We serviced a
GE RANGE
Model JP326W0V2WW
Near Steilacoom, WA 98388
Cameron M.
Job Details:
09/13/2021
"Customer concern is that range front left and front right burners are not regulating properly, Customer states she can have them on low and still boil water. Cycle tested burners 10x, found no mechanical issues at this time. Unit operating as designed."
We serviced a
MAYTAG WASHER-FRONT LOA
Model MHWE200XW00
Near Rockwall, TX 75032
Jacob P.
Job Details:
09/13/2021
"Customer concern of unit not draining. Found debris in drain pump causing no drain. Removed debris. Test cycled, all checks ok."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV5451AEW/XAA 03
Near Rockwall, TX 75087
Jacob P.
Job Details:
09/13/2021
"Customer concern of unit making loud noise. Found clamp for motor fallen off causing blower wheel to rub on housing. Secured motor with clamp. Test cycled, all checks ok."
We serviced a
SAMSUNG DISHWASHER
Model DW80H9930US/AA
Near Irving, TX 75060
Jacob P.
Job Details:
09/13/2021
"Installed previously ordered control board, nozzle cover, vane, motion assy arms water wall motor. Test cycled, all checks ok."
We serviced a
GE WASHER-TOPLOAD
Model GTW335ASN0WW
Near Eatonville, WA 98328
Branden W.
Job Details:
09/10/2021
Installed previously ordered parts. Cycle tested. All checks good.
We serviced a
FRIGIDAIRE DISHWASHER
Model FGHD2433KF1
Near Garland, TX 75040
Jacob P.
Job Details:
09/10/2021
"Customer concern of unit leaking. Found unit not level causing overflow out from of unit. Leveled machine. Test cycled, all checks ok."
We serviced a
SAMSUNG DISHWASHER
Model DW80M2020US/AA 00
Near Tacoma, WA 98445
Branden W.
Job Details:
09/10/2021
Customer concern is that dishwasher runs pump and Normal light flashing. Found water in leak detector causing error. Found inlet valve leaking. Replaced valve. Cycle tested. All checks good. Left failed part with customer as it caused a leak. ; used 1 DD81-02265A (INLET VALVE) from stock
We serviced a
GE DISHWASHER
Model GDT635HSJ6SS
Near Spanaway, WA 98387
Branden W.
Job Details:
09/10/2021
Customer concern is that dishwasher does not power on and wiring is burnt. Found power plug going to main control burnt and broken off. Needs new harness and main control. Advised control board is back ordered. Declined to repair at this time.
We serviced a
KENMORE DISHWASHER
Model 665.13092N412
Near Tacoma, WA 98444
Cameron M.
Job Details:
09/10/2021
"Installed previously ordered door latch, handle, console. Cycle tested unit 3x. All checks good."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT720PADE2
Near Puyallup, WA 98375
Branden W.
Job Details:
09/10/2021
Installed new sump/pump assembly. Cycle tested. All checks good.
We serviced a
KENMORE DISHWASHER
Model 6651309N413
Near Plano, TX 75074
Jacob P.
Job Details:
09/10/2021
"Customer concern of unit draining from air gap. Advised customer that drain problem is plumbing issue, plumber is needed to correct issue. Test cycled dishwasher, unit functioning as designed."
We serviced a
KENMORE WALL OVEN
Model 79042003605
Near Allen, TX 75002
Jacob P.
Job Details:
09/10/2021
"Installed previously ordered control board, power supply board and relay board. Test cycled, all checks ok."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM7
Near Buckley, WA 98321
Cameron M.
Job Details:
09/10/2021
"Customer concern is that dishwasher is not fully drying dishes especially plastic dishes. Found element functions. Cycle tested unit 10x via service mode. Found jet dry dispenser completely empty. Also found food debris in upper and lower spray arms, causing poor wash and dry results. Cleared bebris from spray arms. Advised customer on proper loading practices. Also advised customer on regular use of jet dry and high quality detergent for proper was and rinse results."
We serviced a
KENMORE DRYER-ELECTRIC
Model 11067086600
Near Graham, WA 98338
Cameron M.
