We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model MVWB835DC4
Near Puyallup, WA 98374
Branden W.
Job Details:
11/30/2021
"Installed previously ordered lid lock, cycle tested unit all checks ok"
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB765FW3
Near Tacoma, WA 98445
Cameron M.
Job Details:
11/30/2021
"Installed previously ordered user interface, cycle tested unit. All checks good."
We serviced a
KENMORE RANGE
Model 79042529316
Near Puyallup, WA 98374
Cameron M.
Job Details:
11/30/2021
"Installed previously ordered infinite switch, cycle tested unit. All four burners regulate at proper Temps. All checks good"
We serviced a
WHIRLPOOL RANGE
Model RF3020XGN0
Near Mesquite, TX 75149
Jacob P.
Job Details:
11/30/2021
"Customer concern of surface burners not sitting even and handle coming off. Adjusted receptacles so elements sit even and put loctite on oven handle. Test cycled, all checks ok."
We serviced a
KITCHENAID DISHWASHER
Model KUDS30IXSS4
Near Tacoma, WA 98467
Cameron M.
Job Details:
11/30/2021
Installed previously ordered sensor and control board. Cycle tested unit 3x all checks good.
We serviced a
KENMORE DISHWASHER
Model 66513279K113
Near Graham, WA 98338
Branden W.
Job Details:
11/30/2021
"Customer concern is that dishwasher does not wash. Cycle tested on different cycles. Unit washing properly atthis time. Did find filter clogged, cleaned filter. All checks good at this time."
We serviced a
WHIRLPOOL DISHWASHER
Model DU1055XTSS2
Near Garland, TX 75040
Jacob P.
Job Details:
11/29/2021
"Installed previously ordered inlet valve. Test cycled, all checks ok. Left failed part with customer"
We serviced a
SAMSUNG DRYER-GAS
Model DV42H5000GW/A3 03
Near Lakewood, WA 98499
Cameron M.
Job Details:
11/29/2021
"Customer concern is that dryer makes noise during operation. Preformed airflow test pass (yellow). Right rear roller failed, causing noise during operation. Also found seized idler pulley causing noise during operation. Installed new idler and right rear roller. Cleaned and lubed remaining three rollers. Cleaned and Vacuumed inside of unit. Cycle tested unit all checks good; used 1 DC93-00634A (IDLER ASSEMBLY), and 1 DC97-16782A (DRUM ROLLER) from stock"
We serviced a
KENMORE DRYER-ELECTRIC
Model 41781100003
Near Enumclaw, WA 98022
Branden W.
Job Details:
11/29/2021
"Customer concern is that dryer produces CE error intermittently. Performed airflow test with lint filter installed, failed (red) performed airflow test without lint filter, failed (yellow) dryer vent under house is flexible duct not solid. Advised solid ducting should be used under house. Advised to clean lint filter and to keep outside vent cover clear of obstructions. Dryer operating as designed."
We serviced a
LG DISHWASHER
Model LDF7774ST
Near Parkland, WA 98445
Branden W.
Job Details:
11/29/2021
Installed new drain pump and hose. Cycle tested. All checks good.
We serviced a
MAYTAG WASHER-TOPLOAD
Model LAT8714AAE
Near Garland, TX 75040
Jacob P.
Job Details:
11/29/2021
"Installed previously ordered lid switch fuse. Test cycled, all checks ok."
We serviced a
MAYTAG DRYER-ELECTRIC
Model MED5500FW2
Near Allen, TX 75013
Jacob P.
Job Details:
11/29/2021
"Customer concern of cycle end signal not working. Turned signal volume all the way up. Ran air flow test per customer's request, passed. Test cycled, all checks ok."
We serviced a
LG DISHWASHER
Model LDF6810ST/01
Near Frisco, TX 75035
Jacob P.
Job Details:
11/29/2021
"Installed previously ordered door links. Test cycled, all checks ok."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF42H5200AP/A2 11
Near Graham, WA 98338
Branden W.
Job Details:
11/29/2021
Customer concern is that washer does not drain. Found drain pump filter clogged causing unit to not drain. Cleaned filter. Cycle tested. Checks good.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Spanaway, WA 98387
Cameron M.
Job Details:
11/29/2021
"Customer concern is that dishwasher top rack adjusters broke. Found broken adjusters on top rack, causing rack to fall down. Needs new adjusters. Installed new adjusters. Cycle tested unit. All checks good.; used 1 W10712395 (ADJUSTER) from stock"
We serviced a
GE DRYER-ELECTRIC
Model GTD42EASJ2WW
Near Tacoma, WA 98409
Branden W.
