Near Puyallup, WA 98371
Cameron M.
Job Details:
03/11/2021
DISHWASHER MAYTAG MDBH945AWB
"Customer states that she's having no issue with the dishwasher, no work done."
Near Dallas, TX 75229
Jacob P.
Job Details:
03/11/2021
DISHWASHER MAYTAG MDB8969SDH1
Customer concern of start button not working. Found corrosion on control board and control panel wire. Needs new control board and control panel. Advised customer that both parts are factory order and could take awhile arrive. Customer declined repair at this time.
Near Gig Harbor, WA 98335
Cameron M.
Job Details:
03/11/2021
DISHWASHER WHIRLPOOL NOT AVAILABLE
"Installed new spray arms. Since last visit, upper rack adjuster broke causing rack to fall. Installed new adjuster set. All checks good. ; used 1 W10712395 ( ADJUSTER) from stock"
Near Spanaway, WA 98387
Cameron M.
Job Details:
03/11/2021
DISHWASHER WHIRLPOOL WDF520PADM5
Installed new dispenser. Cycle tested. all checks good
Near Plano, TX 75074
Jacob P.
Job Details:
03/10/2021
DRYER-ELECTRIC WHIRLPOOL WED4985EW0
"Performed pm check on dryer, all checks ok."
Near Farmers Branch, TX 75234
Jacob P.
Job Details:
03/10/2021
DRYER-ELECTRIC SAMSUNG DVE45N5300W/A3
"Customer concern of unit not heating. Found open heating element causing no heat. Replaced heating element. Test cycled, all checks ok. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
Near Dallas, TX 75248
Jacob P.
Job Details:
03/10/2021
COOKTOP KENMORE 79042732400
Customer concern of broken glass top. Found glass top fractured in multiple places. Needs new glass top. ; ordrng 1 318079396 (Glass top)
Near Eatonville, WA 98328
Cameron M.
Job Details:
03/10/2021
WASHER-TOPLOAD MAYTAG MVWX700XW0F1E2
"Customer concern is that washer is getting stuck in load sensing and making a noise. Found motor humming loudly during load sensing have to unplug unit to get it to stop. Found error F1 E2 (failed motor comtrol) stored. Test ohms for the motor Found it in range, tested capacitor and it tested in range. Found problem to be a relay sticking sending constant voltage to motor causing the motor humming and not allowing the unit to advance in cycle. Needs new control board. Follow up visit on 3/16 1-5; ordrng 1 W10393562 (cntrl-elec)"
Near Bonney Lake, WA 98391
Cameron M.
Job Details:
03/10/2021
DRYER-ELECTRIC WHIRLPOOL WED8500DC3
Customer concern is that dryer does not tumble. Found broken belt causing drum to not turn. Needs new belt and idler pulley. Next appointment 3/22 10-2; ordrng 1 W10849499 (belt) and 1 W10837240 (idler pulley)
Near Enumclaw, WA 98022
Cameron M.
Job Details:
03/10/2021
DRYER-ELECTRIC KENMORE 11075962401
Customer concern is that dryer does not start on some cycle. Found failed timer contacts causing dryer to not start. Needs new timer. Next appointment 3/17 10-2; ordrng 1 WP3976576 (timer)
Near Spanaway, WA 98387
Cameron M.
Job Details:
03/10/2021
WASHER-FRONT LOA SAMSUNG n/a
Customer canceled appointment online. No work done.
Near Buckley, WA 98321
Cameron M.
Job Details:
03/10/2021
WASHER-FRONT LOA MAYTAG MVWC465HW2
Customer concern is that washer will not spin only makes clicking sound. Tested ohms reading from control to lid lock Tested in range. Found failed lid lock causing no spin and noise. Needs new lid lock. Follow up visit on 3/17 10-2pm; ordrng 1 W11307244 (Latch)
Near Puyallup, WA 98374
Cameron M.
Job Details:
03/10/2021
WASHER-TOPLOAD WHIRLPOOL WTW5000DW1
"Customer concern is unit not working. advised that washer is currently operating as per design, after following lows advice of trip and reset circuit breaker. Entered service mode on washer, Found no mechanical issues at this time. All checks good."
Near Tacoma, WA 98406
Cameron M.