Job Details:
09/10/2021
"Customer concern is that dryer does not heat, takes multiple cycles to dry clothes. Preformed airflow test failed (red). Preformed airflow test again vent off failed (yellow) . Found debris in dryer blower asm cleared out of blower assembly. Cycle tested unit, unit operating as designed. Advised customer to not use dryer unit ducting is cleaned."
We serviced a
KITCHENAID DISHWASHER
Model KDTE234GPS1
Near Garland, TX 75044
Jacob P.
Job Details:
09/09/2021
"Customer concern of handle fallen off dishwasher. Resecured handle to dishwasher. Test cycled, all checks ok."
We serviced a
KENMORE DRYER-ELECTRIC
Model 11087892601
Near Plano, TX 75074
Jacob P.
Job Details:
09/09/2021
"Customer concern of unit making noise and not heating. Found seized idler pulley and open heating element. Replaced idler pulley and heating element. Test cycled, all checks ok. ; used 1 WP8544771 (ELEMENT), and 1 279640 (PULLEY,IDLER) from stock"
We serviced a
FRIGIDAIRE DISHWASHER
Model FGID2474QF4B
Near Puyallup, WA 98374
Branden W.
Job Details:
09/09/2021
Installed ordered parts. Cycle tested x3. All checks good.
We serviced a
KENMORE DRYER-ELECTRIC
Model 796.81782.710
Near Lakewood, WA 98498
Cameron M.
Job Details:
09/09/2021
"Customer concern is that newly purchased dryer stated cycle approximately 15 minutes into cycle, unit ended cycle and displayed check venting. Preformed airflow test failed (red). Cycle tested unit, found no mechanical issues. Unit operating as designed. Advised customer not to use unit, unit ducting has been cleaned."
We serviced a
LG WASHER-FRONT LOA
Model WM2277HW
Near Bonney Lake, WA 98391
Branden W.
Job Details:
09/09/2021
Customer concern is that washer is very loud and walks in spin cycle. Found failed rear bearing causing noise and movement. Customer declined to repair at this time.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV45H7000EP/A3 01
Near Lakewood, WA 98498
Cameron M.
Job Details:
09/09/2021
"Customer concern is that dryer makes noise during operation. Found failed rear roller, causing noise during operation. Needs new rear roller. Installed new roller, cycle tested. All checks good. ; used 1 DC97-16782A (DRUM ROLLER) from stock"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV210AEW/XAA 01
Near Rowlett, TX 75089
Jacob P.
Job Details:
09/09/2021
"Customer concern of unit not heating. Found wire and connector to heating element burnt. Replaced connector and cut off bad wire. Test cycled, all checks ok."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV36J4000EW/A3
Near Tacoma, WA 98444
Cameron M.
Job Details:
09/09/2021
"Installed previously ordered wire harness and main control board. Cycle tested unit 3x, all checks good. Advised customer dryer vent duct needs to be cleaned asap before use resumes."
We serviced a
WHIRLPOOL RANGE
Model WFG231LVS0
Near Spanaway, WA 98387
Cameron M.
Job Details:
09/08/2021
"Customer concern is that oven does not work. Found open ignitor, causing unit to not heat. Needs new ignitor. Installed ignitor, cycle tested unit 3x. All checks good ; used 1 WB13K21 (OVEN IGNITER-12' LEAD W/NUTS) from stock"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT720PADM2
Near Dallas, TX 75228
Jacob P.
Job Details:
09/08/2021
"Came to install wire harness and drain hoses. Found wash pump not moving water. Tested voltage to wash pump, 120v. Needs new wash pump. Customer declined repair."
We serviced a
FRIGIDAIRE DISHWASHER
Model FGID2474QF0A
Near Bonney Lake, WA 98391
Branden W.
Job Details:
09/08/2021
Installed new pressure sensor. Cycle tested. All checks good.
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE54M8750V/A3
Near Tacoma, WA 98407
Cameron M.
Job Details:
09/08/2021
"Customer concern is that dryer makes noise during operation. Found failed rear right roller, causing unit to make noise during operation. Needs new rear roller. Installed new roller. Cycle tested unit 3x, all checks good. ; used 1 DC97-16782A (DRUM ROLLER) from stock"
We serviced a
SAMSUNG WASHER-FRONT LOA
Model WF448AAP/XAA
Near Gig Harbor, WA 98335
Branden W.
