Code plus cycle behavior
The displayed code is compared with what the washer actually does before and after the interruption.
LG washer repair
LG Washer Repair.
When an LG washer stops with water inside, shakes during spin, or will not complete a load, RPS tests the cycle and the components supporting it.
1 yearParts coverage
90 daysLabor coverage
30 daysRelated diagnosis
LifetimeVIP mechanical-parts warranty →With continuous membership
Qualifying customer-paid home repairs. Warranty terms apply.
What the symptom can mean
A diagnosis built around your LG washer.
LG washer codes such as OE, UE, IE, and DE describe what the control detected, not necessarily which part failed. We compare the code with fill, drain, balance, lock, motor, sensor, and control behavior. That separates a restriction or operating condition from an electrical or mechanical failure.
- OE code or water left in the tub
- UE code, repeated balancing, or violent vibration
- Washer will not fill or shows an IE code
- Door will not lock, unlock, or seal
- Water leaks during fill, wash, drain, or spin
- Grinding, humming, or cycle that will not finish
How we narrow it down
Useful details, direct testing, and a price before repair.
Drain and balance
Water removal, suspension, leveling, tub movement, sensing, and drive conditions are checked as needed.
Direct-drive systems
Motor, rotor, stator, position sensing, wiring, and controls are evaluated when the drum will not move correctly.
Find the model number: Look inside the door opening on front-load models or beneath the lid on many top-load models. Save the complete model suffix from the label.
Straight answers
LG Washer Repair questions.
Why is my LG washer showing OE and not draining?
OE means the washer did not drain as expected. A restricted filter or hose, pump problem, wiring, water-level information, or control condition can cause it. The drain path and pump operation should be tested together.
Why does my LG washer keep showing UE?
UE indicates the washer could not balance the load for spin. A single mixed load may be the cause, while repeated codes can involve leveling, suspension, tub movement, sensing, or drive conditions.
Can RPS repair both LG front-load and top-load washers?
RPS services many LG front-load and top-load washers. Service depends on the model, installation, parts support, safe access, and the address ZIP.
From our technicians
See how we handled a recent repair.
Real symptoms, repair findings, and the checks we made before finishing the job.
Puyallup, WALG washer door seal repair in Puyallup
An LG washer in Puyallup was leaking due to a damaged door seal. The technician replaced the seal and ran a diagnostic cycle to confirm the washer was operating properly without leaks.
Read the repair story →Roy, WALG washer collecting water in door boot: drain port cleared in RoyAn LG washer in Roy was collecting water in the door boot due to a clogged drain port. The technician cleared the blockage, adjusted the detergent settings to address excessive suds, and tested the washer to confirm proper operation.
Read the repair story →Rowlett, TXLG washer door lock repair in RowlettAn LG washer in Rowlett was displaying a DE2 error code due to a faulty door lock. The technician replaced the door latch assembly and tested the washer to confirm proper operation.
Read the repair story →Is the diagnostic free with repair?
Your diagnostic is free with repair. If you choose not to proceed or the appliance can’t be repaired, the visit is $129 plus applicable tax.
Your repair quote includes parts and national flat-rate labor. The technician explains the repair price before work begins.
Save on your next repair