Job Details:
03/10/2021
DRYER-ELECTRIC GE GTD42EASJ1WW
Customer concern is that the timer on the dryer broke.found cracked timer knob causing dry to not run. Also found timer very difficult to turn. Needs new knob and timer. Follow up 3/24 1-5; ordrng 1 WE01X24552 (knob main asm) and 1 WE04X24550 (timer) and 1 WH01X24378 (knob options asm)
Near Dallas, TX 75205
Jacob P.
Job Details:
03/10/2021
WASHER-TOPLOAD MAYTAG MVWX655DW1
"Customer concern of unit leaving black marks on clothes. Removed wash plate to check for detergent build up, checks ok. Checked hub, no play in basket. Checked transmission for oil, checks ok. Unable to find cause of unit leaving marks on clothes. Advised customer to call back if problem persists."
Near Tacoma, WA 98404
Cameron M.
Job Details:
03/10/2021
DRYER-ELECTRIC SAMSUNG DV45K6500EV/A3 01
Customer concern is that dryer runs constantly unless door is open. Found stuck motor relay causing drum to run. Needs new main pcb. Advised shelf above dryer needs to be removed prior to service. Next appointment 3/22 1-5; ordrng 1 DC92-01896A (Main pcb)
Near Dallas, TX 75253
Jacob P.
Job Details:
03/10/2021
DRYER-ELECTRIC GE GFD45ESSM1WW
"Installed previously ordered heating element. Test cycled, all checks ok."
Near Dallas, TX 75218
Jacob P.
Job Details:
03/10/2021
DRYER-ELECTRIC GE GTD33EASKWW
Home depot has different servicer
Near Dallas, TX 75248
Jacob P.
Job Details:
03/10/2021
WASHER-TOPLOAD WHIRLPOOL WTW8500DW5
"Customer cummerbund of unit making squealing sound while spinning. Test cycled, no sound. Removed rotor, no signs of wear. Checked hub and wash plate, checks ok. Unable to identify cause of noise. Found service bulletin about dry suspension rod cups causing squealing sound. Lubed suspension rod cups. Advised customer to call back if problem persists."
Near Irving, TX 75061
Jacob P.
Job Details:
03/10/2021
RANGE GE JB645RK1SS
"Customer concern of front right and left rear element not working. Tested voltage to both elements, good voltage to both. Needs new surface elements. ; ordrng 1 WB30X24111 (FR surface element) and 1 WB30T10145 (LR Surface element)"
Near Richardson, TX 75081
Jacob P.
Job Details:
03/10/2021
WASHER-FRONT LOA WHIRLPOOL WTW4816FW2
"Customer concern of unit not filling enough on deep fill wash. Found long fill error stored. Test cycled hot and cold valves, both check ok. Checked pressure hose, all clear. Ran through self diagnostic cycle, all checks ok. Advised customer that only part that could cause this issue is pressure sensor. Needs new control board. ; ordrng 1 W11170319 (Control board)"
Near Garland, TX 75040
Jacob P.
Job Details:
03/09/2021
DRYER-ELECTRIC KENMORE 11065132411
"Performed pm check on dryer, all checks ok."
Near Orting, WA 98360
Cameron M.
Job Details:
03/09/2021
RANGE GE PGS960EEL2ES
Installed new ignitors and burner rail. Cycle tested. All checks good.
Near Mesquite, TX 75149
Jacob P.
Job Details:
03/09/2021
DISHWASHER GE 2213222N414
"Performed pm check on dishwasher, all checks ok."
Near Graham, WA 98338
Cameron M.
Job Details:
03/09/2021
DISHWASHER WHIRLPOOL 3631414597
Installed new pump/sump assembly. Cycle tested 3x all checks good. customer did not want failed part that caused the leak left behind.
Near Spanaway, WA 98387
Cameron M.
Job Details:
03/09/2021
RANGE SAMSUNG NE58K9430SS/AA
Installed new right front burner. Cycle tested all checks good.
Near Irving, TX 75061
Jacob P.
Job Details:
03/09/2021
WASHER-TOPLOAD KENMORE 11082683120
"Performed pm check on washer, found stand pipe backing up when unit drains. Advised customer that plumber is needed. Unit functioning as designed."
Near Dallas, TX 75229
Jacob P.
Job Details:
03/09/2021
WASHER-TOPLOAD MAYTAG MVWB865GW0
"Customer concern of unit leaking. Found stand pipe filling up and over flowing when unit drains. Advised customer that plumber is needed. Unit functioning as designed. Left machine slid out, per customer's request."
