-16984A (ASSY CLUTCH)"
We serviced a
FRIGIDAIRE RANGE
Model FGGF3030PPF
Near Orting, WA 98360
Cejay
Job Details: 09/11/2023
"Installed previously ordered bake ignitor, cycle tested unit to verify repair, all checks good."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Wylie, TX 75098
Lane
Job Details: 09/11/2023
Customer stated refrigerator has had problems starting from original purchas. Compressor and several other components have been replaced. Current issue is higher than normal fresh food temperatures. Preformed diagnostics found damper not functioning and control randomly cycling off cooling system. Main contol with damper and thermistor need replacing. Current temperatures 0 freezer and 46 fresh food. ; ordrng 1 W11645127 (Diffuser) and 1 WPW10384183 (Thermistor) and 1 W11566891 (Control)
We serviced a
SAMSUNG REFRIGERATOR
Model RF28K9380SR/AA 06
Near Frisco, TX 75034
Chad A.
Job Details: 09/11/2023
Replaced auger assembly and ice maker. Cycled ice maker and water fill checked good. Auger operating and fan running. Ready to make ice.
We serviced a
OTHER OTHER
Model SCCP50MA-1SU
Near Garland, TX 75044
Lane
Job Details: 09/11/2023
Customer stated ice machine had a burning smell then stopped producing ice. Performed diagnostics foumd faulty recirculating pump causing issue. Ice machine may need further service after initial repair. Fill and drain systems checked good at time of service. Part may take several business weeks to be available. ; ordrng 1 12-2986-21 (Water pump)
We serviced a
KENMORE DRYER-ELECTRIC
Model ="11062342511"
Near Lakewood, WA 98498
Cameron M.
Job Details: 09/11/2023
"Customer concern is that dryer takes multiple cycles to dry clothes. Preformed airflow test failed (red). Preformed temperature checks( High ) due to poor airflow. Preformed same tests vent off. Airflow, pass(green). Preformed temperature checks vent off (in range) . Strongly advise customer dryer vent needs to be cleaned asap before use resumes to ensure adequate airflow."