Service History 136 - RPS Appliance Repair

We serviced a

WHIRLPOOL WASHER-TOPLOAD

Model WTW8040DW4

Near Buckley, WA 98321

Cameron M.

Job Details: 05/20/2021

Installed previously ordered lid assembly. Cycle tested. All checks good.

We serviced a

KITCHENAID DISHWASHER

Model KDTM354DSS3

Near Plano, TX 75093

Bud L.

Job Details: 05/20/2021

"Customer concern of unit not powering up. Customer tried to uninstall unit, unhooked water supply and put plug in supply hose due to water not turning off. Tried to turn water supply off to dishwasher, supply valve under sink will not close and is leaking. Found power cord to dishwasher torn behind unit causing short and no power to dishwasher. Advised customer that plumber is needed to fix valve under sink and electrician is needed to fix power cord behind unit. Unable to fully test unit due to no power or water."

We serviced a

GE WASHER-TOPLOAD

Model GTW465ASN1WW

Near Lewisville, TX 75067

Bud L.

Job Details: 05/20/2021

Customer concern of unit being noisy and knotting up clothes.Test cycled and advise customer machine is operating as designed. All checks ok.

We serviced a

GE DISHWASHER

Model GLD4400N10BB

Near Buckley, WA 98321

Cameron M.

Job Details: 05/20/2021

Customer concern is that dishwasher does not drain. Found clogged drain hose causing no drain. Cleared hose. Rerouted drain hose to prevent clogs. All checks good.

We serviced a

SAMSUNG DISHWASHER

Model DW80N3030/US AA

Near Orting, WA 98360

Cameron M.

Job Details: 05/20/2021

Installed new inlet valve. Cycle tested. All checks good. Left old part with customer as it caused a leak.

We serviced a

MAYTAG WASHER-TOPLOAD

Model PAVT234AWW

Near Richardson, TX 75080

Bud L.

Job Details: 05/19/2021

"Installed previously ordered rear leveling legs. Test cycled, all checks ok."

We serviced a

SAMSUNG WASHER-FRONT LOA

Model WF330ANW/XAA 01

Near Gig Harbor, WA 98332

Cameron M.

Job Details: 05/19/2021

Installed new door boot and spring. Cycle tested. All checks good. Left failed part with customer as it caused leak.

We serviced a

GE DISHWASHER

Model ZDT870SSF0SS

Near Gig Harbor, WA 98332

Cameron M.

Job Details: 05/19/2021

Customer concern is that dishwasher does not dry. Found failed thermistor in flood switch causing unit to always read 200deg and not turn hearing element on. Replaced flood switch. Cycle tested. Unit heats properly. Cycle tested dry fan. Good ram and airflow. Advised drying agent needs to be used for proper drying results. All checks good. ; used 1 WD21X10519 (SWITCH FLOOD) from stock

We serviced a

WHIRLPOOL DISHWASHER

Model WDT970SAHZ0

Near Gig Harbor, WA 98335

Cameron M.

Job Details: 05/19/2021

Customer concern is that dishwasher middle rack adjusters broke. Found middle rack adjusters broke causing rack to fall. Installed new adjusters cycle tested all checks good. ; used 1 W10712395 (ADJUSTER) from stock

We serviced a

KITCHENAID COOKTOP

Model KGCC566RBL04

Near Gig Harbor, WA 98335

Cameron M.

Job Details: 05/19/2021

Customer concern is that back left burner flame goes out after a few minutes of being on. Unable to duplicate issue at time of service. Cleaned orifice and burner outlets. Adjusted flame slightly higher on low setting. Advised to call if issue returns.

We serviced a

WHIRLPOOL DRYER-ELECTRIC

Model WED5000DW1

Near Rowlett, TX 75089

Bud L.

Job Details: 05/19/2021

"Customer concern of dryer not turning on. Found shorted heating element causing thermal fuse to open. Replaced heating element and thermal fuse. Test cycled, all checks ok. ; used 1 279838 ( ELEMENT,HEATER), and 1 WP3392519 ( FUSE-THRML) from stock"

We serviced a

SAMSUNG WASHER-TOPLOAD

Model WA400PJHDWR/AA 01

Near Rowlett, TX 75088

Bud L.

Job Details: 05/19/2021

Installed previously ordered suspension rods. Test cycled with a load and all checks ok.