Near Dallas, TX 75233
Jacob P.
Job Details:
03/09/2021
WASHER-TOPLOAD KENMORE 11020022010
"Performed pm check, all checks ok."
Near Mesquite, TX 75149
Jacob P.
Job Details:
03/09/2021
WASHER-FRONT LOA KENMORE 79641303610
Machine checks ok
Near South Hill, WA 98374
Cameron M.
Job Details:
03/09/2021
WASHER-FRONT LOA LG WM0642HW
Customer concern is that washer shakes and has burning smell. Washer in garage. Not hooked up. Found failed tub bearings causing basket to wobble and contact door boot. Needs rear tub and basket. Advised of high cost of repair. NO CHARGE
Near Tacoma, WA 98406
Cameron M.
Job Details:
03/09/2021
DISHWASHER KITCHENAID KUDC03FVSS3
Customer concern is that dishwasher will not power on.Tested continuity of thermal fuse found it to be open causing no power condition. Replaced thermal fuse and cycle tested all checks good.; used 1 W10258275 ( BI-METAL THERMAL FUSE) from stock
Near University Place, WA 98466
Cameron M.
Job Details:
03/09/2021
RANGE WHIRLPOOL WFE361LVS1
Installed new infinite switch for front right burner. Cycle tested. All checks good.
Near Gig Harbor, WA 98335
Cameron M.
Job Details:
03/09/2021
DRYER-ELECTRIC GE GTD45EASJ2WS
Installed new bulb previous tech ordered. Checks good.
Near Orting, WA 98360
Cameron M.
Job Details:
03/09/2021
DRYER-ELECTRIC SAMSUNG DV330AEW/XAA
Customer concern is that dryer will not tumble. Cycle tested mortor x30. No mechanical issues found at time of service. Advised customer to call if issue returns.Vent not hooked up at time of service.
Near Eatonville, WA 98328
Cameron M.
Job Details:
03/09/2021
WASHER-FRONT LOA KENMORE 41744052400
"Customer concern is that washer does not drain and intermittently makes buzzing noise. Cycle tested 3x , found no mechanical issues at this time. All checks good.Advised customer to call if issue returns."
Near Dallas, TX 75211
Jacob P.
Job Details:
03/09/2021
WASHER-TOPLOAD WHIRLPOOL WTW4816FW2
"Customer concern of unit not washing, just filling and sitting. Test cycled on rinse and spin, unit over filled but did wash. Unit does not drain, found impeller completely seized. Tested voltage to drain pump, 120v. Unable to activate drain pump in service mode. Needs new drain pump and control board. Customer will call in with repair decision."
Near Dallas, TX 75217
Jacob P.
Job Details:
03/09/2021
DRYER-ELECTRIC KENMORE 79681172210
"Performed pm check, air flow test failed. Found vent behind dryer crushed. Advised customer that vent needs to be fixed asap. Machine functioning as designed."
Near Spanaway, WA 98387
Cameron M.
Job Details:
03/09/2021
DRYER-ELECTRIC SAMSUNG DV40J3000EW/A2
Customer concern is that dryer does not heat. Found open heating element causing no heat. Replaced element vacuumed inside of dryer. Cycle tested. Good Temps. All checks good.Vent from dryer to wall off at time of service. Advised wall connection should be cut down and new duct installed. ; used 1 DC97-14486A (ELEMENT ASSEMBLY) from stock
Near Wilmer, TX 75172
Jacob P.
Job Details:
03/09/2021
DRYER-GAS GE GTDP180ED0WW
"Customer concern of dryer not drying clothes. Ran air flow test, failed. Removed vent from back of dryer. Ran air flow test again, passed. Test cycled temps, in range. Advised customer that vent from back of dryer to outside needs to be cleaned asap. Machine functioning as designed."
Near Graham, WA 98338
Cameron M.
Job Details:
03/09/2021
DISHWASHER GE GDT695SMJ5ES
Customer concern is that dishwasher does not drain. Found debris in pump causing no drain. Cleaned drain pump. Cycle tested x3. All checks good.
Near Orting, WA 98360
Cameron M.
