Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.


How can we help?

Local Reviews
for Gig Harbor, WA

RPS Appliance Repair Rated 4.7 out of 5 stars based on 14 customer reviews

Map of Gig Harbor, WA

Great job!




Review of RPS Appliance Repair

Jacob arrived within the service window, had the required part in his van and completed the repair in one visit. He was very conscientious and ensured that the repairs were successful before he left. He also worked very clean, to the point of wiping his handprints off. Great technician!


Map of Gig Harbor, WA

Stress Free Fix




Review of RPS Appliance Repair

We expected what the problem was, and Jacob confirmed the problem we expected quickly. He did corrective action on the problem and fixed the issue quickly.


Map of Gig Harbor, WA

Leland and Karen Elvert




Review of RPS Appliance Repair

We had damage to our refrigerator doors a few months ago and are still waiting for a door to arrive. Only one has arrived. I call every day but only talk to an answer machine and no one calls back.


Response from RPS Appliance Repair:

We are sorry to hear about the issues you are having with your refrigerator. But I belive you have us confused with Sears. We have not worked on your refrigerator, We were there to perform preventative maintenance checks on your washer, microwave, dryer, cooktop, wall oven, range and dishwasher. It sounds like you need to reach out to Sears to have them advise about the status of your refrigerator. Thank you RPS Appliance Repair


Map of Gig Harbor, WA

Great service




Review of RPS Appliance Repair


Map of Gig Harbor, WA

Thank you!




Review of RPS Appliance Repair


Map of Gig Harbor, WA

Good call




Review of RPS Appliance Repair


Map of Gig Harbor, WA

Excellent Service from RPS




Review of RPS Appliance Repair

Jacob did an outstanding job completing the service. Work space was clean and the repair done to my satisfaction.


Map of Gig Harbor, WA

Great service




Review of RPS Appliance Repair

Nice to have the appliances check every year.


Map of Gig Harbor, WA

Bob




Review of RPS Appliance Repair

Jacob did a great job! Very knowledgeable and professional.


Map of Gig Harbor, WA

Washer Repair




Review of RPS Appliance Repair

Took a couple of visits, but Brandon found the problem and the machine has been operating like new.


Great Service




Review of RPS Appliance Repair

Very Thorough and Professional


Fast, professional service




Review of RPS Appliance Repair


Nope




Review of RPS Appliance Repair

Excellent service repair and fast!


Richard A




Review of RPS Appliance Repair

Great service.


Jacob P.

Jacob P.

DRYER-ELECTRIC GE DBXR453EA1WW "Installed previously ordered front and rear bearings. Test cycled, all checks ok."

Near 40th St Ct NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

COOKTOP KITCHENAID KECD807XSS0 "Installed previously ordered infinite switch and element. Test cycled, all checks ok."

Near 68th St NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DRYER-ELECTRIC KENMORE 11068062801 Customer concern of unit not heating. Found open heating element and broken connector on thermistor causing no heat. Needs new heating element and thermistor. ; ordrng 1 WP8557403 (Thermistor) and 1 WP8544771 (Heating element)

Near N Foxglove Dr NW, Gig Harbor, WA 98332
Branden W.

Branden W.

COOKTOP KITCHENAID KECD807XSS0 Tech was assigned as a helper;

Near 68th St NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER KENMORE 66512783K310 "Customer concern of unit shutting down early. Found inlet valve and fan error stored. Tested ohms on fan and valve, both checks ok. Control board shutting unit down before cycle finished. Also found some segments on control panel burnt out or dim. Needs new control board and control panel. Customer declined repair."

Near Danforth St NW, Gig Harbor, WA 98329
Jacob P.

Jacob P.

RANGE KENMORE 79074333313 "Customer concern of unit not heating. Found weak igniter causing no heat. Replaced igniter. Test cycled, all checks ok. ; used 1 WB13k21 (Igniter) from stock"

Near 125th St NW, Gig Harbor, WA 98329
Jacob P.

Jacob P.

DISHWASHER WHIRLPOOL WDT750SAHZ0 "Customer concern of upper rack falling down. Found broken adjusters causing rack to fall. Replaced adjusters. Test cycled, all checks ok. ; used 1 W10712395 (ADJUSTER) from stock"

Near 54th St NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

RANGE SAMSUNG NE59J7630SS/AA 03 "Installed previously ordered display. Test cycled, all checks ok."