We serviced a

KITCHENAID DISHWASHER

Model KUDW02FRSS0

Near Puyallup, WA 98374

Cameron M.

Job Details: 05/18/2021

"Installed new door seal, links and capmmcycle tested x3. All checks good. Returned key to key box after locking door."

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Puyallup, WA 98374

Cameron M.

Job Details: 05/18/2021

Customer concern is that dishwasher does not drain. Found factory plug still installed in disposal causing dishwasher to not be able to drain. Removed plug. Cycle tested. All checks good.

We serviced a

ELECTROLUX DRYER-GAS

Model EFMG627UTT0

Near Plano, TX 75024

Bud L.

Job Details: 05/18/2021

Performed pm check. Test cycled and all checks ok.

We serviced a

GE DISHWASHER

Model PDT715SYN2FS

Near Grand Prairie, TX 75052

Bud L.

Job Details: 05/18/2021

"Customer concern of unit leaking. Found back of tub bent in causing separation between top of tub and back of tub. Called GE service line, they advised customer will need to call in to customer relations with case number.Case number 05852405Customer relations number 1-800-386-1215"

We serviced a

MAYTAG DRYER-ELECTRIC

Model PYE2300AYW11

Near Mesquite, TX 75150

Bud L.

Job Details: 05/18/2021

"Customer concern of drum not turning. Found broken belt causing no drum movement. Replaced belt. Test cycled, all checks ok. ; used 1 341241 ( Belt) from stock"

We serviced a

SAMSUNG WASHER-TOPLOAD

Model WA52M7750AW/A4 02

Near Tacoma, WA 98405

Cameron M.

Job Details: 05/18/2021

Customer concern is that washer does not clean as well as it did. Cycle tested through quick wash. No mechanical issues found. Advised to run clean cycle regularly and to use minimal amount of detergent and additives as using too much will cause dirt to be deposited back into clothing.

We serviced a

LG WASHER-FRONT LOA

Model WM3270CW

Near Dallas, TX 75209

Bud L.

Job Details: 05/17/2021

Performed pm check. Test cycled and all checks ok.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Frisco, TX 75035

Bud L.

Job Details: 05/17/2021

Customer concern of door not shutting. Found unit not installed correctly causing door not to shut. Advised customer repairs not covered due to installation issues.

We serviced a

SAMSUNG RANGE

Model NE59J3420SS/AA 06

Near Tacoma, WA 98444

Cameron M.

Job Details: 05/17/2021

Installed new burner. Cycle tested. All checks good.

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DV42H5000EW/A3 04

Near Lakewood, WA 98499

Cameron M.

Job Details: 05/17/2021

Customer concern is that dryer run but does not heat. Preformed airflow test failed (yellow) .found open heating element causing dryer to not heat. Installed new element cycle tested all checks good ; used 1 DC97-14486A ( ELEMENT ASSEMBLY) from stock

We serviced a

GE COOKTOP

Model PGS950SEF3SS

Near Wylie, TX 75098

Bud L.

Job Details: 05/17/2021

Installed previously ordered control board. Test cycled and all checks ok.

We serviced a

KITCHENAID DISHWASHER

Model KUDS30IXBL9

Near Garland, TX 75043

Bud L.

Job Details: 05/17/2021

Installed previously ordered sump assy and feed tube. Test cycled and all checks ok.

We serviced a

OTHER DISHWASHER

Model SHEM78W56N10

Near Sunnyvale, TX 75182

Bud L.

Job Details: 05/17/2021

Performed pm check. Test cycled and all checks ok.

We serviced a

LG WASHER-TOPLOAD

Model WT7300CW

Near Graham, WA 98338

Cameron M.

Job Details: 05/17/2021

Customer concern is that washer does not power on. Found tripped GFCI causing no power to washer. Reset GFCI. Cycle tested. All checks ok.

We serviced a

WHIRLPOOL WASHER-FRONT LOA

Model WFW75HEFW0

Near Graham, WA 98338

Cameron M.

Job Details: 05/17/2021

Installed new door boot. Cycle tested. All checks good.

We serviced a

KENMORE DRYER-ELECTRIC

Model 11066902690

Near Eatonville, WA 98328

Cameron M.

Job Details: 05/17/2021

"Customer concern is that dryer shuts off randomly. Found door hinges bent down causing poor contact with door switch. If load pushes against door, dryer shuts down. Bent hinges back up. Adjusted door switch. Cycle tested. All checks good."

