"Customer concern is washer produces clicking noise during spin and agitate transitions. Preformed airflow inspection,found stripped hub, causing unit to not balance. Needs new hub. Installed new hub. Cycle tested unit via rinse and spin, found noise customer is concerned of is normal sound produced by shifter. Found no further mechanical defect. Unit operating as designed Advised customer on regular cleaning intervals. Advised customer on proper loading practices. Advised customer on using high quality detergent. ; used 1 W10528947 (HUB) from stock"

"Customer concern is that dishwasher is not cleaning dishes and is leaving orange and yellow stains on dishes, no high loop installed, cycle tested unit to confirm unit operations, confirmed operation of element. Advised customer dishwasher is back flowing into dishwasher due to no high loop installation or airgap. No mechanical or component failures at time of service."

"Prior to arrival, Customer did have shut off valve installed for dishwasher. Installed previously water valve, cycle tested unit it for leaks and to verify repair. All checks good."

"Customer concern is that oven is not heating correctly. Confirmed proper voltage supply, Found open bake element causing oven not to heat properly. Tempeture sensors ohms in range. Needs new bake element. Installed new element, cycle tested unit, all checks good. ; used 1 W10779716 (ELMNT-BAKE) from stock"

"Installed previously ordered wash motor, preformed service cycle for leaks, cycle tested unit to verify repair, all checks good."