Near 77th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DRYER-ELECTRIC SAMSUNG DV50F9AEVWA/A2 "Customer concern of unit not heating. Found open heating element causing no heat. Also found seized idler pulley. Replaced heating element and idler pulley. Test cycled, unit now heats. Ran air flow test, failed. Advised customer that vent from back of dryer to outside needs to be cleaned asap.; used 1 DC93-00634A (IDLER ASSEMBLY), and 1 DC97-14486A (ELEMENT ASSEMBLY) from stock"

Near 64th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

WASHER-TOPLOAD GE WHDRR418G2WW "Came to install previously ordered parts. Found hub nut fused to basket, unable to remove without cutting basket. Called ahs, ahs supplying basket. ; ordrng 1 WH45X10060 (Basket)"

Near 56th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER KENMORE 66512783K310 "Customer concern of unit shutting down mid cycle. Found inlet valve error stored. Test cycled all components through service mode, all checks ok. Unable to verify issue at this time. Advised customer to call back if problem persists."

Near Danforth St NW, Gig Harbor, WA 98329
Jacob P.

Jacob P.

DRYER-ELECTRIC KENMORE 11071633610 "Customer concern of unit not starting. Found open thermal fuse causing no start. Also found open hi limit and thermistor ohms out of range. Needs new thermal fuse, thermistor and hi limit. Advised customer that thermal fuse is out of stock and may take awhile to arrive. ; ordrng 1 W10909685 (Thermal fuse) and 1 WP3391912 (Hi limit) and 1 WP8577274 (Thermistor)"

Near 53rd Ave NW, Gig Harbor, WA 98332
Jacob P.

Jacob P.

DRYER-ELECTRIC GE DBXR453EA1WW Customer concern of unit making loud squealing sound. Found front and rear bearings completely worn through. Needs new front and rear bearing. ; ordrng 1 WE25M40 (Rear bearing) and 1 WE49X20697 (Front bearing)

Near 40th St Ct NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER KENMORE 66513889K800 Customer concern of long delay between starting cycle and unit actually washing. Found dead spot on wash pump causing no start and control board sending intermittent voltage. Needs new wash pump and control board. Advised customer she will need to call in to Sears for repair service.

Near 34th St NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

OVEN-WALL n/a "Customer concern of lower oven and upper oven not heating. Found lower oven bake element broken and upper oven elements not receiving voltage. Needs new lower oven bake element and control. No model and serial tag. Unable to research parts. Called into AHS, AHS putting machine into replacement options. Auth code 90tlcm."

Near Peacock Hill Ave, Gig Harbor, WA 98332
Jacob P.

Jacob P.

DRYER-ELECTRIC AMANA NED4655EW1 "Customer concern of dryer not starting. Found open thermal fuse causing no power. Replaced thermal fuse. Test cycled, unit now starts. Ran air flow test, failed. Advised customer that vent needs to be cleaned before using the machine or failure will happen again. ; used 1 WP3392519 (Thermal fuse) from stock"

Near Point Fosdick Dr, Gig Harbor, WA 98335
Jacob P.

Jacob P.

WASHER-FRONT LOA LG WM9000HVA "Customer concern of unit not draining. Found in impeller detached from drain pump causing no drain. Replaced drain pump. Test cycled, all checks ok. ; used 1 4681EA2001T (Drain pump) from stock"

Near Buckhorn Pl, Gig Harbor, WA 98332
Jacob P.

Jacob P.

DISHWASHER KENMORE 66514793N511 "Performed pm check on dishwasher, all checks ok."

Near 40th Ave Ct NW, Gig Harbor, WA 98332
Jacob P.

Jacob P.

RANGE KITCHENAID KSEG950ESS1 "Customer concern of F9E0 error (mis wired error). Checked main control power and display, checks ok. Checked power cord and terminal block, checks ok. Needs new control board. Advised customer part is out of stock and may take awhile to arrive. ; ordrng 1 W11100515 (Control board)"

Near Point Richmond Beach Rd NW, Gig Harbor, WA 98332
Branden W.

Branden W.

DISHWASHER FRIGIDAIRE FGHD2472PF0A Customer concern is that dishwasher leaks during cycle. Found drain hose cracked at wall drain drain connection causing leak. Ordering new drain hose. Collected 75.00 deductible via card. Next appointment 12/17 10-2; ordrng 1 5304494062 (Drain hose)

Near 66th Ave NW, Gig Harbor, WA 98332
Branden W.