We serviced a

GE DISHWASHER

Model GDT630PYM5FS

Near Plano, TX 75075

Bud L.

Job Details: 05/14/2021

Customer concern of unit not draining completely. Test cycled machine. Advised customer that residual water left in sum is normal operation. Machine functioning as designed.

We serviced a

MAYTAG DRYER-ELECTRIC

Model ALE643RAC

Near Rowlett, TX 75088

Bud L.

Job Details: 05/14/2021

Installed previously ordered timer and rollers. Test cycled and all checks ok.

We serviced a

WHIRLPOOL DISHWASHER

Model DU1055XTPQ4

Near McKinney, TX 75070

Bud L.

Job Details: 05/13/2021

Installed previously ordered soap dispenser. Test cycled and all checks ok.

We serviced a

WHIRLPOOL COOKTOP

Model GLS3665RS03

Near McKinney, TX 75070

Bud L.

Job Details: 05/13/2021

Installed previously ordered spark modules and igniters. Test cycled and all checks ok.

We serviced a

KITCHENAID COOKTOP

Model KGCD807XSS02

Near Frisco, TX 75034

Bud L.

Job Details: 05/13/2021

Installed previously ordered spark switch. Test cycled and all checks ok.

We serviced a

GE LAUNDRY CENTER

Model GUD27ESSM1WW

Near Dallas, TX 75225

Bud L.

Job Details: 05/13/2021

Installed previously ordered heating element and drum. Test cycled and all checks ok.

We serviced a

SAMSUNG DISHWASHER

Model DW80M2020US

Near Dallas, TX 75234

Bud L.

Job Details: 05/12/2021

Customer stated that home inspector advised that water temperatures in dishwasher were too low. Checked water temperatures at sink 115. Advised customer that proper temperatures were supplied to dishwasher.

We serviced a

GE WASHER-TOPLOAD

Model GTW685BPL1DG

Near Dallas, TX 75211

Bud L.

Job Details: 05/12/2021

Customer concern that unit not filling with enough water and shutting down early. Found that no cold water supplied to unit. Advised customer that plumber is needed to correct water supply issue. Unit functioning as designed.

We serviced a

LG WASHER-FRONT LOA

Model n/a

Near Eatonville, WA 98328

Cameron M.

Job Details: 05/12/2021

Installed new drain pump. Cycle tested. All checks good.

We serviced a

KENMORE DRYER-ELECTRIC

Model 11087562601

Near DuPont, WA 98327

Cameron M.

Job Details: 05/12/2021

"Customer concern is that dryer run but does not heat. Ran airflow test (green) pass, found open thermal cutoff. Also failed door catch. Causing unit to not heat. Installed new thermal cutoff and thermistor as well as new door catch. Cycle tested, all checks good. ; used 1 279973 ( CUTOFF-TML), 1 WP8577274 ( THERMISTOR), and 1 279570 ( CATCH DOOR DRYER) from stock"

We serviced a

WHIRLPOOL WASHER-FRONT LOA

Model WFW5620HW0

Near Dallas, TX 75227

Bud L.

Job Details: 05/12/2021

Installed previously ordered door boot. Test cycled and all checks ok. Left failed part with customer.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT710PAYM5

Near Bonney Lake, WA 98391

Cameron M.

Job Details: 05/12/2021

Installed new heating element and vent gasket. Cycle tested. All checks good.

We serviced a

KENMORE WASHER-FRONT LOA

Model 79641162411

Near Mesquite, TX 75150

Bud L.

Job Details: 05/12/2021

Installed previously ordered control board. Test cycled and all checks.

We serviced a

GE DISHWASHER

Model GSD3200G00BB

Near Wylie, TX 75098

Bud L.

Job Details: 05/12/2021

Installed previously ordered door switches. Test cycled and all checks ok.

We serviced a

GE WASHER-FRONT LOA

Model GFW850SPN0DG

Near Dallas, TX 75219

Bud L.

Job Details: 05/11/2021

Customer concern that unit wouldn't stop running. Found sud lock error stored. Found customer using non HE detergent causing sud error. Advised customer HE detergent needs to be used in this machine. Unit functioning as designed.

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DV45K6500EV/A3 01

Near Dallas, TX 75244

Bud L.