Job Details:
11/24/2021
"Installed new timer, knob and upper bearing assembly. Cycle tested. All checks good."
We serviced a
FRIGIDAIRE RANGE
Model FFGF305TSA
Near Farmers Branch, TX 75234
Jacob P.
Job Details:
11/24/2021
"Customer concern of bake not working. Found good voltage to bake igniter but no ignition. Replaced igniter. Test cycled, all checks ok. ; used 1 WB13K21 (OVEN IGNITER-12' LEAD W/NUTS) from stock"
We serviced a
GE RANGE
Model JS750SF3SS
Near Tacoma, WA 98407
Branden W.
Job Details:
11/24/2021
Installed new element. All checks good.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE50R5200W/A3
Near Eatonville, WA 98328
Cameron M.
Job Details:
11/24/2021
"Customer concern is that dryer starts cycle but doesn't heat and makes noise during operation. Preformed airflow test failed (red).found open heating element,causing unit to not heat during operation. Also found seized idler pulley, causing unit to make noise during operation. Needs new idler pulley and main element. Installed new idler pulley and element. Cycle tested unit all checks good. Advised customer dryer vent duct needs to be cleaned asap before use resumes to prevent further issues. Also advised customer dryer vent hose needs to be shortened to allow sufficient airflow. ; used 1 DC97-14486A (ELEMENT ASSEMBLY), and 1 DC93-00634A (IDLER ASSEMBLY) from stock"
We serviced a
LG DRYER-ELECTRIC
Model DLE5977S
Near Dallas, TX 75228
Jacob P.
Job Details:
11/24/2021
"Installed previously ordered motor. Test cycled, all checks ok."
We serviced a
MAYTAG DRYER-ELECTRIC
Model MED9700SQ0
Near Buckley, WA 98321
Cameron M.
Job Details:
11/24/2021
"Installed previously ordered motor , idler pulley and belt. Cleaned and Vacuumed inside of unit, cleaned and lubed rear rollers. Cycle tested unit all checks good."
We serviced a
GE RANGE
Model JBP21BC2WH
Near Forney, TX 75126
Jacob P.
Job Details:
11/24/2021
"Customer concern of broil element fallen down. Found bracket holding broil element loose. Secured broil element bracket. Test cycled, all checks ok."
We serviced a
GE DISHWASHER
Model GDT635HSJ2SS
Near Rowlett, TX 75088
Jacob P.
Job Details:
11/24/2021
"Installed previously ordered ui board. Test cycled, all checks ok."
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US
Near Allen, TX 75013
Jacob P.
Job Details:
11/24/2021
"Installed previously ordered inlet valve. Test cycled, all checks ok."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV48J7770EP/A2 01
Near Graham, WA 98338
Cameron M.
Job Details:
11/24/2021
"Customer concern is dryer is making a loud squealing noise. Air flow test failed (red) found the cause of noise to be a seized rolller front left. Replaced roller also cleaned and lubed other rollers, cycled tested unit all checks good. Advised customer dryer vent duct needs to be cleaned asap before use resumes to prevent further issues. ; used 1 DC97-16782A (DRUM ROLLER) from stock"
We serviced a
GE COOKTOP
Model n/a
Near Graham, WA 98338
Branden W.
Job Details:
11/24/2021
Issue is with downdraft telescopic range hood not cooktop. Different servicer needed.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED5100VQ0
Near Tacoma, WA 98409
Cameron M.
Job Details:
11/23/2021
"Customer concern is that dryer makes clunky noise during operation. Found dryer vent hose disconnected at time of service, also found screws in drum felt liner causing noise during operation. Removed debris from drum felt liner. Also reinstalled dryer vent hose clamp. Also ran airflow test failed (red). Found clogged lint screen causing restriction of airflow. Cycle tested unit, all checks good. Advised customer dryer lint screen mesh needs to be cleaned. ; used 1 MC450 (4' WORM CLAMP) from stock"
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED9200SQ1
Near Irving, TX 75060
Jacob P.
Job Details:
11/23/2021
"Installed previously ordered control board and lint screen. Test cycled, all checks ok."
We serviced a
ELECTROLUX WALL OVEN
Model EW30EW65GS5
Near Plano, TX 75024
Jacob P.