Branden W.

WALL OVEN GE JT965S0K4SS Customer concern is that display for wall oven is dead and can not see Temps selected. Found failed control. Ordering new control. Next appointment 12/17 10-2; ordrng 1 WB27T10566 (OVEN CONTROL W/HARNESS)

Near 66th Ave NW, Gig Harbor, WA 98332
Jacob P.

Jacob P.

WASHER-TOPLOAD GE WHDRR418G2WW "Customer concern of unit not agitating or spinning. Found thermal fuse to motor open causing no power to motor. Also found unit has bad bearing. Needs new motor, mode shift selector and thermal fuse. Thermal fuse is discontinued. Ahs to supply parts. ; ordrng 1 WH38X10017 (Mode shift selector) and 1 WH20X10093 (Motor) and 1 WH49X10055 (Thermal fuse)"

Near 56th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER KENMORE 66514549N711 "Customer concern of unit not washing. Found inlet valve screen plugged causing machine to not fill enough. Cleaned inlet screen. Test cycled, all checks ok."

Near Crescent Valley Dr NW, Gig Harbor, WA 98332
Jacob P.

Jacob P.

WASHER-FRONT LOA MAYTAG MVWX655DW1 "Customer concern of unit not spinning and making a weird sound. Found stripped hub causing spin issue and sound. Replaced hub, performed calibration. Test cycled, all checks ok. ; used 1 W10528947 (Hub) from stock"

Near 108th St NW, Gig Harbor, WA 98332
Nick R.

Nick R.

WASHER-FRONT LOA MAYTAG MVWB850YW1 "Customer concern that washer is leaking. Unable to verify leak, I did find the tub ring not fully in place ( could be issue causing the leak) put tub right back in the right place cycle tested found no leaks."

Near 34th Ave Ct, Gig Harbor, WA 98335
Nick R.

Nick R.

DISHWASHER KITCHENAID KDTM354DSS4 Preformed pm check cycle tested all checks good

Near 76th Ave Ct NW, Gig Harbor, WA 98335
Nick R.

Nick R.

OTHER SAMSUNG RS275ACRS Preformed pm check cycle tested all checks good

Near 76th Ave Ct NW, Gig Harbor, WA 98335
Nick R.

Nick R.

WASHER-TOPLOAD WHIRLPOOL WTW8500DC0 Preformed pm check cycle tested all checks good

Near 66th Ave, Gig Harbor, WA 98332
Nick R.

Nick R.

DRYER-ELECTRIC SAMSUNG DV520AEP/XAA Preformed pm check cycle tested all checks good

Near Point Fosdick Dr, Gig Harbor, WA 98335
Nick R.

Nick R.

OTHER SAMSUNG RF23HCEDBSR/AA Preformed pm check cycle tested all checks good

Near Point Fosdick Dr, Gig Harbor, WA 98335
Branden W.

Branden W.

COOKTOP KITCHENAID KECD807XSS0 Customer concern is that front left burner does not operate and makes a buzzing noise. Found shorted burner and switch. Needs new front left burner and front left switch. Parts are back ordered. AHS to supply parts. 2 techs needed for repair. ; ordrng 1 WPW10178022 (elmnt-surf) and 1 WPW10234425 (switch-inf)

Near 68th St NW, Gig Harbor, WA 98335
Branden W.

Branden W.

RANGE WHIRLPOOL WFE540H0ES0 Customer concern is that there is debris between the door glasses. Showed customer how to clean between the glass. All checks good.

Near 32nd Ave, Gig Harbor, WA 98335
Nick R.

Nick R.

WASHER-FRONT LOA SAMSUNG WF42H5200AF/A2 01 "Customer concern that washer makes a humming sound at the start of a cycle, and that sometimes the washer takes a few minutes before it hits full speed spin, and that they have to power cycle to get the door to unlock. Found the pedestal making a vibrating noise, advised customer to tighten it up, also found the child lock was enabled causing the washer to lock every time it shutdown, advised Customer of child lock, also advised customer that ther washer spins at low speeds to begin with to even out the load. Washer performs as intended."

Near 51st Ave NW, Gig Harbor, WA 98332
Branden W.

Branden W.

WASHER-FRONT LOA MAYTAG MVWB850YW1 Installed new bearing kit. Cycle tested to max spin rpm. Checks good. Advised to not use until next day to let glue on tub seal set properly.