Job Details:
09/08/2021
Customer concern is that washer will not spin and drain. Found relay on main board fails to send voltage to drain pump intermittently. Needs new main board. Board is no longer available. Unable to repair. Board needed DC92-00133V
We serviced a
KENMORE WASHER-FRONT LOA
Model 11028132410
Near Tacoma, WA 98445
Cameron M.
Job Details:
09/08/2021
"Customer concern is that washer makes noise during operation won't rinse and spin. Found F7e5 (shifter failure) via service mode. Also found broken shifter slider upon initial inspection causing unit to make noise and not spin. Needs new slider. Installed new slider, cycle tested unit. All checks good. ; used 1 W10734521 (SLIDER) from stock"
We serviced a
WHIRLPOOL RANGE
Model WFG775H0HZ0
Near Puyallup, WA 98375
Branden W.
Job Details:
09/08/2021
Customer concern is that broil does not work and front right burner does not ignite. Cycle tested broil x30 no issues at time of service. Cleaned ignitor on front left burner. All checks ok.
We serviced a
ELECTROLUX DISHWASHER
Model n/a
Near Lakewood, WA 98498
Cameron M.
Job Details:
09/08/2021
"Customer concern is that dishwasher does not drain. found debris in airgap, causing unit to not drain. Cleaned debris from airgap, cycle tested unit 10x. Found no mechanical issues."
We serviced a
SAMSUNG RANGE
Model NX58H565OWS/AA
Near Sachse, TX 75048
Jacob P.
Job Details:
09/08/2021
"Customer concern of unit taking too long to heat. Found weak igniter causing no ignition. Replaced igniter. Test cycled, all checks ok. ; used 1 WB13K21 (OVEN IGNITER-12' LEAD W/NUTS) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW7000DW1
Near Tacoma, WA 98405
Cameron M.
Job Details:
09/07/2021
"Customer concern is that washer produces f5e3 and will not start cycle. Found f5e2 (lid lock failure) via service mode. Needs new lid lock. Installed lid lock,cycle tested unit 3x.all checks good ; used 1 W10810403 (LID LOCK ASSY) from stock"
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWX655DW2
Near Dallas, TX 75223
Pete
Job Details:
09/07/2021
"Installed previously ordered control board, tested cycle all checks ok"
We serviced a
KENMORE WASHER-TOPLOAD
Model 79631433710
Near South Hill, WA 98373
Branden W.
Job Details:
09/07/2021
Customer concern is that washer is not sensing. And runs longer than indicated. Cycled through service cycle. No issues found. Water pressure switch and sensing program working properly. Advised that time displayed is estimated and it may take longer. All checks ok.
We serviced a
FRIGIDAIRE WASHER-FRONT LOA
Model FAFW3801LW4
Near Tacoma, WA 98406
Branden W.
Job Details:
09/07/2021
Customer concern is that washer does not drain and leaks. Found clogged pump causing no drain. Found hair build up on door glass causing leak from door. Cleaned pump filter and door glass. Advised to check pockets and keep door glass clean. Cycle tested x3. All checks ok.
We serviced a
LG WASHER-TOPLOAD
Model WT1101CW
Near Tacoma, WA 98445
Cameron M.
Job Details:
09/07/2021
"Installed previously ordered drain hose, cycle tested unit 3x. All checks good."
We serviced a
GE LAUNDRY CENTER
Model GUD24ESSM1WW
Near Dallas, TX 75209
Pete
Job Details:
09/07/2021
"Installed previously ordered switches and main control board, tested cycle all checks ok"
We serviced a
AMANA DRYER-ELECTRIC
Model NED4600YQ1
Near Carrollton, TX 75006
Pete
Job Details:
09/07/2021
"Performed pm check, all checks ok"
We serviced a
GE WASHER-TOPLOAD
Model HTW240ASK6WS
Near Lewisville, TX 75067
Pete
Job Details:
09/07/2021
"Installed previously ordered lid lock, tested cycle all checks ok."
