Customer stated when dishwasher drains water comes out of air gap. Preformed diagnostics foumd no restoration at air gap service cap. Disposal seems to be clogged. Customer needs plumber.

Installed new wash motor. All checks good.

Came to install new wash motor. Found that unit had been running for approximately 1 hour causing motor and heater to be too hot to work around. Advised customer on initial visit to not use DW untill it was repaired. Customer advised that he forgot that I was comming today. Needs to be rescheduled.; O-emld tckt

Installed new motor/fan module. All checks good.

Customer stated oven would not get to set preheat temperature in the 500-550 range. Performed diagnostics found service flash regarding said issue. Control and sensor have already been replaced. Oven did reach 550F during testing. Factory control has been discontinued by manufacturer. Oven working as designed at time of service.