Job Details: 05/11/2021

"Customer concern of unit making loud noise. Found left rear roller worn causing noise. Also found signs of idler pulley seizing. Replaced rear rollers and idler pulley. Test cycled, all checks ok. ; used 2 DC97-16782A ( Drum roller), and 1 DC93-00634A ( Idler pulley) from stock"

We serviced a

WHIRLPOOL WASHER-TOPLOAD

Model WTW7300DW0

Near McKinney, TX 75070

Bud L.

Job Details: 05/11/2021

Installed previously ordered inlet valve and valve harness. Left failed part with customer. Test cycled and all checks ok.

We serviced a

LG DRYER-ELECTRIC

Model DLEX3700V

Near Lakewood, WA 98499

Cameron M.

Job Details: 05/11/2021

Customer at home at time of service has no idea what the issue is. Customer confused about service appointment. Stated that 'some people say it doesn't do what it's supposed to do' cycle tested dryer. No mechanical failures found. Did find dryer duct is crushed behind dryer and runs into 3 inch pipe. Appears to just vent into wall. Advised that dryer should vent through 4 inch ducting to the outside for proper operation.

We serviced a

WHIRLPOOL DRYER-ELECTRIC

Model WED92HEFW0

Near Edgewood, WA 98371

Cameron M.

Job Details: 05/11/2021

"Customer concern is that dryer doesn't heat. Found open heating element and melted power connectors to element, causing unit to tumble without heating. Replaced element and terminals. Vacuumed inside of dryer. Cycle tested. All checks good. ; used 1 WP8544771 ( ELEMENT), and 2 279457 ( Wire spade) from stock"

We serviced a

WHIRLPOOL WASHER-FRONT LOA

Model WTW8040DW4

Near Graham, WA 98338

Cameron M.

Job Details: 05/11/2021

Installed new water inlet valve. Cycle tested. All checks good.

We serviced a

WHIRLPOOL DRYER-ELECTRIC

Model WED9270XW2

Near McKinney, TX 75069

Bud L.

Job Details: 05/11/2021

"Customer concern of unit not drying. Ran temperature test and unit heated very slowly. Ran air flow test and meter did not move. Removed vent from back of dryer and ran temperature test, temps range from 120-180. Advised customer that vent is 100% restricted from outside to dryer and needs to be cleaned."

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DV48J7770EP/A2 02

Near Dallas, TX 75229

Bud L.

Job Details: 05/10/2021

Installed previously ordered thermistor. Ran temperature check and it range from 110-190 all checks ok.

We serviced a

LG WASHER-FRONT LOA

Model WM2801HLA

Near Gig Harbor, WA 98332

Cameron M.

Job Details: 05/10/2021

Customer concern is that washer intermittently does not spin water out properly. Cycle tested with a load of towels. No mechanical failures found. Advised about loading techniques for large capacity washer.

We serviced a

WHIRLPOOL DRYER-ELECTRIC

Model WED9400SU0

Near Tacoma, WA 98443

Cameron M.

Job Details: 05/10/2021

"Customer concern is that dryer makes noise during operation. Found seized idler pulley causing noise during operation. installed new idler pulley , cycle tested all checks good. ; used 1 279640 ( PULLEY,IDLER) from stock"

We serviced a

LG DRYER-ELECTRIC

Model DLE5977B

Near Frisco, TX 75034

Bud L.

Job Details: 05/10/2021

"Customer concern of burning smell. Ran air flow and temperature check, air flow test failed and temps range 140-240. Removed vent and ran air flow test and temperature check again, air flow test passed and temps range 120-180. Dryer functioning as designed. Advised customer that vent from back of dryer to outside needs to be cleaned."

We serviced a

LG WASHER-TOPLOAD

Model WT1101CW

Near Wylie, TX 75098

Bud L.

Job Details: 05/10/2021

Installed previously ordered lid.Test cycled and all checks ok.

We serviced a

MAYTAG WASHER-FRONT LOA

Model MHW5100DW0

Near Tacoma, WA 98404

Cameron M.

Job Details: 05/10/2021

Customer concern is that washer does not spin. Has to run extra spin cycle and produces F3 E1 error. Found failed pressure switch causing error. Replaced switch. Cycle tested x3. Advised to use quality HE detergent and only 2 tablespoons. ; used 1 WPW10448876 (SWITCH-WL) from stock

We serviced a

GE WASHER-TOPLOAD

Model GTW685BSL1WS

Near Mesquite, TX 75181

Bud L.

Job Details: 05/10/2021

Installed previously ordered lid. Test cycled and all checks ok.