Near 34th Ave Ct, Gig Harbor, WA 98335
Branden W.

Branden W.

WALL OVEN KITCHENAID KODC304EBL00 Customer concern is that upper oven does not operate on convection bake or standard bake. Or will come to temp then will not maintain temp. Cycle tested in convection at 325drg and standard bake at 350deg. No issues found. Found customer not starting convection but standard bake. Advised how to start convection bake. Cycle tested lower oven Temps at customer request. No issues found. Tested to 350deg.

Near 51st St NW, Gig Harbor, WA 98335
Branden W.

Branden W.

WASHER-FRONT LOA GE GFW430SSM1WW Customer concern is that there is water coming from under dryer. No issues found with washer. Found inlet hose to steam valve on dryer loose causing a leak. Leak has caused water damage to trim. Tightened hose. No leaks. All checks good.

Near Echo Rock Pl, Gig Harbor, WA 98332
Jacob P.

Jacob P.

DRYER-ELECTRIC SAMSUNG DV45H7000EW/A2 01 "Customer concern of dryer not heating. Found open heating element causing no heat. Also found seized idler pulley and front left roller. Replaced heating element, idler pulley and roller. Cleaned and lubed other 3 rollers. Test cycled, all checks ok. ; used 1 Dc97-16782a (Roller), 1 Dc97-14486a (Heating element), and 1 Dc93-00634a (Idler pulley) from stock"

Near 80th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

RANGE SAMSUNG NE59J7630SS/AA 03 Customer concern of display on unit flashing and some segments not working. Found shorted display causing concern. Needs new display. Advised customer that part is back ordered and may take awhile to arrive. ; ordrng 1 DE07-00129A (Display)

Near 77th Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER WHIRLPOOL DU890SWLQ0 "Installed previously ordered spray arm. Customer advised that door is also hard to close, door seal is worn, timer is hard to turn, buttons are hard to push, soap dispenser doesn't open sometimes, heating element is either too hot or not hot enough, motor is too loud, doesn't always drain completely and dishes aren't coming out clean. Needs new door frame, tub, door seal, wash pump, timer, console, insert, switch, heating element and console. Console and insert are discontinued. Ahs to supply parts. ; ordrng 1 WPW10509257 (Door seal) and 1 WP9743028 (Door frame) and 1 3385508 (Insert) and 1 8269367 (Switch) and 1 WP8535368 (Timer) and 1 3384063 (Console) and 1 W10082653 (Tub) and 1 WPW10082894 (Heating element) and 1 WPW10247394 (Wash pump), states that autho needed"

Near 71st St Ct NW, Gig Harbor, WA 98335
Branden W.

Branden W.

WASHER-FRONT LOA MAYTAG MVWB850YW1 Customer concern is that washer is loud in the wash and spin cycle. Found failed tub bearing causing noise. Needs new bearing kit. Needs authorization. ; ordrng 1 W10435302 (bearing)

Near 34th Ave Ct, Gig Harbor, WA 98335
Branden W.

Branden W.

WASHER-TOPLOAD FISHER PAYKEL n/a Customer concern is that washer leaks a small amount of water from the bottom front. Cycle tested numerous times on all water levels. Unable to get washer to produce a leak. Only signs of water is at shaft seal on drain pump. No active leaks found. Advised to call if issues return.

Near 83rd St NW, Gig Harbor, WA 98332
Nick R.

Nick R.

DRYER-ELECTRIC KENMORE 11092822101 Preformed pm check cycle tested all checks good

Near 109th St NW, Gig Harbor, WA 98332
Nick R.

Nick R.

WASHER-FRONT LOA WHIRLPOOL 110GHW9160PW Preformed pm check cycle tested all checks good

Near Scott Ln, Gig Harbor, WA 98335
Jacob P.

Jacob P.

WASHER-TOPLOAD MAYTAG MVWB855D3 "Installed previously ordered lid lock. Test cycled, all checks ok. ; dspstn on spec-tagged invntry: 1 W10810403 LID LOCK ASSY"

Near 71st Ave NW, Gig Harbor, WA 98335
Jacob P.

Jacob P.

DISHWASHER SAMSUNG DW80F600UTS "Customer concern of unit not latching. Found door latch in closed position causing door not to shut. Opened latch. Test cycled, all checks ok."

Near 119th St Ct NW, Gig Harbor, WA 98332