A repair in Lindale, TX
GE washer not starting cycle: inverter board repair in Lindale
A GE washer in Lindale, TX, was stopping mid-cycle and failing to start properly. Inspection revealed a stored locked rotor error and an inability to detect basket speed. The technician replaced the inverter board and tested the washer to confirm proper operation.
What the customer noticed
The washer would not start a cycle or would cut out with water still in it.
What we found
Inspection in service mode found a locked rotor error and a failure to read basket RPM, pointing to a bad inverter board.
What we repaired
The inverter board was replaced, then the washer was run again in rinse and spin.
How we checked the result
After the repair, the washer filled, agitated, drained, and spun normally, and the basket RPM reading was correct.