We serviced a

GE DRYER-ELECTRIC

Model GTDP220EF5WW

Near McKinney, TX 75070

Bud L.

Job Details: 05/07/2021

Installed previously ordered bearing assembly. Test cycled and all checks ok.

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWX700XW2

Near Fircrest, WA 98466

Cameron M.

Job Details: 05/07/2021

"Installed previously ordered gearcase,drive belt, drive pulley, scew,washplate drive hub kit. Cycle tested all checks good"

We serviced a

FISHER PAYKEL DRYER-ELECTRIC

Model DEGX1 US

Near Tacoma, WA 98443

Cameron M.

Job Details: 05/07/2021

"Customer concern is that dryer makes loud noise. Bearing issues. Found main drum bearing worn through and drum riding on bearing shaft. Need to cut out bearing and replace support shaft, drum assembly and bearing. Declined to repair at this time."

We serviced a

GE DISHWASHER

Model GDF610PSJ5SS

Near McKinney, TX 75070

Bud L.

Job Details: 05/07/2021

"Installed previously ordered ui board and door harness. Test cycled, unit doesn't drain. Found plug in new garbage disposal. Punched out plug. Test cycled, all checks ok."

We serviced a

GE DISHWASHER

Model GDF535PSR0SS

Near Dallas, TX 75232

Bud L.

Job Details: 05/07/2021

Customer concern of unit leaking. Found that drain hose was not installed causing unit to drain onto floor. Installed drain hose with clamp. Test cycled and all checks ok. ; used 1 43259 ( HOSE CLAMP 9/16 X 1 1/4) from stock

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DV42H5200EW/A3

Near Richardson, TX 75082

Bud L.

Job Details: 05/06/2021

"Customer concern of unit not heating. Found shorted heating element causing low heat. Replaced heating element. Test cycled, all checks ok. ; used 1 DC97-14486A ( ELEMENT ASSEMBLY) from stock"

We serviced a

SAMSUNG WASHER-FRONT LOA

Model WF50K7500AV/A2 11

Near Tacoma, WA 98445

Cameron M.

Job Details: 05/06/2021

"Installed previously ordered door boot, cycle tested all checks good"

We serviced a

MAYTAG DRYER-ELECTRIC

Model MEDC200XW3

Near DuPont, WA 98327

Cameron M.

Job Details: 05/06/2021

"Customer concern is that dryer takes longer to dry clothes. Preformed airflow test (green) pass. Tested internal temperatures, 165 at vent. Dryer operating as designed. No issues found."

We serviced a

WHIRLPOOL COOKTOP

Model G9CE3065XB00

Near Fox Island, WA 98333

Cameron M.

Job Details: 05/06/2021

"Installed previously ordered element, cycle tested all checks good"

We serviced a

SAMSUNG WASHER-FRONT LOA

Model WF42H5200AP/A2

Near Allen, TX 75002

Bud L.

Job Details: 05/06/2021

"Customer concern of unit not spinning clothes out. Still unable to remove rotor to change hall sensor. No error codes stored. Test cycled with a load, unit unable to balance. Advised customer that unit cannot be fixed due to rear tub being discontinued and refund for previous visit minus diagnostic fee will be mailed out from main office."

We serviced a

GE DISHWASHER

Model GDF530PSM2SS

Near Parkland, WA 98444

Cameron M.

Job Details: 05/06/2021

Customer concern is that dishwasher does not drain. Found drain pump impeller restricted causing no drain. Cleaned pump. Cycle tested pump x30. All checks good.

We serviced a

GE DISHWASHER

Model GSD2000J01BB

Near Puyallup, WA 98375

Cameron M.

Job Details: 05/06/2021

Customer concern is that dishwasher leaked and sounded rough during first use. Found lower rack installed backwards causing door panel deflection is most probable cause of leak. Installed rack properly. Cycle tested numerous times and with detergent. No leaks present at this time. Rack missing one wheel. Advised customer missing parts not covered. Advised to monitor and call if leak returns.

We serviced a

JENN-AIR RANGE

Model JDS9865BDP

Near Dallas, TX 75214

Bud L.

Job Details: 05/05/2021

Installed previously ordered control panel. Test cycled and all checks ok.

We serviced a

WHIRLPOOL RANGE

Model WFE770H0FZ2

Near Dallas, TX 75253

Bud L.