We serviced a
KENMORE DRYER-ELECTRIC
Model 110.6120201
Near Frisco, TX 75035
Pete
Job Details:
09/07/2021
"Installed previously ordered timer and door switch, tested cycle, all checks ok"
We serviced a
LG WASHER-TOPLOAD
Model WT1201CV
Near McKinney, TX 75071
Pete
Job Details:
09/07/2021
"Installed previously ordered suspension rods and tub ring. Test cycled, all checks ok."
We serviced a
WHIRLPOOL LAUNDRY CENTER
Model LTE6234DQ3
Near Puyallup, WA 98375
Branden W.
Job Details:
09/03/2021
Installed new timer. Cycle tested. All checks good.
We serviced a
KITCHENAID DISHWASHER
Model KDFE104DWH5
Near Orting, WA 98360
Branden W.
Job Details:
09/03/2021
Customer concern is that dishwasher does not drain. Found clogged in airgap causing poor drain. Cleaned airgap. Cycle tested. All checks good.
We serviced a
WHIRLPOOL WASHER-FRONT LOA
Model WTW5320SQ0
Near Dallas, TX 75246
Jacob P.
Job Details:
09/03/2021
"Customer concern of unit continuously filling in rinse cycle. Found drain hose too far down stand pipe causing siphon. Secured drain hose at proper depth. Test cycled, all checks ok."
We serviced a
GE DISHWASHER
Model GDT695SSJ4SS
Near Sachse, TX 75048
Jacob P.
Job Details:
09/03/2021
"Customer concern of unit not draining. Found debris in drain pump causing no drain. Removed debris. Also found supply hose to inlet valve leaking. Tightened hose, no leak. Test cycled, all checks ok."
We serviced a
AMANA WASHER-TOPLOAD
Model n/a
Near Tacoma, WA 98498
Cameron M.
Job Details:
09/03/2021
"Customer concern is that washer goes out of balance and agitator is broken. Upon initial inspection found agitator was dismantled, causing unit to not agitate. Also found washer case improperly installed, causing unit to make noise as though out of balance during spin cycle . Reseated agitator, properly installed washer case . Cycle tested unit 3x with customer provided load of towels, all checks good."
We serviced a
GE DISHWASHER
Model PDT715SYN3FS
Near Plano, TX 75025
Jacob P.
Job Details:
09/03/2021
"Customer concern of unit not cleaning dishes. Customer advised that there is no hot water in her house currently. Found no rinse aid in unit. Advised customer that rinse aid is required for proper wash and dry results. Unable to test unit fully due to no hot water supply. Test cycled all components, checks ok. Advised customer that she will need to call back in once hot water is fixed to diagnose machine further."
We serviced a
LG DISHWASHER
Model LDP6797BD
Near Graham, WA 98338
Branden W.
Job Details:
09/03/2021
Installed new console. Cycle tested. All checks ok. Advised to clean dishwasher.
We serviced a
WHIRLPOOL WASHER-FRONT LOA
Model WFW94HEXW2
Near Frisco, TX 75035
Jacob P.
Job Details:
09/02/2021
"Customer concern of f9 e1 error(long drain). Found debris in pressure hose causing unit to think its full of water. Cleared pressure hose. Test cycled, all checks ok."
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model TEDX640PQ0
Near Frisco, TX 75034
Jacob P.
Job Details:
09/02/2021
"Customer concern of unit not heating and dryer doesn't stop when door opens. Found open heating element causing no heat and bad contacts in door switch causing it to not turn off. Replaced heating element and door switch. Test cycled, all checks ok. ; used 1 279838 (ELEMENT,HEATER), and 1 WP3406107 (SWITCH-DOR) from stock"
We serviced a
KITCHENAID DISHWASHER
Model KDTE104DSS0
Near McKinney, TX 75071
Jacob P.
Job Details:
09/02/2021
Customer concern of unit leaking under sink. Found unit draining out of air gap and leaking down under sink. Advised that plumber is needed to correct leak issue. Unit functioning as designed
We serviced a
AMANA DISHWASHER
Model ADB1600AWS1
Near Tacoma, WA 98418
Cameron M.
Job Details:
09/02/2021
"Installed previously ordered control board and user interface. Cycle tested unit 3x, all checks good."
