From our technicians
What happened. What we found. What we repaired.
A symptom tells part of the story. Here’s how our technicians found the cause and checked the result on real appliance repairs.
Showing 85 to 96 of 179 repair stories
A KitchenAid wall oven in Dallas had a malfunctioning broiler. The technician diagnosed a faulty broil element, replaced it, and performed multiple function tests to confirm proper operation.
Read the repair story →Heath, TXFrigidaire refrigerator water dispenser restored in HeathA Frigidaire refrigerator in Heath stopped dispensing water after a filter change. Inspection showed no water pressure reaching the filter head. The filter head assembly was replaced and tested.
Read the repair story →Royse City, TXMaytag dryer not heating in Royse City: thermal fuse replacementA Maytag dryer in Royse City was not heating properly and intermittently had trouble tumbling at the start of a cycle. The technician identified a blown thermal fuse, replaced it, and tested the dryer to confirm that both heating and tumbling functions were working.
Read the repair story →Krugerville, TXSamsung dryer not powering on: breaker reset in KrugervilleA Samsung dryer in Krugerville would not power on due to a tripped circuit breaker. The technician identified the power supply issue, reset the breaker, and tested the dryer to confirm proper operation.
Read the repair story →Buckley, WAWhirlpool dryer intermittent stopping in Buckley: motor and blower repairA Whirlpool dryer in Buckley was intermittently stopping mid-cycle and restarting after cooling down. The technician identified an overheating motor, replaced the motor and blower wheel, and tested the dryer to confirm proper operation.
Read the repair story →GARLAND, TXSamsung dryer vent blockage cleared in GarlandA Samsung dryer in Garland was heating but not drying clothes properly due to restricted airflow. The technician found excess lint inside the dryer and a pinched vent hose, cleaned the lint buildup, and verified proper airflow.
Read the repair story →Spanaway, WAGE range burner not working on low: infinite switch repair in SpanawayA GE range in Spanaway had a right-front burner that would only heat on high and would not operate properly on low settings. The technician identified a faulty infinite switch, replaced the component, and verified proper operation.
Read the repair story →Fox Island, WAFrigidaire refrigerator defrost repair in Fox IslandA Frigidaire refrigerator in Fox Island had heavy frost buildup on the evaporator cover due to a faulty defrost heater and thermistor. The technician replaced both components and verified proper operation.
Read the repair story →Celina, TXFrigidaire refrigerator not cooling: evaporator fan motor repair in CelinaA Frigidaire refrigerator in Celina was not cooling properly, and its temperature alarm was sounding due to a faulty evaporator fan motor. The technician replaced the motor and verified proper airflow between the freezer and fresh food compartments.
Read the repair story →Garland, TXKitchenAid ice maker water inlet valve repair in GarlandA KitchenAid ice maker in Garland was experiencing water inlet issues due to a faulty inlet valve. The technician replaced the valve, restored water pressure, and tested the ice maker to confirm proper operation.
Read the repair story →Allen, TXFrigidaire refrigerator dispenser spray repair in AllenA Frigidaire refrigerator in Allen was spraying water from the dispenser due to a dislodged fill tube. The technician repositioned the tube and tested the refrigerator to confirm proper operation.
Read the repair story →Prosper, TXGE washer leak repaired with door boot replacement in ProsperA GE washer in Prosper was leaking water from the front due to a torn door boot. The technician replaced the damaged boot and tested the washer to confirm proper operation.
Read the repair story →