Job Details: 05/05/2021

Installed previously ordered control panel. Test cycled and all checks ok.

We serviced a

KENMORE WASHER-FRONT LOA

Model 11045962401

Near Tacoma, WA 98446

Cameron M.

Job Details: 05/05/2021

Customer concern is that washer produces suds error and makes noise. Found broken spinner support on basket causing issues. Needs new rear tub and basket assemblies. Basket assembly is no longer available from manufacturer. Unable to repair washer.

We serviced a

MAYTAG DRYER-ELECTRIC

Model MEDB835DW4

Near Bonney Lake, WA 98391

Cameron M.

Job Details: 05/05/2021

Customer concern socks lodged in blower wheel causing it to not run. Removed socks from blower housing. Cycle tested. All checks good. Advised to never run dryer without lint filter installed. Dryer vent removed prior to service.

We serviced a

SAMSUNG RANGE

Model NE58K9430SS/AA

Near Tacoma, WA 98443

Cameron M.

Job Details: 05/05/2021

"Installed previously ordered door plunger, cycle tested numerous times. All checks good."

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DVE55M9600V/A3

Near Tacoma, WA 98443

Cameron M.

Job Details: 05/05/2021

"Installed previously ordered main board, cycle tested all checks good."

We serviced a

SAMSUNG DRYER-ELECTRIC

Model DV45H6300EW/AE

Near McKinney, TX 75070

Bud L.

Job Details: 05/05/2021

Customer concern that drum would not spin when start. Found that idler pulley wheel was broken causing belt to pop off. Replaced idler pulley. Test cycled and all checks ok. ; used 1 DC93-00634A ( Idler pulley) from stock

We serviced a

WHIRLPOOL WASHER-TOPLOAD

Model WTW4850XQ1

Near Richardson, TX 75081

Bud L.

Job Details: 05/05/2021

Installed previously ordered actuator. Test cycled and all checks ok.

We serviced a

GE DISHWASHER

Model GDT605PSM0SS

Near Eatonville, WA 98328

Cameron M.

Job Details: 05/05/2021

Customer concern is that dishwasher does not start a cycle. Found door latch not engaging preventing unit from starting. Repositioned door latch. Cycle tested. All checks good.

We serviced a

KENMORE WASHER-FRONT LOA

Model 79640272900

Near Rowlett, TX 75089

Bud L.

Job Details: 05/04/2021

Performed pm check. Test cycled and all checks ok.

We serviced a

WHIRLPOOL OVEN/STOVE

Model WOS51EC0AW02

Near Allen, TX 75002

Bud L.

Job Details: 05/04/2021

Installed previously ordered thermal fuse and blower. Test cycled and all checks ok.

We serviced a

WHIRLPOOL WASHER-TOPLOAD

Model WTW8040DW4

Near Fife, WA 98424

Cameron M.

Job Details: 05/04/2021

Installed new lid. Cycle tested. All checks good.

We serviced a

AMANA DRYER-ELECTRIC

Model NED4705EW0

Near Lakewood, WA 98499

Cameron M.

Job Details: 05/04/2021

Customer concern is that dryer gets way too hot. And Temps do not change with selector. Found failed operating thermostat causing unit to overheat. Replaced thermostat. Cycle tested. All Temps in range. ; used 1 WP3387134 ( THRMST-FIX) from stock

We serviced a

MAYTAG DRYER-ELECTRIC

Model MEDB855DC4

Near McKinney, TX 75070

Bud L.

Job Details: 05/04/2021

Customer concern of squeaking sound. Found that the idler pulley was completely seized. Replaced idler pulley. Test cycled and all checks ok. ; used 1 279640 ( Idler pulley) from stock

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWB835DW3

Near Tacoma, WA 98446

Cameron M.

Job Details: 05/04/2021

Customer concern is that washer smells after running weekly cleaning cycles. Cycle tested washer 3x found no mechanical issues. Advised customer on regular cleaning cycles to prevent smells.

We serviced a

MAYTAG LAUNDRY CENTER

Model LSE7804AC

Near Rowlett, TX 75089

Bud L.

Job Details: 05/04/2021

Customer concern of leak. Found drain hose not secured properly causing machine to drain onto floor. Secured drain hose. Test cycled and all checks ok.

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWB835DW4

Near Puyallup, WA 98374

Cameron M.