Job Details:
11/23/2021
"Installed previously ordered convection fan. Test cycled, all checks ok."
We serviced a
KITCHENAID DISHWASHER
Model KDPE234GPS0
Near Puyallup, WA 98374
Branden W.
Job Details:
11/23/2021
Installed new tracks and adjusters. All checks ok.
We serviced a
WHIRLPOOL WALL OVEN
Model WOD51EC7HS01
Near Duncanville, TX 75137
Jacob P.
Job Details:
11/23/2021
"Customer concern of incorrect temperatures in unit. Tested temp probe, ohms in range. Cycle tested temps, temps too high. Adjusted temps down 25deg. Test cycled, all checks ok."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAHZ0
Near Dallas, TX 75214
Jacob P.
Job Details:
11/23/2021
"Customer concern of unit not drying. Test cycled heating element, checks ok. Found no rinse aid in unit. Advised customer rinse aid is required for proper wash and drying results. Unit functioning as designed."
We serviced a
WHIRLPOOL COOKTOP
Model n/a
Near Dallas, TX 75229
Jacob P.
Job Details:
11/23/2021
"Customer concern of knobs not fitting. Found old knob sheath still in gas valve. Removed old knob sheath. Installed new knobs. Test cycled, all checks ok."
We serviced a
MAYTAG DRYER-ELECTRIC
Model MED7230HW0
Near Lake Tapps, WA 98391
Branden W.
Job Details:
11/23/2021
"Customer concern is that dryer takes numerous cycles to dry. Performed airflow test, meter did not register any airflow. Vent is completely clogged. Advised to stop using dryer until venting issue is corrected as it is a fire hazard. Found no mechanical problems with dryer."
We serviced a
LG WASHER-FRONTLOAD
Model WM3700HVA 02
Near Sumner, WA 98391
Branden W.
Job Details:
11/23/2021
"Installed new dispenser, drawer and detergent box. Cycle tested numerous times on fill and entire quick wash. No leaks. All checks good."
We serviced a
HOTPOINT WASHER-TOPLOAD
Model HSWP1000M3WW
Near Irving, TX 75060
Jacob P.
Job Details:
11/23/2021
"Installed previously ordered timer. Test cycled, all checks ok."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF530PLYB3
Near Puyallup, WA 98375
Branden W.
Job Details:
11/23/2021
"Installed new mounting bracket, secured to existing holes under counter. Installed new track and stop. Cycle tested. All checks ok."
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model LSR5121HQ0
Near Plano, TX 75024
Jacob P.
Job Details:
11/23/2021
"Installed previously ordered stoppers and bolt. Test cycled, all checks ok."
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED4850HW0
Near Spanaway, WA 98387
Branden W.
Job Details:
11/23/2021
Installed previously ordered timer. Cycle tested. All checks ok.
We serviced a
GE WASHER-TOPLOAD
Model GTW485ASJ4WS
Near Orting, WA 98360
Cameron M.
Job Details:
11/23/2021
"Installed new main control and ui. Found faulty lid switch, Installed new lid switch. Cycle tested unit 3x all checks ok; used 1 WH08X31577 (LID LOCK QUICK RELEA), and 1 WH08X31577 (LID LOCK QUICK RELEA) from stock"
We serviced a
KENMORE WASHER-TOPLOAD
Model 11027872600
Near Puyallup, WA 98371
Branden W.
Job Details:
11/22/2021
Installed new lid switch and agits. Cycle tested. All checks good.
We serviced a
KENMORE WASHER-FRONTLOAD
Model 79641682610
Near Gig Harbor, WA 98335
Cameron M.
Job Details:
11/22/2021
"Installed sears provided door boot, cycle tested unit. All checks good. Advised customer on regular cleaning intervals."
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAHZ0
Near Enumclaw, WA 98022
Branden W.
Job Details:
11/22/2021
Customer concern is that top rack does not go in or out. Found rack end stop off causing wheel to come off track. Reinstalled wheel and end stop. All checks good.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF320PADS3
Near Wylie, TX 75098
Jacob P.
Job Details:
11/22/2021
"Customer concern of unit draining from air gap. Advised customer that unit draining from air gap is plumbing issue, plumber is needed to fix. Unit functioning as designed."
We serviced a
SAMSUNG DISHWASHER
Model DW80N3030US/AA 00
Near Enumclaw, WA 98022
Branden W.