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA50M7450AW/A4
Near Tacoma, WA 98406
Cameron M.
Job Details:
09/02/2021
"Installed previously ordered lid lock. Cycle tested unit 3x, all checks good."
We serviced a
MAYTAG DRYER-ELECTRIC
Model MEDC300BW0
Near McKinney, TX 75070
Jacob P.
Job Details:
09/02/2021
"Customer concern of unit not turning on. Found open thermal fuse causing no operation. Replaced thermal fuse, unit now powers on. Test cycled temps, 110-220. Found operating thermostat cycling temps too high. Replaced operating thermostat. Test cycled exhaust temps, 110-170. All checks ok. ; used 1 WP3392519 (FUSE-THRML), and 1 WP3387134 (THRMST-FIX) from stock"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV42H5200EW/A3 01
Near McKinney, TX 75070
Jacob P.
Job Details:
09/02/2021
"Customer concern of unit making grinding sound. Found clamp holding motor loose causing blower wheel to rub on housing. Tightened clamp. Test cycled, all checks ok."
We serviced a
FRIGIDAIRE DISHWASHER
Model FGID2476SF0A
Near Frisco, TX 75035
Jacob P.
Job Details:
09/02/2021
"Customer concern of unit not running. Found unit producing i30 error (leak error). Found water in bottom pan causing error. Cleaned out water from pan. Test cycled for 20+ minutes, no signs of leak. Unit functioning as designed at time of service."
We serviced a
KITCHENAID DISHWASHER
Model KUDS35FXSS5
Near Graham, WA 98338
Branden W.
Job Details:
09/02/2021
"Installed new spray arm, support, seal and cap. Cycle tested numerous times. No leaks. Dishwasher does lean forward. Unable to level as rear of dishwasher has non adjustable wheels and front is as high as it can go without hitting countertop. Also found excessive suds in dishwasher. Advised to run clean cycle regularly."
We serviced a
KENMORE WASHER-TOPLOAD
Model 11025132411
Near Puyallup, WA 98373
Cameron M.
Job Details:
09/02/2021
"Installed sears provided control board. Cycle tested unit 3x, all checks good."
We serviced a
WHIRLPOOL DRYER-ELECTRIC
Model WED49STBW1
Near Dallas, TX 75205
Jacob P.
Job Details:
09/02/2021
"Customer concern of unit not heating. Found loose plug causing insufficient power to unit. Found power cord arced in outlet. Seated plug back in outlet, unit now heats. Advised customer that power cord needs to be replaced. Unit functioning as designed."
We serviced a
WHIRLPOOL DISHWASHER
Model DU915PWPQ2
Near Spanaway, WA 98387
Branden W.
Job Details:
09/01/2021
Customer concern is that dishwasher does not operate. Found light wash button shorted causing unit to not operate. Needs new console assembly. Console is back ordered with no eta. Declined to repair at this time.
We serviced a
GE DRYER-ELECTRIC
Model GTX22EASK0WW
Near Carrollton, TX 75007
Pete
Job Details:
09/01/2021
"Customer concern unit making scraping noise, scraping noise is caused by unit being smashed and bent, advised customer that installation issues is not covered by warranty"
We serviced a
GE DISHWASHER
Model GDT665SSN3SS
Near Lewisville, TX 75056
Pete
Job Details:
09/01/2021
"Customer concern the wrong rollers,checked rollers and found the rollers were swapped, put the rollers on the correct side,left roller on left side ,right roller on right side, tested cycle, all checks ok"
We serviced a
WHIRLPOOL WASHER-FRONT LOA
Model WFW9400SU00
Near Tacoma, WA 98443
Cameron M.
Job Details:
09/01/2021
"Customer concern is that washer makes squealing noise during spin cycle. Cycle tested unit with customer provided load of 5 bath towels 10x , was unable to duplicate customer concern at time of service. Unit operating as designed"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE45R6100P/A3
Near Buckley, WA 98321
Cameron M.
