A repair in DENTON, TX
Samsung washer stopped midcycle: drain pump and control repair in Denton
A Samsung washer in Denton stopped mid-cycle. Inspection revealed a control issue affecting the drain pump and an out-of-range pump reading. Both components were replaced, and the washer was tested to verify proper operation.

What the customer noticed
The washer stopped midcycle.
What we found
Testing found no voltage from the main control to the drain pump, and the pump resistance was out of range.
What we repaired
The drain pump and main PCB were replaced.
How we checked the result
After the repair, the washer drained properly and no other failures were found at service.