Job Details:
11/22/2021
Customer concern is that dishwasher produces leak error. Found inlet valve leaking causing error. Replaced inlet valve. All checks ok. ; used 1 DD81-02265A (INLET VALVE) from stock
We serviced a
KENMORE WASHER-FRONTLOAD
Model 11045986404
Near Spanaway, WA 98387
Branden W.
Job Details:
11/22/2021
Customer concern is that washer does not drain or spin. Found drain pump clogged causing washer to not drain or spin. Cleaned pump. Cycle tested. Unit draining and spinning properly. Collected 85.00 deductible via card.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB765FW0
Near Frisco, TX 75035
Jacob P.
Job Details:
11/22/2021
Customer concern of unit not filling with enough water. Tested voltage to inlet valve and Found cold water wasnt opening. Installed new inlet valve from truck stock. Tested and all checks ok. ; used 1 W11165546 (Inlet valve) from stock
We serviced a
ELECTROLUX WASHER-FRONTLOAD
Model EIFLS60LT1
Near McKinney, TX 75069
Jacob P.
Job Details:
11/22/2021
"Installed previously ordered control board. Test cycled, all checks ok."
We serviced a
LG DRYER-ELECTRIC
Model DLE0442W
Near Frisco, TX 75035
Jacob P.
Job Details:
11/22/2021
"Customer concern of unit not heating. Found open hi limit causing no heat. Replaced cut off and hi limit. Test cycled, unit now heats. Ran air flow test, failed. Advised customer vent from back of dryer to outside needs to be cleaned. ; used 1 6931EL3003D (THERMOSTAT), and 1 6931EL3001F (THERMOSTAT) from stock"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV42H5200EP/A3 01
Near Tacoma, WA 98409
Cameron M.
Job Details:
11/22/2021
"Customer concern is that dryer does not heat. Preformed airflow test failed (yellow). Found open heating element, causing unit to power and start cycle but not heat. Needs new element. Installed new element. Cycle tested unit, all checks good. Advised customer dryer vent duct needs to be cleaned asap. Also Advised customer dryer vent hose needs to be shortened and straightened to allow sufficient airflow. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
We serviced a
WHIRLPOOL WALL OVEN
Model F96D-4CLX
Near Rowlett, TX 75088
Jacob P.
Job Details:
11/22/2021
"Customer would like oven temperatures checked. Cycle tested upper and lower oven temps, all checks ok."
We serviced a
LG DRYER-ELECTRIC
Model DLEX3875V
Near Coppell, TX 75019
Jacob P.
Job Details:
11/19/2021
"Customer concern of unit making loud noise. Found worn roller causing loud noise. Replaced roller and tested, all checks ok. ; used 1 DC97-16782A (DRUM ROLLER) from stock"
We serviced a
KENMORE DRYER-ELECTRIC
Model 41781122310
Near Tacoma, WA 98409
Cameron M.
Job Details:
11/19/2021
"Installed sears provided door hinge. Cycle tested unit, all checks good."
We serviced a
GE RANGE
Model P2B918SEM3SS
Near Spanaway, WA 98387
Branden W.
Job Details:
11/19/2021
Installed new main control. Cycle tested. All checks ok.
We serviced a
SAMSUNG RANGE
Model NX58H5600SS/AA
Near Garland, TX 75040
Jacob P.
Job Details:
11/19/2021
"Installed previously ordered burner parts and igniter. Test cycled, all checks ok."
We serviced a
MAYTAG DISHWASHER
Model MDB8989SHZ0
Near Tacoma, WA 98444
Cameron M.
Job Details:
11/19/2021
"Customer concern is that dishwasher dispenser broke. Found catch on dispenser broke, causing dispenser to not close. Needs new dispenser. Installed new dispenser, cycle tested unit. All checks good."
We serviced a
GE RANGE
Model JGBS66DEK3BB
Near McKinney, TX 75070
Jacob P.
Job Details:
11/19/2021
Customer concern of unit not heating. Found oven ignitor not igniting. Installed new ignitor. Tested All checks ok ; used 1 WB13K21 (Oven igniter) from stock
We serviced a
WHIRLPOOL WASHER-FRONTLOAD
Model GHW9150PW0
Near Dallas, TX 75230
Jacob P.
Job Details:
11/19/2021
"Installed previously ordered control board. Test cycled, all checks ok."
