What happened. What we found. What we repaired.

An LG washer in Rowlett was displaying a DE2 error code due to a faulty door lock. The technician replaced the door latch assembly and tested the washer to confirm proper operation.

A GE dishwasher in Parkland had a door that would fall open without resistance. The technician identified broken door springs and cables, replaced them, and tested the dishwasher to confirm proper operation.

A Whirlpool dishwasher in Allen was draining slowly and leaving standing water in the tub. The technician cleared food debris from the clogged drain hose and confirmed proper drainage.

A Whirlpool refrigerator in Coppell stopped dispensing water and making ice after a filter change. The technician identified a faulty water filter, replaced it, and confirmed proper operation.

A Whirlpool cooktop in Eatonville had a right-front burner stuck on high and a breaker-tripping issue. The technician replaced the faulty infinite switch and verified proper burner operation.

A Frigidaire freezer in Auburn was experiencing condensation buildup due to a faulty temperature control that prevented the compressor from operating. The technician replaced the failed cold control and verified that the compressor and fan were running, with a frost pattern beginning to form.

A Whirlpool dryer in Federal Way was shutting down after approximately 20 minutes due to an overheating motor. The technician replaced the motor and blower, then tested the dryer to confirm proper operation.

A Whirlpool washer in Garland was continuously running its drain pump due to a faulty control board. The technician diagnosed the issue, replaced the control board, and calibrated the washer to restore proper operation.

A Whirlpool refrigerator in Dallas had freezer drawer slides that were coming apart and freezing up. The technician identified the damaged slides, replaced them, and checked the refrigerator to confirm proper operation.

An LG washer in Graham was leaking water and allowing it to pool when the unit was not in use. The technician identified a leaking inlet valve assembly, replaced the hot and cold water inlet valves, and tested the washer to confirm proper operation.

A Whirlpool dryer in Spanaway would not start or tumble due to worn timer contacts. The technician diagnosed the issue, replaced the faulty timer, and tested the dryer to confirm proper operation.

A GE washer in Steilacoom was not draining or spinning due to a clogged drain pump strainer. The technician identified and cleared the blockage, then tested the washer to confirm proper operation.