Job Details: 05/03/2021

Customer concern is that intermittently washer does not respond. Is stuck in cycle. And does not rinse or spin. Found failed lid switch sensing door is closed causing unit to not respond. Also found drain hose never comes above high water level creating Siphon condition and unit to not rinse or spin. Replaced lid latch. Advised that drain hose need to be higher than tub.; used 1 W10810403 (LID LOCK ASSY) from stock

We serviced a

WHIRLPOOL DISHWASHER

Model WDT970SAHZ0

Near Puyallup, WA 98371

Cameron M.

Job Details: 05/03/2021

Installed new rails. All checks good.

We serviced a

MAYTAG RANGE

Model MGRH752CDS

Near Garland, TX 75043

Bud L.

Job Details: 05/03/2021

Customer concern that the oven not working. Found shorted igniter. Replaced igniter. Test cycled and all checks ok. ; used 1 WB13K21 ( OVEN IGNITER-12' LEAD W/NUTS) from stock

We serviced a

GE DISHWASHER

Model GDF620HMJ2ES

Near Spanaway, WA 98387

Cameron M.

Job Details: 05/03/2021

"Installed previously ordered ui, main board, flood switch. Cycle tested all checks good."

We serviced a

GE RANGE

Model JB256RMSS

Near Dallas, TX 75238

Bud L.

Job Details: 05/03/2021

Unit functioning upon arrival.

We serviced a

KENMORE WASHER-FRONT LOA

Model 11021202010

Near Dallas, TX 75225

Jacob P.

Job Details: 04/30/2021

"Customer concern of lid unlocked at end of cycle, never completed. Test cycled lid lock in service mode, checks ok. Ran through drain and spin cycle, completed cycle. Unit functioning as designed."

We serviced a

GE WASHER-FRONT LOA

Model PTWN8050M0WW

Near Murphy, TX 75094

Jacob P.

Job Details: 04/30/2021

"Installed previously ordered wash plate and cap, inverter and display board, and hall sensor. Test cycled, all checks ok."

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWB835DW4F3E2 F0E4

Near Spanaway, WA 98387

Cameron M.

Job Details: 04/30/2021

"Customer concern is that washer makes noise during agitation. Found rotor bolt had come loose, causing noise during agitation. Re-secured bolt cycle tested all checks good."

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWX655DW0

Near Puyallup, WA 98375

Cameron M.

Job Details: 04/30/2021

"Customer concern is that washer does not drain fully and has a smell. Cycle tested washer in service mode, found loose washplate, reseated washplate. Cycle tested all checks good."

We serviced a

GE DRYER-ELECTRIC

Model DBVH512EF0WW

Near Tacoma, WA 98445

Cameron M.

Job Details: 04/30/2021

"Installed new main control. Secured internal dryer duct. Vacuumed inside of dryer. Cleaned moisture sensors. Cycle tested all temperatures. Extra low 123, low 138, medium 162 and high 188. All checks good."

We serviced a

MAYTAG WASHER-FRONT LOA

Model MVWB835DW2

Near Murphy, TX 75094

Jacob P.

Job Details: 04/30/2021

"Installed previously ordered inlet valve. Test cycled, all checks ok."

We serviced a

KITCHENAID DISHWASHER

Model KUDW03CTBL0

Near Plano, TX 75093

Jacob P.

Job Details: 04/30/2021

"Installed previously ordered inlet valve. Test cycled, all checks ok. Left failed part with customer."

We serviced a

SAMSUNG RANGE

Model NE59J7850WG/AA

Near Spanaway, WA 98387

Cameron M.

Job Details: 04/29/2021

"Installed previously ordered lower convection ,fan broil element,bake element, cycle tested all checks good"

We serviced a

SAMSUNG WASHER-FRONT LOA

Model WF45K6500AV/A2

Near Tacoma, WA 98445

Cameron M.

Job Details: 04/29/2021

Customer concern is that washer shakes. Tested empty and with a load of towels. Found no mechanical issues with washer. Did find pedestal causing rocking. Advised that washer is operating as designed.

We serviced a

WHIRLPOOL RANGE

Model WFG520S0FS0

Near Puyallup, WA 98373

Cameron M.

Job Details: 04/29/2021

Installed new control. Cycle tested. All checks good.

We serviced a

MAYTAG WASHER-TOPLOAD

Model MVWB835DW1

Near Lake Tapps, WA 98391

Cameron M.

Job Details: 04/29/2021

"Installed previously ordered inlet valve, cycle tested. All checks good."