We serviced a
KITCHENAID DISHWASHER
Model KUDS02SRSS0
Near DuPont, WA 98327
Cameron M.
Job Details:
11/19/2021
"Installed previously ordered dispenser, cycle tested unit. All checks good."
We serviced a
LG WASHER-FRONTLOAD
Model WM3900HWA
Near Spanaway, WA 98387
Branden W.
Job Details:
11/19/2021
"Customer concern is that washer was making banging noises in spin then stopped powering on. Found front right counterweight broke off of tub and broke wires at control board. Needs new control/harness, tub assembly, weight and bolts. Declined to repair at this time."
We serviced a
KITCHENAID COOKTOP
Model KECC568RPB03
Near McKinney, TX 75070
Jacob P.
Job Details:
11/18/2021
"Installed previously ordered glass top. Test cycled, all checks ok."
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW7500GW2
Near Spanaway, WA 98387
Branden W.
Job Details:
11/18/2021
Customer concern is that washer time was off and ran longer than expected. Has been working fine since. Cycle tested in diagnostic cycle. Found no mechanical issues. Leveled washer. Advised to call if issue persists.
We serviced a
FRIGIDAIRE RANGE
Model FGF368GMB
Near Dallas, TX 75235
Jacob P.
Job Details:
11/18/2021
"Came to install previously ordered valves. Found worn burner tube seal causing gas leak. Burner tube seal is not a serviceable part. Called ahs, Ahs to replace unit. New auth code 264JAVI"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE60M9900V/A3
Near Tacoma, WA 98498
Cameron M.
Job Details:
11/18/2021
"Customer concern is that dryer takes multiple cycles to dry clothes on timed dry, unit shuts down prematurely on sensor cycles. Preformed airflow test failed (red). Cleaned and calibrated moisture sensors. Advised customer dryer vent duct needs to be cleaned asap before use resumes to prevent damage to element and other heating components."
We serviced a
KITCHENAID DISHWASHER
Model KDTM354DSS5
Near Lake Tapps, WA 98391
Branden W.
Job Details:
11/18/2021
Installed new pump and control panel. Cycle tested. All checks good
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHB1
Near Tacoma, WA 98408
Cameron M.
Job Details:
11/18/2021
"Installed previously ordered lower spray arm,cycle tested unit 3x. All checks good."
We serviced a
KENMORE DRYER-ELECTRIC
Model 11067402600
Near Puyallup, WA 98373
Cameron M.
Job Details:
11/18/2021
"Installed sears provided timmer, cycle tested unit. All checks good."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF42H5000AWA2 11
Near Tacoma, WA 98406
Cameron M.
Job Details:
11/18/2021
"Installed previously ordered hall sensor and inverter board. Cycle tested unit 3x empty, all checks good. Advised customer on proper cleaning and running regular cleaning cycles.Also advised customer on using high quality detergent for best wash results."
We serviced a
KENMORE DRYER-ELECTRIC
Model 11066962501
Near Allen, TX 75002
Jacob P.
Job Details:
11/18/2021
Customer concern of dryer duct falling out of ceiling. Advised customer that HVAC company is required to reinstall dryer duct. Unit is functioning as designed.
We serviced a
KENMORE WASHER-TOPLOAD
Model 11031652020
Near Puyallup, WA 98374
Cameron M.
Job Details:
11/18/2021
"Installed sears provided user interface, cycle tested unit, all checks good"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW5000DW2
Near Eatonville, WA 98328
Branden W.
Job Details:
11/18/2021
"Installed new washplate, belt and suspension rods. Cycle tested. All checks ok."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF50K7500AV/A2
Near Puyallup, WA 98374
Branden W.
Job Details:
11/18/2021
"Customer concern is that washer does not spin properly, clothes come out wet. Only errors stored are UB (out of balance) test cycled empty and with a load of towels. Unit operating properly. Performed recalibration. Advised to not overload washer with too much weight. Also advised bedding often goes out of balance and should be run only on bedding cycle. No mechanical issues found."
We serviced a
KITCHENAID COOKTOP
Model KGCU467VSS02
Near Carrollton, TX 75010
Jacob P.
Job Details:
11/18/2021
Customer concern of right front burner wasnt igniting. Found debris in burner body. Cleared debris out burner. Tested and all checks ok.
We serviced a
GE DRYER-ELECTRIC
Model GFD55ESSN0WW
Near Sumner, WA 98390
Cameron M.