Job Details:
03/09/2021
WASHER-FRONT LOA SAMSUNG WF42H5000AW/A2 11
Customer concern is that washer produces 4E error and doesn't spin. Washer located in shed with only cold water supplied from garden hose. Found 4E caused by plugged inlet screen. Cleaned screen. Good water pressure. Unable to verify any spin issues. It's possible washer froze and could not drain causing no spin. Advised shed should be heated to prevent any freezing.
Near Enumclaw, WA 98022
Cameron M.
Job Details:
03/09/2021
RANGE WHIRLPOOL WFE550S0HZ1
"Customer concern is that oven is not heating to set temperatures. Tested temperatures with mechanical thermometer and temperature probe at 350 degrees. Found no mechanical issues at this time. Instructed customer on how to adjust oven temperature, also Advised customer to call back if issue returns."
Near Puyallup, WA 98375
Cameron M.
Job Details:
03/09/2021
DRYER-ELECTRIC SAMSUNG DV42H5000EW/A3 03
Customer concern is that dryer makes thumping sounds. Found right rear drum roller worn causing noise. Replaced drain roller. Cycle tested. All checks good. ; used 1 DC97-16782A (DRUM ROLLER) from stock
Near Buckley, WA 98321
Cameron M.
Job Details:
03/09/2021
WASHER-FRONT LOA WHIRLPOOL WFW8540FW1
"Customer concern is that washer is producing error codes. Customer states after reducing the amount of detergent used washer has been preforming as designed. Cycle tested washer found unit draining slowly causing error code. Cleaned debris from drain pump, cycle tested all checks good."
Near Dallas, TX 75211
Jacob P.
Job Details:
03/09/2021
DRYER-ELECTRIC WHIRLPOOL WED4815EW1
"Customer concern of unit not turning on. Found broken door switch causing no start. Replaced door switch. Test cycled, all checks ok. ; used 1 WP3406107 (SWITCH-DOR) from stock"
Near Irving, TX 75061
Jacob P.
Job Details:
03/09/2021
WASHER-FRONT LOA GE GTW330ASK3WW
"Customer concern of unit not turning on. Tested voltage to unit, no voltage. Ran extension cord from working outlet to machine. Test cycled, all checks ok. Advised customer that electrician is needed to fix power supply. Unit functioning as designed."
Near Graham, WA 98338
Cameron M.
Job Details:
03/04/2021
WASHER-FRONT LOA LG WM3250HWA
Customer concern is that washer makes knocking noise in spin cycle and leaks from door. Cycle tested with a load in quick wash. No abnormal noises heard. Shocks make a little noise but operate as designed. Found basket has small amount of play through tub bearings causing slight noise. Advised of high cost of repair for tub bearing job. Found leak from front door boot and glass seal. Found leak happening when internal air pressure pushes door outward slightly. Cleaned debris from top tub vent mushroom valve. Advised to keep door glass clean.
Near Sumner, WA 98391
Cameron M.
Job Details:
03/04/2021
RANGE GE ZDP48N6DH7SS
Installed previously ordered parts. Cycle tested all checks good.
Near Graham, WA 98338
Cameron M.
Job Details:
03/04/2021
DISHWASHER KITCHENAID KDTM354DSS5
Installed new sump assembly. Cycle tested. All checks good.
Near Tacoma, WA 98445
Cameron M.
Job Details:
03/03/2021
DRYER-ELECTRIC SAMSUNG DVE50R5200W/A3
Installed new door and latch. All checks ok.
Near Tacoma, WA 98404
Cameron M.
Job Details:
03/03/2021
DISHWASHER HOTPOINT HDA3740G02SA
Installed new sump/motor assembly. Cycle tested x5. All checks good.
Near Lakewood, WA 98498
Cameron M.
Job Details:
03/03/2021
DRYER-ELECTRIC SAMSUNG DV317AEG/XAA
Customer concern is dryer not heating. Found open heating element Causing no heat. Also found seized rear roller. Replaced heating element and lubed rear roller. Cycle tested on air fluf and normal Cycle all checks good.Auth # 265004158; used 1 DC97-14486A ( ELEMENT ASSEMBLY) from stock
Near Buckley, WA 98321
Cameron M.
Job Details:
03/03/2021
WASHER-TOPLOAD WHIRLPOOL WTW4816FW2
Installed new main control. Cycle tested. All checks good.
Near Gig Harbor, WA 98335
Cameron M.