Job Details:
09/01/2021
"Customer concern is that dryer makes noise during operation. Found seized idler pulley, causing noise during operation .needs new idler pulley. Installed new idler pulley cycle tested unit, all checks good. ; used 1 DC93-00634A (IDLER ASSEMBLY) from stock"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV431AEP/XAA 01
Near Carrollton, TX 75006
Pete
Job Details:
09/01/2021
"Performed pm check, tested cycle all checks ok"
We serviced a
LG DRYER-ELECTRIC
Model DLE1310W
Near Dallas, TX 75244
Pete
Job Details:
09/01/2021
"Installed previously ordered door strike, tested cycle, all checks"
We serviced a
GE WASHER-TOPLOAD
Model GTW720BSN1WS
Near Rockwall, TX 75032
Pete
Job Details:
08/31/2021
"Customer concern is not draining, tested unit and found the drain pump not coming on,checked all wires and found the molex plug was off. Plugged drain pump in. Tested cycle all checks ok"
We serviced a
LG WASHER-TOPLOAD
Model WT1201CV
Near Dallas, TX 75228
Pete
Job Details:
08/31/2021
"Installed previously ordered hinges, tested cycle all checks ok."
We serviced a
GE WASHER-TOPLOAD
Model GTW335ASNWW
Near Dallas, TX 75231
Pete
Job Details:
08/31/2021
"Customer concern is that washer is walking and found a screw on the floor, checked the unit and found it off balance, leveled the Machine tested cycle, all checks ok, searched the machine for missing screw, did not find, unit functioning as designed."
We serviced a
SAMSUNG WASHER-TOPLOAD
Model WA50M7450AW/A4
Near Irving, TX 75060
Pete
Job Details:
08/31/2021
"Customer concern it is leaving oil stains on clothes. Removed wash plate and checked for oil leaks . Put in spin mode bearing are ok no oil leaks, Informed customer they are using to much soap in washer, also Informed to use cleaning cycle.unit is functioning as designed, all checks ok"
We serviced a
KENMORE WASHER-TOPLOAD
Model 11020372711
Near Spanaway, WA 98387
Cameron M.
Job Details:
08/31/2021
"Customer concern is that washer does not spin clothes out. Found f0e3 via service mode. Cycle tested unit 10x, with customer provided load of towels. Was unable to duplicate customer concern. Advised customer to monitor and call if issue persists."
We serviced a
KENMORE DISHWASHER
Model 665.16579202
Near Farmers Branch, TX 75234
Pete
Job Details:
08/31/2021
"Customer concern unit was not cleaning, tested unit and found all components working as designed, found no rinse aide in unit. added rinse aide, all checks ok"
We serviced a
KENMORE DRYER-ELECTRIC
Model 41784052500
Near Spanaway, WA 98387
Cameron M.
Job Details:
08/31/2021
"Customer concern is that dryer makes noise during operation. Found failed rear drum bearing, causing unit to make noise during operation. Also found burned and corroded wires, fire risk .needs new wire harness, rear bearing, drum support shaft. Advised customer parts show NLA, may take time to receive parts. Advised customer to leave unit unplugged as it's a fire hazard. ; ordrng 1 134394200 (wiring harness) and 1 134394400 (wiring harness) and 1 5303281153 (bearing kit-rear)"
We serviced a
GE DRYER-ELECTRIC
Model GTD65EBSJ3WS
Near DuPont, WA 98327
Cameron M.
Job Details:
08/31/2021
"Customer concern is that dryer duct clean out does not tightly seal. Found duct clean out box driven and loose fitting. Also found securing tab on wall mount half of dry vent hose mount with broken tab , causing unit to vent into laundry room. No mechanical issues with dryer. Unit operating as designed."
We serviced a
KENMORE DRYER-ELECTRIC
Model 110.61202011
Near Frisco, TX 75035
Pete
Job Details:
08/31/2021
"Customer concern the timer not working, tested unit upon testing found door switch broken, timer is not counting down. Needs new timer and door switch. ; ordrng 1 WPW10186032 (Timer) and 1 WP3406107 (Switch)"
We serviced a
GE WASHER-TOPLOAD
Model GTW460ASJ6WW
Near Plano, TX 75075
Pete
Job Details:
08/31/2021
"Installed previously ordered parts tested cycle, all checks"
We serviced a
WHIRLPOOL DISHWASHER
Model DU915PWPS2
Near DuPont, WA 98327
Cameron M.