Job Details:
11/17/2021
"Customer concern is that dryer controls are locked. Found control lock engaged, causing unit to power but not start and run cycle. Showed customer how to disengage control lock. Preformed airflow test failed (red). Cleaned and calibrated moisture sensors. Advised customer dryer vent duct needs to be cleaned asap, to prevent damage to unit."
We serviced a
GE DISHWASHER
Model GDF630PSM0SS
Near Allen, TX 75002
Jacob P.
Job Details:
11/17/2021
"Customer concern of unit not latching. Found unit was not installed properly, causing door not to close. Reinstalled unit. Unit not powering on. Found loose wire nuts in junction box causing no power. Retightened wire nuts. Test cycled and all checks ok."
We serviced a
KENMORE DRYER-ELECTRIC
Model 79681172210
Near Garland, TX 75044
Jacob P.
Job Details:
11/17/2021
"Installed previously ordered control board. Test cycled, all checks ok."
We serviced a
LG DISHWASHER
Model LDF7774ST
Near Gig Harbor, WA 98335
Branden W.
Job Details:
11/17/2021
"Customer concern is that dishwasher produces leak error. Found water under leak sensor causing error. Source of water from overflow tubes. Cycle tested. Unable to get unit to leak. Did find inner door panel lower seal slightly out of place. Unable to correct. If leak persists, inner panel is needed. Customer to call if they want seal replaced."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Lakewood, WA 98498
Cameron M.
Job Details:
11/17/2021
"Customer concern is wheel broke off. Found top top rack adjusters broken, causing rack to fall. Needs new adjuster kit. Installed adjuster kit, cycle tested unit. All checks good. ; used 1 W10712395 (ADJUSTER) from stock"
We serviced a
GE WASHER-TOPLOAD
Model WJRE5500G0WW
Near Fircrest, WA 98466
Branden W.
Job Details:
11/17/2021
"Installed sears supplied outer tub, seal and tub ring. Cycle tested with load of towels. All checks good."
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WFW92HEFW0
Near Dallas, TX 75225
Jacob P.
Job Details:
11/17/2021
"Customer concern of unit producing f1e1 error (corrupt acu error). Customer advised that they removed power from unit for 30 seconds and unit hasn't produced error again. Tested voltage to unit, checks ok. Ran through diagnostics cycle, checks ok. Advised customer unit is functioning as designed at time of service."
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED5300SQ0
Near Tacoma, WA 98444
Cameron M.
Job Details:
11/17/2021
"Customer concern is that dryer shut down in middle of a cycle, and unit will now not start cycle. Found open thermal fuse, and unit to start and run cycle. Needs new thermal fuse. Installed new thermal fuse. Upon cycle testing unit, found units power cord is creating a fire hazard. Caused by broken 240v outlet with loose terminal contacts. Strongly urged customer needs electrician to fix problems to prevent house fire. Also found for customer safety, left unit unplugged. ; used 1 WP3392519 (FUSE-THRML) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WFW92HEFW0
Near Richardson, TX 75082
Jacob P.
Job Details:
11/17/2021
Customer concern of unit leaking. Found over suds in unit causing leak. Advised customer of proper use for high concentrate detergent and running clean cycles. Unit functioning as designed.
We serviced a
SAMSUNG DISHWASHER
Model DW80K5050US/AA 03
Near Irving, TX 75061
Jacob P.
Job Details:
11/17/2021
"Installed previously ordered console. Test cycled, all checks ok."
We serviced a
KENMORE WALL OVEN
Model 79048839901
Near Spanaway, WA 98387
Branden W.
Job Details:
11/16/2021
"Installed new control, temp sensor and cooling fan. Cycle tested at 350. All checks good."
We serviced a
KENMORE WASHER-TOPLOAD
Model 11025132410
Near Tacoma, WA 98406
Cameron M.
Job Details:
11/16/2021
"Installed sears provided transmission, belt, pulley kit. Actuator, hub. Cycle tested unit, all checks good"
We serviced a
MAYTAG DRYER-ELECTRIC
Model HYE3658AYW 15
Near Lakewood, WA 98498
Cameron M.
Job Details:
11/16/2021
"Installed previously ordered thermo kit. Cycle tested unit, all checks good"
We serviced a
LG WASHER-TOPLOAD
Model WT5270CW
Near Richardson, TX 75081
Jacob P.
