Customer stated dishwasher gave leak code. Kitchen sink backed up at the same time as dishwasher failed. Performed diagnostics ran dishwasher for 20min with no leaks detected. Found drain hose not ran in a high loop. Adjusted drain hose and advised customer if sink continues to back up a plumber needs to address issue.

Replaced faulty lid switch. Performed function test after repair. All functions checked good at time of service. Timer advances through complete cycle.; used 1 Wp3949238 (Lid switch) from stock

Customer stated dishwasher was repaired recently by another company. Preformed diagnostics found wire harness melted down. Control panel is damaged and thermal fuse blown. Heater is causing fuse to blow due to high resistance.; ordrng 1 W10084165 (Control panel) and 1 WPW10082892 (Heater) and 1 W10258275 (Fuse) and 1 WPW10413099 (Harness)

"Replaced agitator, and bolt. Tested unit under load. All checks good."

Customer not home; snapped 1 QuickPics