Job Details:
03/03/2021
DISHWASHER GE DDT595SSJ2SS
Installed new display board. Cycle tested. All checks good.
Near Gig Harbor, WA 98332
Cameron M.
Job Details:
03/03/2021
WASHER-FRONT LOA KENMORE 11047561602
Customer concern is that washer does not spin well especially with load of towels. Cycle tested washer through service cycle. All mechanical components check good. Tested with load of towels in quick wash. Towels spun at proper RPM. No issues found with washer. Advised to run clean cycle regularly. Advised to call if issues persists.
Near Gig Harbor, WA 98332
Jacob P.
Job Details:
02/25/2021
DISHWASHER SAMSUNG DW80F600UTS/AA 01
"Installed previously ordered door latch. Test cycled, all checks ok."
Near Tacoma, WA 98404
Jacob P.
Job Details:
02/25/2021
RANGE WHIRLPOOL WFE550S0HZ1
"Installed previously ordered hinge kit. Test cycled, all checks ok."
Near Spanaway, WA 98387
Jacob P.
Job Details:
02/25/2021
DRYER-ELECTRIC SAMSUNG n/a
Performed pm check. All checks good.
Near Puyallup, WA 98375
Jacob P.
Job Details:
02/25/2021
DRYER-ELECTRIC GE DBXR463ED1WW
"Installed previously ordered front and rear bearings. Test cycled, all checks ok."
Near Spanaway, WA 98387
Jacob P.
Job Details:
02/25/2021
DISHWASHER SAMSUNG DW80M9960UG/AA
"Installed previously ordered water wall motor. Test cycled, all checks ok."
Near Tacoma, WA 98408
Jacob P.
Job Details:
02/25/2021
WASHER-FRONT LOA FRIGIDAIRE FFFS5115PW0
"Customer concern of unit leaking from bottom left corner. Removed front panel. Inspected inlet valves, detergent drawer, door boot, pressure hose, drain hose, drain pump and fill hoses. No signs of water. Test cycled through rinse and spin, no leaks. Unable to verify complaint at this time. Advised customer to call back if problem persists."
Near Lakewood, WA 98499
Jacob P.
Job Details:
02/24/2021
RANGE JENN-AIR SVD48600B
"Installed previously ordered control board. Test cycled, all checks ok."
Near Auburn, WA 98001
Jacob P.
Job Details:
02/24/2021
DRYER-ELECTRIC FRIGIDAIRE FFQE5000QW1
"Customer concern of unit taking 2-3 cycles to dry clothes. Ran air flow test, failed. Removed vent from back of dryer and ran air flow test again, passed. Advised customer that vent from back of dryer to outside needs to be cleaned asap. Unit functioning as designed."
Near Graham, WA 98338
Jacob P.
Job Details:
02/24/2021
WASHER-TOPLOAD WHIRLPOOL WTW8240YW0
"Installed previously ordered bearing kit, suspension rods and hub. Test cycled, all checks ok. Advised customer to wait 24 hours before running machine to let glue dry."
Near South Hill, WA 98375
Jacob P.
Job Details:
02/23/2021
WASHER-FRONT LOA WHIRLPOOL WFW8540FW0
"Customer concern of unit not turning on. Customer stated that her daughter unplugged the machine and plugged it back in a few days ago and since then the machine has been working. Pulled error codes, no error codes stored. Ran unit through diagnostic checks, all checks ok at this time. Advised customer to call back if problem persists."
Near Tacoma, WA 98498
Jacob P.
Job Details:
02/23/2021
RANGE GE PGS975DEP1WW
"Customer concern of temps too low. Test cycled oven, found temps about 25 degrees low. Adjusted oven temps up 25deg. Test cycled, all checks ok."
Near Gig Harbor, WA 98332
Jacob P.
Job Details:
02/23/2021
DRYER-ELECTRIC GE GTD42EASJ2WW
"Customer concern of unit taking too long to dry. Ran air flow test, yellow. Cycle tested temps ×5, 105-195. Removed vent, ran air flow test again, green. Advised customer that vent from back of dryer to outside needs to be cleaned. Machine functioning as designed."
Near Spanaway, WA 98387
Jacob P.
Job Details:
02/22/2021
WASHER-FRONT LOA ELECTROLUX EFLW317TIW1
"Installed previously ordered shocks. Test cycled, all checks ok."