Job Details:
08/31/2021
"Customer concern is that dishwasher intermittently leaks water. Cycle tested unit 10x. Found Signs of over suds conditions, causing unit to leak. Advised customer on regular cleaning cycle and switching to high quality detergent."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV45H7000EW/A2 02
Near DuPont, WA 98327
Cameron M.
Job Details:
08/31/2021
"Customer concern is that dryer does not heat. Preformed airflow test failed (yellow ). Preformed temperature check, in range. Found dryer vent slightly crushed,causing lack of airflow. Straightened dryer vent hose. Cleaned and calibrated moisture sensors. All checks good. Advised customer dryer vent duct needs to be cleaned asap, before regular usage resumes."
We serviced a
KENMORE WASHER-TOPLOAD
Model 11022242510
Near Tacoma, WA 98409
Cameron M.
Job Details:
08/31/2021
"Customer concern is that washer washer does not agitate. Pulled error F7e5 via service mode. Found failed actuator, causing unit to not agitate. Needs new actuator. Installed actuator, cycle tested unit 10x all checks good. ; used 1 WPW10006355 (ACTUATOR) from stock"
We serviced a
WHIRLPOOL WASHER-TOPLOAD
Model WTW7800XB0
Near Puyallup, WA 98372
Branden W.
Job Details:
08/31/2021
Installed new bearing kit. Cycle tested. All checks good.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM7
Near Tacoma, WA 98408
Branden W.
Job Details:
08/31/2021
"Customer concern is that dishwasher does not wash. Found 120v to wash pump. Pump not operating causing unit to not wash. Needs new wash pump and grommet. AUTH NEEDED. ; ordrng 1 W10879262 (pump motor) and 1 WPW10538166 (grommet), states that autho needed"
We serviced a
SAMSUNG DISHWASHER
Model DW80M9550US/AA
Near Gig Harbor, WA 98335
Branden W.
Job Details:
08/31/2021
Installed new water wall assembly and vane. Also found soda can tab in drain pump causing noise. Cleaned pump. Cycle tested. All checks good.
We serviced a
MAYTAG WASHER-TOPLOAD
Model MVWB725BW0
Near Tacoma, WA 98444
Branden W.
Job Details:
08/31/2021
Customer concern is that washer produces F9 and UL errors. Found F68/F1 (pressure switch failure) stored. Also found basket hub stripped and seized to shaft causing UL error and washer to not spin. Needs new hub and main control board. Unable to further test. Customer replaced pressure hose and RPS sensor. AHS to supply back ordered parts. ; ordrng 1 W10763749 (cntrl-elec) and 1 W10820039 (hub)
We serviced a
GE DRYER-ELECTRIC
Model GFD14ESSN0WW
Near Dallas, TX 75233
Jacob P.
Job Details:
08/30/2021
"Customer concern of dryer making noise. Test cycled, unable to identify noise. Advised customer that glide bearings can be noisier than rollers in dryers. Unit functioning as designed."
We serviced a
HOTPOINT WASHER-TOPLOAD
Model HSWP1000M3WW
Near Fife, WA 98424
Cameron M.
Job Details:
08/30/2021
"Customer concern is that washer makes noise during spin cycle. Found shipping bar anchor broken free of anchor and riding on drive system support, causing unit to make noise during operation. Re Anchored shipping support, cycle tested unit 3x with customer provided load of towels. All checks good."
We serviced a
KENMORE DRYER-ELECTRIC
Model 11064642400
Near Dallas, TX 75214
Jacob P.
Job Details:
08/30/2021
"Customer concern of unit making noise. Customer advised that last time they tested the dryer, it didn't make noise. Test cycled, no noise. Cleaned and lubed rollers, removed coins from bottom of case. Unit functioning as designed."
We serviced a
KENMORE WASHER-TOPLOAD
Model 11022352511
Near Garland, TX 75044
Jacob P.
Job Details:
08/30/2021
"Installed previously ordered suspension rods. Also found worn hub. Replaced hub. Performed calibration, all checks ok. ; used 1 W10528947 (HUB) from stock"
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DVE45N5300V/A3
Near Graham, WA 98338
Cameron M.
