Appliance Repair Gig Harbor Washington

RPS Repair Rated 4.8 out of 5 stars based on 39 customer reviews

We serviced a
MAYTAG DRYER-GAS
Model MGDC200XW1
Near Gig Harbor, WA 98332
Cameron M.
Job Details: 05/06/2024
"Customer concern is that dryer does not heat. Customer advised unit completed two dry cycles after tech. left then third Cycle unit failed to heat, customer then cleaned vent. Attempted dry cycle with timer set to 70 minute dry time at that point customer experienced no heat and unit failed to advance cycle time. Found open thermal fuse, causing unit to not heat and advance timer. Installed new thermal fuse. Preformed in vent temperature checks. vent on h-183 L-146 H-176.3 L-126 H-176.4 L-131.2 H-174.9 L-128.3 H-174.6 L-128.5Vent off-H-157.7 L-124.7 H-156.8 L-125.3 H-157.1 L-124.9 H-157.1 L-125.2 in range. Advised customer on regular cleaning of vent. Advised customer load size can also cause unit to produce higher than optimal temperatures during to load on motor. Advised customer lint screen needs to be cleaned with every cycle to allow sufficient air flow. NO CHARGE. ; used 1 WP3392519 (FUSE-THRML) from stock"
We serviced a
WHIRLPOOL DRYER-GAS
Model LGR7646JQ0
Near Gig Harbor, WA 98335
Cameron M.
Job Details: 05/03/2024
Installed previously ordered rear drum felt and front bearing. Cycle tested unit. All checks good collected remainder balance via card payment advised customer cannot use unit for 12-24 hrs to allow adhesive to cure.
We serviced a
KITCHENAID COOKTOP
Model KICU509XSS00
Near Gig Harbor, WA 98335
Cameron M.
Job Details: 05/02/2024
"Customer concern is that cooktop produces f47 errors. Found Unit actively triggering at time of arrival. Found service builtin from manufacturer, builtin advised if com errors are present module if defective and requires replacement. Attempted to sorce part for repair. Parts show NLA. Advised customer no repair available at this time. Provided customer part # and advised if able to locate module. Customer has ability to has us install without warranty. Collected diagnostic fee +tax via card payment"
We serviced a
MAYTAG DRYER-GAS
Model MGDC200XW1
Near Gig Harbor, WA 98332
Cameron M.
Job Details: 05/02/2024
"Customer advised unit stoped heating on advised cycle at time of arrival. Preformed airflow test pass. Using pressure, manipulated timer and unit began producing heat advised customer secondary defect caused by previously diagnosed timer defect.Installed previously ordered timer. Cycle tested unit. Unit operational preformed temperature checks, checks good. Collected remainder balance via card payment left failed part with customer."
We serviced a
LG WASHER-FRONTLOAD
Model WM2650HWA
Near Gig Harbor, WA 98332
Cejay
Job Details: 04/29/2024
"Installed previously ordered door seal, preformed service diagnostic cycle for leaks and to verify repair, all checks good. Collected payment via card."
ASU
Gig Harbor, Washington
09/21/2023
The scheduler was friendly and helpful. The repair person was knowledgeable and thorough, didn’t try to upsell any additional work. I had amateurly diagnosed the problem, he corroborated it with technology and fixed it professionally. The one year parts and labor warranty let’s me know they are confident with their service.
Overall Experience
Mary
Gig Harbor, Washington
05/19/2023
Overall Experience
Rick
Gig Harbor, Washington
12/29/2022
I highly recommend RPS Repair. Cameron was on-time, professional, and highly skilled. I will definitely use them for all of my future needs.
Overall Experience
Don
Gig Harbor, Washington
09/29/2022
Prompt, reliable, professional appearance. Completed necessary checks in a timely manner.
Overall Experience
Paul
Gig Harbor, Washington
08/17/2022
He came and did a great job and shared knowledge of the issues with my wife. Professional and courteous!
Overall Experience