Near Gig Harbor, WA 98332
Jacob P.
Job Details:
02/22/2021
WASHER-FRONT LOA SAMSUNG WF50K7500AV/A2 11
"Installed previously ordered inverter board. Test cycled, all checks ok."
Near Bonney Lake, WA 98391
Jacob P.
Job Details:
02/22/2021
DRYER-ELECTRIC SAMSUNG DVE50M7450W/A3
"Installed previously ordered control board. Test cycled, all checks ok."
Near Spanaway, WA 98387
Jacob P.
Job Details:
02/22/2021
DISHWASHER LG LDP6797BD
"Customer concern of unit making weird sound when draining. Found debris in drain pump causing sound. Removed debris. Test cycled, all checks ok."
Near Graham, WA 98338
Jacob P.
Job Details:
02/22/2021
WASHER-FRONT LOA SAMSUNG WF45M5500AZ/A5
"Installed previously ordered drain pump. Test cycled, all checks ok."
Near Puyallup, WA 98374
Jacob P.
Job Details:
02/19/2021
RANGE FRIGIDAIRE PLEB30S8CCC
"Installed previously ordered bake element. Test cycled, all checks ok."
Near Orting, WA 98360
Jacob P.
Job Details:
02/19/2021
RANGE GE JBS60RK2SS
"Installed previously ordered infinite switch. Test cycled, all checks ok."
Near Tacoma, WA 98446
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV395ETPASU/A2
"Customer concern of unit not heating. Found open heating element causing no heat. Also found seized idler pulley and rear rollers. Replaced heating element and idler pulley. Cleaned and lubed rear rollers. Delinted dryer. Ran air flow test, passed. Test cycled, all checks ok. ; used 1 DC93-00634A (IDLER ASSEMBLY), and 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"
Near Graham, WA 98338
Branden W.
Job Details:
02/19/2021
WASHER-FRONT LOA LG WM3875HVCA
Installed new door boot and heater. Cycle tested. All checks good. Left failed part with customer as it caused a water leak.
Near Tacoma, WA 98445
Branden W.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV50K8600EV/A3
Customer concern is that dryer makes squealing noise. Found worn drum roller causing noise. Replaced roller. Cleaned and lubed other rollers. Cycle tested. All checks good. ; used 1 DC97-16782A (DRUM ROLLER) from stock
Near Tacoma, WA 98445
Branden W.
Job Details:
02/19/2021
DISHWASHER WHIRLPOOL WDT750SAHZ0
Customer concern is that upper rack falls down. Found broken adjuster causing rack to fall. Replaced adjuster kit. All checks good ; used 1 W10712395 (ADJUSTER) from stock
Near Tacoma, WA 98405
Jacob P.
Job Details:
02/19/2021
DISHWASHER WHIRLPOOL WDTA50SAHZ0
"Installed previously ordered wash pump. Test cycled, all checks ok."
Near Gig Harbor, WA 98335
Jacob P.
Job Details:
02/19/2021
WASHER-TOPLOAD SAMSUNG WA45M7050AW/A4 02
"Installed previously ordered knob. Test cycled, all checks ok."
Near DuPont, WA 98327
Jacob P.
Job Details:
02/19/2021
DISHWASHER SAMSUNG DW80M9960US/AA
"Customer concern of unit not powering on. Tested voltage to machine, checks ok. Performed voltage checks to control panel, checks ok. Reassembled machine, unit now parts on. Test cycled, all checks ok."
Near Puyallup, WA 98375
Jacob P.
Job Details:
02/19/2021
RANGE WHIRLPOOL GR396LXGQ1
"Installed previously ordered hinges. Test cycled, all checks ok."
Near Spanaway, WA 98387
Branden W.
Job Details:
02/19/2021
DISHWASHER GE GDF620HMJ4ES
Installed previously ordered parts. Cycle tested. All checks good.
Near Tacoma, WA 98409
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV42H5000EW/A3 04
"Customer concern of dryer making squealing sound. Found worn idler pulley causing sound. Replaced idler pulley. Test cycled, all checks ok. ; used 1 DC93-00634A (IDLER ASSEMBLY) from stock"
Near Fircrest, WA 98466
Jacob P.