Job Details:
11/16/2021
"Installed previously ordered inlet valve. Test cycled,all checks ok."
We serviced a
ELECTROLUX DRYER-ELECTRIC
Model EIED55IRR0
Near Tacoma, WA 98443
Branden W.
Job Details:
11/16/2021
Customer concern is that a sock got into blower housing. Sock has been removed. Took dryer apart to clean blower wheel. All checks ok.
We serviced a
FRIGIDAIRE DRYER-ELECTRIC
Model CRER5700AS1
Near Plano, TX 75093
Jacob P.
Job Details:
11/16/2021
Installed previously ordered parts. Tested and all checks ok.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV52J8700EW/A2
Near Heath, TX 75032
Jacob P.
Job Details:
11/16/2021
"Customer concern of unit starting and not drying as well. Found broken idler pulley causing no start. Replaced idler pulley. Test cycled, unit now starts. Ran air flow test, failed. Advised customer that vent from back of dryer to outside needs to be cleaned. Unit functioning as designed. ; used 1 DV52J8700EW/A2 (Idler pulley) from stock"
We serviced a
FRIGIDAIRE RANGE
Model FEFL78CSC
Near Tacoma, WA 98445
Branden W.
Job Details:
11/16/2021
Installed new elememt. Cycle tested. All checks good.
We serviced a
KENMORE DISHWASHER
Model 66513452K900
Near Lakewood, WA 98499
Branden W.
Job Details:
11/16/2021
Customer concern is that dishwasher does not power on. Found open thermal fuse on control board. Replaced fuse. Cycle tested. All checks ok. ; used 1 W10258275 (BI-METAL THERMAL FUSE) from stock
We serviced a
FRIGIDAIRE DISHWASHER
Model FFBD2412SS0A
Near Tacoma, WA 98404
Branden W.
Job Details:
11/16/2021
Customer concern is that dishwasher does not start. Found bad contact at door latch causing no operation. Repaired contacts. Cycle tested. All checks ok.
We serviced a
KENMORE WASHER-FRONTLOAD
Model 79641383410
Near University Place, WA 98467
Branden W.
Job Details:
11/16/2021
Customer concern is that washer does not drain. Found failed drain pump causing unit to not drain. Replaced pump. All checks ok. ; used 1 4681EA2001T (DRAIN PUMP) from stock
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model GEQ8858JQ1
Near Rowlett, TX 75088
Jacob P.
Job Details:
11/16/2021
"Customer concern of unit not heating. Found thermal cut off open causing no heat. Replaced thermal cut off. Test cycled, unit now heats. Ran air flow test, failed. Advised customer that vent from back of dryer to outside needs to be cleaned before using machine again. Unit functioning as designed. ; used 1 279769 (Thermal cut off) from stock"
We serviced a
KENMORE DRYER-ELECTRIC
Model 110.683227
Near Tacoma, WA 98444
Cameron M.
Job Details:
11/15/2021
Customer concern is that dryer takes multiple cycles to dry clothes. Preformed airflow test passed. Preformed temperature checks high heat in range. Found no mechanical issues at this time . Advised customer on proper loading practices. Collected 85.00 deductible via card Payment.
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED4815EW1
Near Tacoma, WA 98409
Branden W.
Job Details:
11/15/2021
"Customer concern is dryer is not heating very well, test wall outlet 240 good, air flow test failed(red) disconnected vent retested air flow passed(green) cycle tested temperatures, in range. No mechanical issues found. Recommend customer get vent cleaned."
We serviced a
SAMSUNG WASHER-FRONTLOAD
Model WF50K7500AV/A2 11
Near Frisco, TX 75034
Jacob P.
Job Details:
11/15/2021
"Installed previously ordered inverter board. Test cycled, all checks ok."
We serviced a
SAMSUNG DISHWASHER
Model DW80K5050US/AA 02
Near Puyallup, WA 98375
Branden W.
Job Details:
11/15/2021
Customer concern is that dishwasher does not power on. Found loose connection at RY205 on main PCB causing no power. Secured connection. Cycle tested. All checks ok.
We serviced a
KITCHENAID DISHWASHER
Model KDTE254ESS2
Near Tacoma, WA 98466
Cameron M.
Job Details:
11/15/2021
"Installed previously ordered main control board. Cycle tested unit. Upon testing found shorted wire in wash motor harness, causing unit to not run Wash cycle. Fixed shorted wire tested unit again. All checks good."