Job Details:
08/30/2021
"Customer concern is that dryer does not heat. Preformed airflow test failed (red).Found open heating element, causing unit to not heat. Needs new heating element. Advised customer dryer vent duct needs to be cleaned. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
We serviced a
LG DISHWASHER
Model LDF554SST
Near Tacoma, WA 98443
Branden W.
Job Details:
08/30/2021
Customer concern is that dishwasher does not drain and produces OE error. Found airgap clogged causing no drain. Cleared airgap. Cycle tested. All checks good.
We serviced a
WHIRLPOOL WALL OVEN
Model GBD277PDS7
Near Spanaway, WA 98387
Branden W.
Job Details:
08/30/2021
Installed new cut off. Cycle tested. All checks ok.
We serviced a
GE DISHWASHER
Model GDT665SFN3DS
Near Edgewood, WA 98371
Branden W.
Job Details:
08/30/2021
Customer concern is that dishwasher leaks from airgap. Cleaned hose from airgap to disposal. Cycle tested x3. Unit draining properly. No issues with dishwasher. Advised to make sure disposal is never backed up as this can cause leak from airgap.
We serviced a
KENMORE WASHER-TOPLOAD
Model 11024902200
Near Puyallup, WA 98375
Cameron M.
Job Details:
08/30/2021
"Customer concern is basket would not spin, Customer shook basket freeing basket. Cycle tested unit 3x, found no mechanical issues at this time. Advised customer to monitor and call if issue persists."
We serviced a
MAYTAG DRYER-ELECTRIC
Model MEDC200XW3
Near DuPont, WA 98327
Cameron M.
Job Details:
08/30/2021
"Customer concern is that dryer does not heat and start cycle. Found tripped breaker ,causing unit to not start and run cycle. reset breaker cycle tested unit 3x, all checks good."
We serviced a
GE WASHER-FRONT LOA
Model GFW550SSN2WW
Near Carrollton, TX 75007
Jacob P.
Job Details:
08/30/2021
"Customer concern of unit not locking. Found door lock stuck in locked position causing cycle not to start. Removed door lock and manually unlocked. Reinstalled door lock. Test cycled, all checks ok."
We serviced a
KENMORE WASHER-FRONT LOA
Model 11047081601
Near Richardson, TX 75080
Jacob P.
Job Details:
08/27/2021
"Performed pm check on washer, tested cycle all checks ok."
We serviced a
SAMSUNG WASHER-FRONT LOA
Model WV55M9600AV/A5 02
Near Buckley, WA 98321
Cameron M.
Job Details:
08/27/2021
Customer concern is that washer does advance cycle. Cycle tested unit 3x empty found no mechanical issues. Cycle tested unit with customer provided load of towels. Was unable to duplicate customer concern. Advised customer to monitor and call if issue persists.
We serviced a
WHIRLPOOL RANGE
Model WFE320M0JS0
Near McKinney, TX 75071
Jacob P.
Job Details:
08/27/2021
"Installed previously ordered back burners, tested cycle all checks ok"
We serviced a
LG DISHWASHER
Model LDF5545ST
Near McKinney, TX 75071
Jacob P.
Job Details:
08/27/2021
"Installed previously ordered door latch and control board, tested cycle all checks ok."
We serviced a
SAMSUNG DRYER-ELECTRIC
Model DV42H5200EW/A3
Near Puyallup, WA 98375
Branden W.
Job Details:
08/27/2021
"Customer concern is that dryer takes multiple cycles to dry. Found heating element coil broke and contacted elememt case causing element to short and only produce small amount of heat causing long dry times. Also found seized idler pulley. Replaced element and idler pulley. Vacuumed inside of dryer. Cycle tested. All checks good. ; used 1 DC97-14486A (ELEMENT ASSEMBLY), and 1 DC93-00634A (IDLER ASSEMBLY) from stock"
We serviced a
SAMSUNG DISHWASHER
Model DW80F800UWS/AA 01
Near McKinney, TX 75071
Jacob P.
Job Details:
08/27/2021
"Installed previously ordered door panel and feed tub,tested cycle all checks ok"