From our technicians
What happened. What we found. What we repaired.
A symptom tells part of the story. Here’s how our technicians found the cause and checked the result on real appliance repairs.
Showing 1 to 12 of 80 repair stories
A Maytag washer in Dallas was stopping shortly after starting a cycle and flashing "Done" due to a faulty actuator. The technician replaced the actuator and tested the washer to verify proper operation.
Read the repair story →Roy, WALG washer collecting water in door boot: drain port cleared in RoyAn LG washer in Roy was collecting water in the door boot due to a clogged drain port. The technician cleared the blockage, adjusted the detergent settings to address excessive suds, and tested the washer to confirm proper operation.
Read the repair story →Roy, WAGE range burner temperature control repair in RoyA GE range in Roy had a front-left burner that was not regulating temperature due to worn switch contacts. The technician replaced the faulty infinite switch and tested the range to confirm proper operation.
Read the repair story →Puyallup, WASamsung washer not draining: drain pump repair in PuyallupA Samsung washer in Puyallup was not draining due to a seized drain pump. The technician replaced the faulty pump and tested the washer to confirm proper operation.
Read the repair story →Little Elm, TXGE dishwasher cleaning issue fixed in Little ElmA GE dishwasher in Little Elm was not cleaning dishes properly due to a damaged lower spray arm hub that prevented rotation. The technician replaced the spray arm and pressure sensor, then tested the dishwasher for proper operation.
Read the repair story →FORNEY, TXSamsung refrigerator ice maker repair in ForneyA Samsung refrigerator in Forney had a broken ice maker issue. The fill tubes and ice maker assembly were replaced, then the unit was tested at the visit.
Read the repair story →Heath, TXGE dryer squealing noise repaired in HeathA GE dryer in Heath was making a squealing noise due to a worn idler. The technician replaced the idler and belt, then tested the dryer to confirm quiet, normal operation.
Read the repair story →LEWISVILLE, TXMaytag washer not completing cycle: drain pump connection repair in LewisvilleA Maytag washer in Lewisville was not completing its wash cycles due to a loose drain pump connection. The technician repaired the connection and performed multiple tests to confirm proper operation.
Read the repair story →Plano, TXWhirlpool dryer noisy in Plano: idler pulley repairA Whirlpool dryer in Plano was making unusual noises due to a seized idler pulley. The technician replaced the faulty pulley assembly and tested the dryer to confirm proper operation.
Read the repair story →Emory, TXMaytag washer out-of-balance noise fixed in EmoryA Maytag washer in Emory was going out of balance, making a loud noise and stopping cycles early. The technician leveled the unit, retested spin, and confirmed it was running normally at the time of service.
Read the repair story →Dallas, TXSamsung washer not completing cycle: drain pump motor repair in DallasA Samsung washer in Dallas was not completing its wash cycles due to a faulty drain pump motor. The technician replaced the motor and tested the washer to confirm proper operation.
Read the repair story →Buckley, WAFrigidaire dishwasher would not power in Buckley: power connection repairA Frigidaire dishwasher in Buckley would not power on or run a cycle. The technician found a shorted power supply connection, repaired it, and then tested the unit after the work was done.
Read the repair story →