Job Details:
02/19/2021
WASHER-FRONT LOA MAYTAG MHW5500FW1
"Customer concern of lights on machine stayed on after cycle ended. Customer had load running upon arrival. Let cycle finish, only 'done' light on after cycle. Found door not opened between cycles error stored. Unable to verify complaint at this time. Advised customer to call back if problem persists."
Near University Place, WA 98466
Jacob P.
Job Details:
02/19/2021
DISHWASHER WHIRLPOOL WDT730PAHZ0
"Installed previously ordered adjusters. Test cycled, all checks ok."
Near University Place, WA 98466
Jacob P.
Job Details:
02/19/2021
WASHER-TOPLOAD SAMSUNG WA50F9A7DSW/A2
"Customer concern of unit not filling. Tested upon arrival, unit filled. Pulled error codes, lid lock error stored. Test cycled lid lock ×10, checks ok. Unable to verify complaint at this time. Advised to call back if problem persists."
Near Tacoma, WA 98465
Jacob P.
Job Details:
02/19/2021
WASHER-FRONT LOA SAMSUNG WF45R6300AV/US
"Customer concern of unit leaking. Customer stated they have ran unit twice since leak and it hasn't leaked again. Found door glass dirty causing poor seal. Cleaned door glass and door seal. Test cycled, all checks ok."
Near University Place, WA 98467
Jacob P.
Job Details:
02/19/2021
DISHWASHER KENMORE 66513122K701
"Customer concern of unit not filling. Tested upon arrival, unit fills. Tested in multiple cycles, unit fills, washes and drains. Unable to verify complaint at this time. Advised customer to call back if problem persists."
Near Tacoma, WA 98499
Jacob P.
Job Details:
02/19/2021
WASHER-TOPLOAD GE GTW680BSJ4WS
"Installed previously ordered control board. Test cycled, all checks ok."
Near Tacoma, WA 98408
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC MAYTAG MEDB765FW0
"Customer concern of dryer making loud grinding sound. Found debris in blower housing causing sound and lint build up and trap housing. Cleaned debris and lint out. Test cycled, all checks ok."
Near University Place, WA 98466
Jacob P.
Job Details:
02/19/2021
RANGE GE JGB720SEJ4SS
"Customer concern of gas smell. Customer advised they already had gas company out to check supply connections behind oven. Checked all surface burners and valves, and bake and broil valves. All checks ok."
Near Milton, WA 98354
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV330AEB/XAA 04
"Customer concern of unit making loud grinding sound. Found debris in blower housing causing sound. Removed debris. Test cycled, all checks ok."
Near University Place, WA 98467
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV48H7400EW/A2 02
"Customer concern of dryer making banging noise. Found right rear roller worn and idler pulley seized causing noise. Replaced roller and idler pulley. Test cycled, all checks ok. ; used 1 DC93-00634A ( IDLER ASSEMBLY), and 1 DC97-16782A (DRUM ROLLER) from stock"
Near Tacoma, WA 98467
Jacob P.
Job Details:
02/19/2021
DRYER-ELECTRIC SAMSUNG DV42H5200EF/A3 02
"Customer concern of unit making loud squealing sound and drum not moving. Found seized idler pulley causing sound and no drum movement. Replaced idler pulley. Test cycled, all checks ok. ; used 1 DC93-00634A (IDLER ASSEMBLY) from stock"
Near Puyallup, WA 98375
Jacob P.
Job Details:
02/19/2021
WASHER-TOPLOAD MAYTAG MVWB835DW4
"Installed previously ordered lid. Test cycled, all checks ok."
Near Edgewood, WA 98372
Jacob P.
Job Details:
02/12/2021
DISHWASHER KITCHENAID KUDS30IXSS6
"Installed previously ordered control board and control panel. Test cycled, all checks ok."
Near Puyallup, WA 98375
Branden W.
Job Details:
02/12/2021
DRYER-ELECTRIC MAYTAG MEDB765FW0
Customer concern is that dryer makes a rattling noise. Found elememt base loose causing noise. Secured base. Cycle tested. All checks good.
Near Puyallup, WA 98372
Branden W.
Job Details:
02/12/2021
WASHER-TOPLOAD MAYTAG MVWC565FW1
Customer concern is that washer makes grinding noise and does not work. Found failed actuator causing noise and not shifting causing no operation. Replaced actuator. Cycle tested. All checks good. ; used 1 WPW10006355 (ACTUATOR) from stock