Customer stated unit vibrating and noisy. Removed blower housing and cleared debris from blower wheel that was causing out of balance vibration. Cycled to test and found no other failures.

"Installed new gearcase, hose and clamp. All checks good."

Customer stated washer gets out of balance and will not complete cycle. Performed diagnostics found no stored fault codes. Ran function tests through onboard diagnostics. Instructed customer on load size and sorting with proper cycle selection.

Installed new suspension rods and inlet valve assy. All checks good.

Customer stated washer intermittently leaks. Performed diagnostics found excessive suds causing the issue. Advised customer on detergent amount and performing self clean cycle with appropriate products. All functions checked good at time of service.